• Journal of Ceramic Processing Research
• /
• 제19권6호
• /
• pp.479-482
• /
• 2018

Polystyrene superstructure films show faint rainbow color, and this low color saturation limits its wide application. In this paper, polystyrene superstructure films with single bright blue color were prepared by vertical deposition self-assembly method using polystyrene microspheres with average diameter of $310{\pm}10nm$ as raw material. Polystyrene superstructure films were modified by adding nano-carbon powder, and effect of the amount of nano-carbon powde on color performance was studied. The results showed that without addition of nano-carbon powder, the superstructure films showed a faint rainbow color, while with addition of nano-carbon power, the superstructure films exhibited a single bright blue under the same natural light source. Changing the amount of nano-carbon powder addition could adjust color saturation of the film. With increasing the amount of nano-carbon powder addition from 0.008 wt% to 0.01 wt%, color saturation of the superstructure film increased gradually. Further increasing the amount of nano-carbon powder addition to 0.011wt%, color saturation of the superstructure film didn't increase anymore and tended to get dark.

• 한국통신학회논문지
• /
• 제38C권10호
• /
• pp.881-886
• /
• 2013

여러 대의 카메라를 이용하여 영상을 획득하는 다시점 카메라 시스템에서 각 시점의 색상이 서로 다르게 촬영되는 문제가 발생한다. 본 논문에서는 이런 색상 불일치 문제를 효과적으로 해결하기 위해 개선된 다항식 모델을 제안한다. 특징점 기반 대응점 추출 알고리즘을 이용하여 기준 시점과 다른 시점 간의 색상 대응 관계를 획득하고, 이를 이용하여 상대적인 매핑 곡선을 계산한다. 이때 비선형적인 관계를 반영하기 위해서 5차 다항 모델을 이용한다. 추출된 대응점의 동적 영역이 좁을 경우에 매핑 곡선의 정확도가 떨어지게 되는데, 이를 보완하기 위해서 매핑 곡선의 양 끝 부분을 1차 다항 모델을 이용하여 다시 추정한다. 이렇게 유추된 모델을 이용하여 색상을 보정하면, 추출된 대응점의 동적 영역에 강인하게 색상 불일치 문제를 해결할 수 있다. 제안한 방법은 색상 차트 촬영과 같은 전처리 과정이 필요하지 않기 때문에, 기존에 촬영된 다시점 영상에도 적용할 수 있다는 장점을 갖는다. 다양한 실험을 통해 제안한 알고리즘이 다른 최신의 알고리즘보다 보정 효과가 우수함을 확인했고, 객관적 평가에서도 우수한 성능을 보였다.

• 한국연초학회지
• /
• 제16권1호
• /
• pp.26-33
• /
• 1994

A tobacco ripeness grading meter was designed and constructed using the color sensor, its performance was evaluated. A degree of ripeness grading of a leaf is very closely related to the measured tobacco leaf color. Measuring the small amount of the reflectance precisely depends on the apparatus including color sensor, light source, detector sensitivity, and geometric characteristics of appratus. To analyze and minimize the variational effects, experiments to select the proper condition were performed. Because of the combined effect mentioned above, the system has some variation on its response. Basis on the results of the experiments, prototype was developed and interfaced to a computer system. The main components of prototype included a tungsten lamp as a light source, Amorphous full color sensor with three filters, regulated D.C. power supply, OP - AMP(741 TC) for amplification, AR - B3001 board for interfacing to a computer with analog to digital conversion, and a compatible IBM PC XT computer. The experimental results of the developed ripeness tobacco leaf measurement system are summarized as following: [1] The output readings of ripeness grade meter for tobacco leaf, which is based on harvesting time, showed the apparent difference in variety of different quality. It was considered suitable that three filters(red, green, blue) in Amorphous full color sensor could be used in four different ripeness degree measurement of tobacco leaf. [2] The output readings of ripeness grade meter for tobacco leaf, which is based on government procurement, showed apparent difference in variety of different quality. Tobacco leaf varieties to stalk position are divided into tips, leaf, cutters, and primings, It is considered suitable that only red filter in the sensor could be used to classify the grade of tobacco leaf within the same kind tobacco stalk. However, the ripeness grade meter was not adequate to classify all the tobacco grades in the four different tobacco leaves.

