• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.9
• /
• pp.1284-1291
• /
• 2002

Combustion instabilities are an important concern associated with lean premixed combustion. Laboratory-scale dump combustor was used to understand the underlying mechanisms causing combustion instabilities. Experiments were conducted at atmospheric pressure and sound level meter was used to track the pressure fluctuations inside the combustor. Instability maps and phase-resolved OH chemiluminescence images were obtained at several conditions to investigate the mechanism of combustion instability and relations between pressure wave and heat release rate. It showed that combustion instability was susceptible to occur at higher value of equivalence ratio (>0.6) as the mean velocity was decreased. Instabilities exhibited a longitudinal mode with a dominant frequency of ∼341.8 Hz, which corresponded to a quarter wave mode of combustor. Heat release and pressure waves were in-phase when instabilities occurred. Rayleigh index distribution gave a hint about the location where the strong coherence of pressure and heat release existed. These results also give an insight to the control scheme of combustion instabilities. Emission test revealed that NOx emissions were affected by not only equivalence ratio but also combustion instability.

• Journal of East-West Nursing Research
• /
• v.13 no.2
• /
• pp.107-117
• /
• 2007

Purpose: This study was to examine the possibility of the contact with pornographs of elementary school boys and girls and to confirm responses after that, and to compare the feeling of sexual conflict between the boys and girls. Methods: The subjects were 952 5th and 6th graders of elementary school in four city areas(456 boys, 496 girls). Data collection was via questionnaires Results: Except several pupils(34.4% of boys, 27.4% of girls), most of subjects of the study had no contact with pornographs. The response after the contact with pornographs was feeling of shame the most, which was a negative reaction. The sexual conflict appeared more in pupils who had contact with pornographs than in those who had not boys(t=3.84, p<.000), girls(t=3.96, p<.000), which showed a significant difference. However, the conflict between boys and girls was not significant statistically. Conclusion: We would like to suggest that a sound control system must be prepared and a development of programs related to sexual education and promotion of ability fighting against them that can release their impulse of sex.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.787-790
• /
• 1997

This paper proposes a method which selects essential elements in a human evaluation model using the Choquet integral based on fuzzy measures, and applies the model to the evaluation of human interface. Three kinds of concepts are defined to select essential elements. Increment Degree implies the increment degree from fuzzy measures of composed elements to the fuzzy measure of a combined element. Average of Increment Degree of an element means the relative possibility of superadditivity of the fuzzy measure of each combined element. Necessity Degree means the selection degree of each combined element as a result of the human evaluation. A task experiment, which consists of a static work and two dynamic works, is performed by the use of some human interfaces. In the experiment, (1) a warning sound which gives an attention to subjects, (2) a color vision which can be distinguished easily or not, (3) the size of working area and (4) a response of confirmation that is given from an interface, are considered as human interface elements. Subjects answer the questionnaire after the experiment. From the data of the questionnaire, fuzzy measures are identified and are applied to the proposed model. Effectiveness of the proposed model is confirmed by the comparison of human interface elements extracted from the proposed model and those from the questionnaire.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.202-205
• /
• 2004

This paper represents the role of pinna in localizing target direction. Specially, this paper described what is the role of right-side pinna versus left-side pinna. In this experiment, one side of the pinna function was distorted intentionally by inserting a short tube on the ear canal. The localization error caused by right and left side pinna distortion was investigated. Since a laser pointer showed much less error (0.5%) in localizing target position than FASTRAK (30%) that has been generally used, it was used for the pointing task. It was found that harmonic components were not essential for the auditory target localization, however, non-harmonic nearby frequency components were more important to localize target direction of sound. We have found that the right pinna is one of the most important functions in localizing target direction and pure tone with only one frequency component is confusing for localization.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.569-572
• /
• 2005

This paper proposed the design and implementation of a DSP platform for the various multimedia streaming. The DSP platform synchronizes with host PC to configure DSP and to transmit multimedia streaming through PCI. The suggested DSP platform decodes high-capacity video/audio data using the suggested high-speed FIFO, CPLD and memory interface. The buffer control techniques is proposed in other to avoid the under/over-run of the audio/video data during the audio/video decoding. For the DSP platform test, host PC transmits program stream(PS) that consists of the MPEG-2 video MP@ML and 5.1ch AC3 audio data (Coyote.mov file, half hour running time) to DSP platform. The DSP platform plays continuously back the high sound-quality audio and high-definition video at once.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.4
• /
• pp.437-444
• /
• 2004

To control algal bloom in reservoirs in Korea, artificial circulation systems have been applied. Diffuser block aeration systems have been increasingly used in Korean reservoirs especially for shallow ones. However, there has been no sound theoretical background for the design and operation of the system. Also there has not been sufficient post-installation studies to validate the effectiveness of the system. As a result, it has been repeatedly reported that the success of the system is not certain. Proper consideration on thermal stratification regimes of reservoirs and flow dynamics induced by bubble plumes are essential elements in design processes of the aeration system. This paper discusses the current methods in the design of diffuser type aeration system and suggests a new design method based on fluid mechanical theory. Example calculations were discussed using observed data of the Yeoncho Dam and it seems that the results represent the current situation successfully.

