• Journal of Biosystems Engineering
• /
• v.23 no.1
• /
• pp.57-66
• /
• 1998

This study was conducted to investigate the relationships between parameters affecting internal quality of watermelon and its acoustic characteristics. The measuring and analyzing system was established to study the acoustic characteristics of watermelon. Algorithms for analyzing sound signals were developed. Sound signals which was detected with the microphone were filtered, and their spectrum was computed by means of the Fast Fourier Transform. As watermelon changed from the unripe stage to ripe, acoustic waves in time domain became complicated, and several components appeared in frequency domain. The correlationship was investigated between some parameters affecting internal quality of the watermelon and several peak frequencies. Results indicated that weight, density and sugar content had high correlations with several frequencies(the first peak frequency, the second peak frequency, and the third peak frequency). And the sugar content and the volume of the watermelon were highly correlated with the third peak frequency.

• Journal of Welding and Joining
• /
• v.14 no.6
• /
• pp.37-47
• /
• 1996

An ultrasonic testing uses the directivity of the ultrasonic wave which propagates in one direction. The directivity is expressed as the relationship between the propagate direction and its sound pressure. The directivity of ultrasonic wave is related to determination of testing sensitivity, scanning pitch and defect location. This paper investigated the directivity of ultrasonic wave, which scattered from slit defect located in heat-affected zone (HAZ) in butt joint using visualization method. The directivity of shear waves scattered from slit defect were different according to probe direction (far defect, near defect) and probe position (forward movement, maximum echo position, backward movement). The difference of directivity of reflection wave was existed between 2 MHz and 4 MHz angle probes. In the case of 2 MHz angle probe, the directivity of reflection wave was appeared sharp form because of the relation wave length and defect size.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.7
• /
• pp.576-582
• /
• 2008

This paper describes a synthesized photoelastic method developed for the visualization and evaluation of sound pressure distribution of elastic wave in a solid. The visualization of wave stress field is achieved by synthesizing two photoelastic pictures, in which the direction of the principal axis of linear polariscopes differs by $45^{\circ}$. From the analysis of the wave stress distribution using this method, it is possible to evaluate the characteristics of elastic waves in a solid, such as the intensity of stress, directivity and resolution characteristics of the wave emitted from a commercial probe, and characteristics of scattering from various types of defects.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.451-462
• /
• 2003

At the paper the method of 3D holographic moving image reconstruction is discused. The main idea of this method is based on the substitution of optically created static hologram by equal diffraction array created by acoustical (AO) field which formed by bulk sound waves. Such sound field can be considered as dynamic optical hologram, which is electrically controlled. At the certain moment of time when the whole hologram already formed, the reference optical beam illuminates it, and due to acoustooptical interaction the original optical image is reconstructed. As the acoustically created dynamic optical hologram is electronically controlled, it can be used for moving 3-dimentional scene reconstruction in real time. The architecture of holographic display for moving scene reconstruction is presented at this paper. The calculated variant of such display laboratory model is. given and discussed. The mathematical simulation of step by step images recording and reconstruction is given. The pictures of calculated reconstructed images are presented. The prospects, application areas, shortcomings and main problems are discussed.

• Journal of Korean Association for Spatial Structures
• /
• v.14 no.3
• /
• pp.67-74
• /
• 2014

The author has proposed and verified the accuracy through experiments on a method of measurement through the use of sound waves that not only can quantitatively measure each of the dual directions of the fiber axis with high accuracy of membrane tension created on the surface of the membrane structure, but also can be easily operated in the field of construction. This paper reports the solution for problems of variables caused in the process of downsizing of the measurement equipment in order for practical use, and verifies the correspondence possibility of various stress ratios.

• Journal of electromagnetic engineering and science
• /
• v.15 no.4
• /
• pp.213-218
• /
• 2015

A novel body-worn spiral monopole antenna is presented. The antenna consists of a ground plane and a spiral monopole. The antenna was designed for Ear-to-Ear (E2E) communication between In-the-Ear (ITE) hearing instruments at 2.45 GHz and has been simulated, prototyped, and measured. The antenna yielded a measured and simulated E2E path gain at 2.45 GHz of -82.1 dB and -85.9 dB, respectively. The radiation pattern of the antenna when mounted in the ear is presented and discussed.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.11
• /
• pp.92-99
• /
• 1996

The contact pressure in jointed plates was measured by means of an improved ultrasonic technique. In order to get calibration curve, the relationship between contact pressure and ratio of boundary and bottom echo of normal beam probes were obtained for the calibration blocks with various surface roughness. The ratio of boundary and bottom echoes were measured for the upper/under plates locally compressed with uniform pressure, and the distribution of contact pressure was obtaines. The measured pressure has a good agreement with results of FEM analysis. Thus the proposed ultrasonic method in this work is very useful to measure the contact pressure.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.11
• /
• pp.124-131
• /
• 2001

Fault diagnosis of an assembled small motor relies usually on human experts hearing ability. The quality of diagnosis depends, however, heavily on physical conditions of the human experts. A fault diagnosis system for assembled small motors is developed using artificial neural network (ANN) in this paper. It is consisted of sound sampling device and fault diagnosis software package. Six parameters are defined to characterize the sampled sound waves. The Levenberg-Marquardt Backpropagation (LMBP) Algorithm is used to diagnose the fault of assembled small motors. Experimental results for more than two hundred small motors verify the performance of the developed system.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.9 s.102
• /
• pp.1060-1069
• /
• 2005

Silencers are engineering devices that are designed to attenuate sound waves propagating in a flowing medium. The muffler type silencer has a series of chambers in parallel or series utilizing the reflection and expansion characteristics of the expansion chambers, sidetubes, branch resonators, and tailpipes to attenuate the sound. To Improve the performance of industrial blower silencer of muffler type which is employed in petrochemical plant, this paper seeks its optimal arrangement of buffs by experimental method and suggests optimal arrangement of buffs. Experimental results show that the optimal one suggested can reduce the noise level as much as 14 dB (or 18 dB(A)) in the laboratory and as much as 4 dB(A) compared to that of the existing silencer on the ground.

• Journal of KSNVE
• /
• v.5 no.1
• /
• pp.123-132
• /
• 1995

The microphonic phenomenon in TV(television) is a phenomenon that a stained pattern locally appears in the screen or moves like waves. This can be observed when audio signal of TV has specific frequencies under loud volume of sound. In this study, microphonic phenomenon has been investigated, and two practical ways of circumventing this has been proposed. Based on modal analysis of several TV parts(Cathod Ray Tube, shadowmask, etc.), it was proved that the microphonic phenomenon is caused by the resonance of the shadow mask. One of the proposed ways to circumvent this phenonenon is increasing the thickness of the frame, the other is removing the middle welding points between the frame and the shadow mask. The effects of these modifications are evaluated by the finite element analysis, and the results show that the magnitude of vibration of shadow mask reduced by 10 - 20dB, which is large enough to provent microphonic phenomenon even under maximum level of sound volume.