• 복식
• /
• 제64권8호
• /
• pp.179-190
• /
• 2014

In traditional costume, colors have been used to express the religion, society, culture, custom, and other aspects of a country. This is mainly due to color being the most conspicuous visual factor of a costume. In Thailand, there is a symbolic color for each day of the week, and the purpose of this study is to contribute to deeper understanding of the Thailand culture in regards to color and its costumes. The study method is as follows: literatures and photos were researched for social and religious background of the seven days Buddha history, which was the source of the color a day culture, symbols and significance of each Buddha were studied and precedent studies were reviewed. The study attempted to investigate the effect of the symbolic color on costumes as it passed down from generations. Originally, the symbolic colors of seven days Buddha in Thailand was a religious component that was exclusive to the upper class. However, it has expanded to the lower classes today. Currently, it obtains an aspect of health and wealth gospel for oneself or others as well as being used to express individual personality because people regard certain color as their symbolic color.

• 복식문화연구
• /
• 제16권2호
• /
• pp.397-407
• /
• 2008

Recently, influence of color has been expanded in various fields including design field. Among human five senses, visual sense is best for information capturing, and 80% of information judgment by visual sense is from color. Color is emotion and image. Hanbok is marked by its beautiful color combinations. The guiding principle of such color chords was Obangsaek, or the traditional Korean five base colors. The method of this study is to consider concepts of Obangsaek derived from the principles of yin-yang and the five elements and is to investigate application of Obangsaek. And the purpose of this study is to understand traditional colors and is to provide judgment criteria on various color combinations based on Korean aesthetic sense for development of textile design. The degree of nation culture depends on the level of research, analysis and application on traditional colors. Obangsaek, Korean traditional color is splendid and primary color. Also, Obangsaek has symbolic and lucky meanings. These colors are still the primary source of coloring. Obangsaek has been reinterpreted by application on textile design, some into base colors and others into diverse shades. So this study will help in the aspect of development on Korean style design.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.808-811
• /
• 2004

A full-color AMOLED display with an RGBW color filter pattern has been fabricated. Displays with this format require about $^1/_2$ the power of analogous RGB displays. RGBW and RGB 2.16inch diagonal displays with average power consumptions of 180 mW and 340 mW, respectively, are demonstrated for a set of standard digital still camera images at a luminance of 100 cd/$m^2$. In both cases, a white-emitting AMOLED is used as the light source. The higher efficiency of the RGBW format results because a large fraction of a typical image can be represented as white, and the white sub-pixel in an RGBW AMOLED display is highly efficient because of the absence of any color filter. RGBW and RGB AMOLED displays have the same color gamut and, aside from the power consumption difference, are indistinguishable.

• KSTLE International Journal
• /
• 제9권1_2호
• /
• pp.1-6
• /
• 2008

In this study is performed a complex lubrication analysis of a herringbone groove air journal bearing, which shows a big potential as an oilless bearing for a color wheel used as an original color source for a large DLP projection television and rotating at a rated-speed of 10,800 rpm. The Galerkin FE and perturbation methods are used for a lubrication analysis of the bearing. The effects of groove number, angle and depth and bearing clearance on the dynamic stability of the bearing are investigated in terms of the critical mass, and its equilibrium positions, stiffness and damping coefficients are calculated at various rotating speeds. Results have shown that the designed herringbone groove air journal bearing is quite suitable as a support bearing for the considered high-speed color wheel in terms of the complex lubrication performances of the bearing itself.