• Restorative Dentistry and Endodontics
• /
• v.41 no.3
• /
• pp.196-201
• /
• 2016

Objectives: The aim of this in vitro study was to evaluate the effect of incorporating three different nanobiomaterials into bleaching material on microhardness of bleached enamel. Materials and Methods: The crowns of 24 extracted sound human molars were sectioned. Sixty enamel specimens ($2{\times}3{\times}4 mm$) were selected and divided into five groups (n = 12): Group 1 received no bleaching procedure (control); Group 2 underwent bleaching with a 40% hydrogen peroxide (HP) gel; Groups 3, 4, and 5 were bleached with a 40% HP gel modified by incorporation of bioactive glass (BAG), amorphous calcium phosphate (ACP) and hydroxyapatite (HA), respectively. The enamel microhardness was evaluated. The differences in Knoop microhardness data of each group were analyzed by one-way ANOVA, followed by post hoc Tukey tests. Results: Significant differences were observed between the study groups. The enamel microhardness changes in Groups 1, 3, 4, and 5 were significantly lower than that of Group 2 (p < 0.001). Conclusions: Within the limitations of this study, it can be concluded that incorporation of each one of the three tested biomaterials as remineralizing agents might be effective in decreasing enamel microhardness changes subsequent to in-office bleaching.

• Proceedings of the Society of Korea Industrial and System Engineering Conference
• /
• 2002.05a
• /
• pp.387-396
• /
• 2002

Batch processes are a significant class of processes in the process industry and play an important role in the production of high quality speciality materials. Examples include the production of semiconductors, chemicals, pharmaceuticals, and biochemicals. With on-line sensors connected to most batch processes, massive amounts of data are being collected routinely during the batch on easily measured process variables such as temperatures, pressures, and flowrates. In this paper, multivariate SPC charts for on-line monitoring of the progress of new batches are developed which utilize the information in the on-line measurements in real-time. We propose the formation of statistical model which describes the normal operation of a batch at each time interval during the batch operation. An on-line monitoring scheme based on the proposed method can handle both cross-correlation among process variables at any one time and auto-correlation over time. And the control limits for the monitoring charts are established from sound statistical framework unlike previous researches which use the external reference distribution. The proposed charts perform real-time, on-line monitoring to ensure that the batch is progressing in a manner that will lead to a high-quality product or to detect and indicate faults that can be corrected prior to completion of the batch. This approach is capable of tracking the progress of new batch runs, identifying the time periods in which the fault occurred and detecting underlying cause.

• Journal of Korean Elementary Science Education
• /
• v.20 no.1
• /
• pp.31-43
• /
• 2001

The purposes of this study were grasping the degree of students' understanding for course contents through the concept mapping strategy as meaningful learning in science and measuring the effect for change of conception and changing the misconception. The results of the study were as follows: 1. Before the lesson, only 10.7％ of students had scientific conception of molecular motion. Other students had various kinds of misconceptions. 2. The extent of concept formation after lesson through the using concept mapping strategy was tested. As a result, compared with the controlled group, the experimental group showed higher extent of sound concept formation (statistical significance level 0.05). 3. The differences between the experimental group and the control group were analyzed into quantitative and qualitative points of view. The results of the comparison showed that the maps of the students were well configured in the categories of the relationship, the hierarchy and the examples; while students showed lower abilities in the category of the cross-links. 4. The student's attitudes to ward concept mapping was positive. Most of the students answered that teaching strategy of concept mapping benefits them in meaningful learning outcomes.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.7
• /
• pp.2375-2385
• /
• 1996

As a compression wave is emitted from a duct, an impulsive wave generates and causes an impulsive noise that is at present a serious environmental noise pollution. In order to clarify the acoustic characteristics of the noise and to reduce their pressure levels, a series of model experiments were conducted on the impulsive waves emitted from an open end of a shock tube. The impulsive waves with various intensities were obtained by controlling the operation pressure ratio of the shock tube. Various kinds of silencers such as the exit boxes with baffle plates, were applied to the duct exit to reduce the impulsive noises. The effects of geometry of silencers and shock Mach number on the noise reduction were clarified. From the measurements of sound pressure level, it was found that installing the baffle plate into the exit box is effective in lowering the noise level at far fields, and that the recommendable geometries of silencer are L/D=1, H/D=1 and H/D=0.75.