• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.1217-1220
• /
• 1987

We have developed a Ultra Sound Pulsed Doppler System with two-dimensional M-mode image and Spectrum analyzer. The image of the M-mode is composed of time and depth axes. The Spectrum analyzer shows the spectrum of Doppler signal which represents the velocity component of time dependent blood-flow behavior. The spectrogram using Spectrum analyzer is composed of frequency and amplitude axes. The outputs of the system are audio signals, velocity curves, velocity profiles, M-mode images and spectrogram.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2508-2510
• /
• 2001

Frequency of cavity vibration in air flowing tube is closely related to a velocity of air. In this research, an instrumentation system to estimate frequency of cavity vibration for measurement of the velocity and quantity of a moving fluid is implemented by using DSP TMS320C32. Measurement of the generated sound wave frequency in cavity is difficult because of environmental noise. Adaptive filters are used to eliminate this noise effectively. The estimated velocity and quantity of a moving fluid by proposed system is compared with the results measured by a standard flow meter.

• 한국수산과학회지
• /
• 제7권1호
• /
• pp.28-36
• /
• 1974

꽂게 (Portunus trituberculatus) 240미, 민꽂게(Charybdis japonica) 78미 등을 2월 21일 부터 8월 7일 까지 사육하면서, 이들이 먹이를 먹을 때 내는 소리를 녹음실의 간이 수조속에서 녹음하고, 행동을 관찰하였으며, 녹음된 소리를 증폭시켜 무향 수조 속에서 수중 스피커로 방성하였을 때, 수조속 꽃게들의 반응결과와 녹음된 소리를 분석한 결과를 요약하면 다음과 같다. 1. 꽃게들이 내는 소리의 음압은 크기별, 군별로 다르며, $52\~124db$이고, 주파수는 $250\~1000Hz$이다. 2. 꽃게의 내는 소리를 방성할때 추음효과는 약 $70\%$이다. 3. 꽃게의 추음속도는 $3\~6cm/sec$이며, 스피커에 도달한 게는 그곳을 떠나지 않는다. 4, 꽃게의 소리를 이용하여 음향어법에 적용할 때 꽃게의 크기는 갑장 $5.6\~6.5Cm$, 갑폭 $12.6\~15cm$인 암컷이 적당하다.

• 한국초등과학교육학회지:초등과학교육
• /
• 제35권4호
• /
• pp.389-405
• /
• 2016

The purpose of this study was to analyze elementary school teachers' understanding, certainty, and familiarity with 13 key concepts of wave physics that are presented in textbook and teacher's guidebook. 123 elementary school teachers answered concept tests and questionnaires. In the results to these tests and questionnaires, teachers demonstrated a high level of understanding and high certainty in understanding with regard to the concepts of sound generation, effect of medium on wave, timbre, wavelength, and trough and crest of wave. For the topics of sound velocity, wave reflection and wave transmission, teachers demonstrated a high level of understanding but low certainty in understanding. With regard to sound propagation, teachers demonstrated a low level of understanding and an improperly high certainty in that low understanding. Teachers lacked knowledge, i.e., displayed a low level of understanding and low certainty in sound strength, sound frequency, constructive interference and destructive interference. In constructive and destructive interference, the teachers also displayed a low level of familiarity. We analyzed the differences in teacher's understanding, certainty, and familiarity according to teacher demographics defined by the teacher's gender, teaching experience with concepts of sound, career, curriculum track while in high school, and major in university. There were no significant differences in understanding, certainty, or familiarity as defined by gender, teaching experience, and career. However, these displays of knowledge were affected by the teacher's curriculum track in high school and their major. These results suggest that the teacher's understanding of, familiarity with, and certainty in wave physics concepts are more influenced by their learning experience than by their teaching experience. Therefore, we suggest additional learning opportunities for teachers (such as teacher training programs) in order to improve teacher knowledge and correct teacher misconceptions in wave physics.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.941-945
• /
• 2006

In the development of electricity generating wind turbines for wind farm application, only two types have survived as the methods of power regulation; stall regulation and fun span pitch control. The sound measurement procedures of IEC 61400-11 are applied to field test and evaluation of noise emission from each of 1.5 MW and 660 kW wind turbine generators (WTG) utilizing the stall regulation and the pitch control for the power regulation, respectively. Apparent sound power level, wind speed dependence and third-octave band levels are evaluated for both of WTGs. It is found that while 1.5 MW WTG using the stall control is found to emit lower sound power than 660 kW one using the pitch control at low wind speed (below 8 m/s), sound power from the former becomes greater than that of the latter in the higher wind speed. Equivalent continuous sound pressure levels (ECSPL) of the stall control type of WTG vary more widely with wind speed than those of the pitch control type of WTG These characteristics are believed to be strongly dependent on the basic difference of the airflow around the blade between the stall regulation and the pitch control types of WTG. These characteristics according to the methods of power regulation lead to the very different noise emission characteristics of WTG depending on the seasons because the average wind speed in summer is lower than the critical velocity over which the airflow on the suction side of blade in the stall types of WT are separated. These results propose that, in view of environmental noise regulation, the developer of wind farm should give enough considerations to the choice of power regulation of their WTG based on the weather conditions of potential wind farm locations.