• 한국결정성장학회지
• /
• 제19권2호
• /
• pp.61-65
• /
• 2009

본 논문에서는 형광체가 없는 백색 LED의 성장과 광학적인 특성을 분석하였다. 혼합소스(miked-source) HVPE(hydride vapor phase epitaxy) 방법과 다중성장보트를 이용하여 MOCVD로 얇게 성장한 n-GaN 위에 활성층을 AlGaN으로 한 이종접합구조(DH; Doublehetero structure)를 성장하고, 패키징 단계를 거쳐 비형광체 단일칩 백색 LED 램프를 제작하였다. 패키징 한 소자를 주입전류 $10{\sim}100mA$로 변화시켜 측정한 결과 색 연색성 값은 72-93, 색좌표의 좌표값은 X값은 $0.26{\sim}0.34$, Y값은 $0.31{\sim}0.40$에서 가지며, 색온도는 $5126{\sim}10406K$ 범위에서 측정되었다. 또한 주입전류 증가 시, 형광체를 사용한 백색 LED는 청색 영역으로 이동하지만, 제작된 백색 LED는 황색영역으로 색좌표가 이동하였다. 이러한 특성을 통하여 고감도의 색 연색성 값을 가지는 비형광체 백색LED의 성장 가능성을 확인하였으며, 광 특성 분석 결과를 통하여 혼합소스의 성장 메커니즘을 제안하고자 한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권12호
• /
• pp.5507-5528
• /
• 2016

In computer vision, salient object is important to extract the useful information of foreground. With active contour analysis acting as the core in this paper, we propose a bottom-up saliency detection algorithm combining with the Bayesian model and the global color distribution. Under the supports of active contour model, a more accurate foreground can be obtained as a foundation for the Bayesian model and the global color distribution. Furthermore, we establish a contour-based selection mechanism to optimize the global-color distribution, which is an effective revising approach for the Bayesian model as well. To obtain an excellent object contour, we firstly intensify the object region in the source gray-scale image by a seed-based method. The final saliency map can be detected after weighting the color distribution to the Bayesian saliency map, after both of the two components are available. The contribution of this paper is that, comparing the Harris-based convex hull algorithm, the active contour can extract a more accurate and non-convex foreground. Moreover, the global color distribution can solve the saliency-scattered drawback of Bayesian model, by the mutual complementation. According to the detected results, the final saliency maps generated with considering the global color distribution and active contour are much-improved.

• Journal of Periodontal and Implant Science
• /
• 제31권3호
• /
• pp.501-511
• /
• 2001

Several indices have been developed that use bleeding and color changes as indicators of early gingival pathology. In the presence of gingivitis, vascular proliferation and reduction of keratinization owing to increase redness in gingiva. Descriptions of healthy gingiva are numerous, ranging from pale pink and coral pink to deep red and violet. This terms are not objective. Because of perception of color depends on a lot of factors such as light source, object, observer and so on. It is difficult to make an objective expression. Therefore the using of mechanical equipment is recommended to exclude these variables and observer's vias. The purpose of this study was to evaluate gingival color change after scaling & subgingival root planing. The other purpose of this study was to research the correlation of pocket depth, P.B.I. score and gingival color change. After photo-taking and storaging the image of gingival color into a computer, color change was examine with an image analysis program. Results were as follow; 1. Color of healed gingiva after scaling & subgingival root planing was significantly differ from color of inflamed gingiva(p<0.01). 2. Color of healed gingiva after scaling was similar to color of healed gingiva after subgingival root planing(p<0.05). 3. There was statistically significant correlation between color change of red component and pocket depth after scaling & subgingival root planing(p<0.01). 4. There was no correlation between color change of green, blue component and pocket depth after scaling & subgingival root planing(p<0.01). 5. There was statistically significant correlation between between color change of red component and P.B.I. score after scaling & subgingival root planing(p<0.01). 6. There was no correlation between color changes of green, blue component and P.B.I. score after scaling & subgingival root planing(p<0.01). 7. Increase of pocket depth and P.B.I. score were significantly correlated to the amount of color change(p<0.01). 8. P.B.I. score had a higher correlation with color change than pocket depth(p<0.01).