• 한국음향학회지
• /
• 제41권6호
• /
• pp.601-609
• /
• 2022

2007년 8월 동해 연안에서 연안용승 현상이 발생 되었고, 이에 따른 수직적인 수온과 염분 자료가 실시간 해양관측부이를 통해 획득되었다. 시계열 관측자료를 기반으로 연안용승 발생 전·중·후의 수직적인 음속구조를 산출하였고, 연안용승의 수평적인 규모와 실제 해저지형 등을 고려한 음향모델링을 통해 연안용승이 수중의 음파 전달과 탐지환경에 어떠한 영향을 미치는지 분석하였다. 포물선 방정식 모델을 이용한 저주파(500 Hz) 음파 전달손실과 심도별 표적 탐지거리를 비교·분석한 결과, 동해 연안에서 용승이 발생하면 그렇지 않은 일반적인 음탐환경에 비해 최대 약 10 dB의 탐지이득을 기대할 수 있는 것으로 분석되었다. 또한, 이번 연구를 통해 용승 전·후 약 2 ~ 3일의 짧은 기간 내에서도 음파전달 특성이 크게 달라질 수 있음을 확인하였다.

• 한국음향학회지
• /
• 제25권4호
• /
• pp.184-190
• /
• 2006

최근에 Lee 등은 1차원 수평배열 센서만을 사용하여 다중경로를 통해 들어오는 신호로부터 표적의 3차원 위치를 추정하였다. 그러나 이 기법에서 음속은 수심에 상관없이 일정하다고 가정하였기 때문에 음속이 수심에 따라 다양하게 변화하는 실제 해양환경에서는 그 추정 성능이 현저하게 저하된다. 따라서 본 논문에서는 비균일 음속 환경에 적합한 근거리 표적의 3차원 위치추정 기법을 제안한다. 제안한 기법에서는 선형의 음속구조를 가지는 근거리 다중경로 환경에서 음파전달 모델을 기반으로 한 위치추정함수를 구성하였으며 이로부터 표적의 방위각, 거리 및 깊이를 3차원 탐색을 통하여 추정하였다. 선형 음속구조 및 실제 환경과 유사한 비선형 음속구조를 적용하여 제안한 기법의 성능을 기존의 기법과 비교, 분석하였으며 기존의 기법에 비해 거리 추정 오차는 최대 100m, 깊이 추정 오차는 50m정도 감소됨을 확인하였다.

• 한국정보통신학회논문지
• /
• 제18권5호
• /
• pp.1061-1066
• /
• 2014

천해에서 음파 전달은 매우 복잡하며, sparse한 전달 특성을 갖는다. 이러한 환경에서 수중음향통신 시스템의 성능을 향상시키기 위하여 채널을 추정하기 위한 여러 방법들이 연구되었다. 본 논문에서는 기존의 sparse-aware LMS(Least Mean Square) 알고리즘들보다 빠른 수렴속도를 갖는 LMS 기반 채널 추정 알고리즘을 제안하였다. 제안한 방법은 $L_p$-norm LMS 알고리즘과 soft decision 과정을 결합한 것이다. 모의실험은 실제 해상 실험을 통하여 얻은 수중 음속 데이터를 바탕으로 수행되었다. 그 결과 제안한 방법이 기존의 방법들보다 빠른 수렴속도와 향상된 성능을 보이는 것을 확인하였다.

• 한국소음진동공학회논문집
• /
• 제22권2호
• /
• pp.115-122
• /
• 2012

Sound packages and damping materials have been widely applied on the floor to decrease the interior noise of a vehicle. Based on the previous researches on the low-noise vehicles, weight optimization through minimization of damping material usage is required while decreasing mid and high frequency range noise by application of sound packages. This paper describes the analysis process of robust design of vehicle body structure before applying damping materials and focuses on the analysis and test process of the location optimization at the stage of damping material application. A vibration experiment for the analysis of floor panel velocity with respect to the excitation of suspension attachment parts at the underfloor of a vehicle is performed. And through the improvement correlation between FEA and TEST, a design guide to optimize damping materials application in the early design stage is proposed. A research on vibration damping steel sheets and liquid acoustic spray on deadener(LASD) is performed to minimize manufacturing time and to minimize the space for pre-existing asphalt damping materials. As results of this study, panel stiffness is achieved through curved surface panel and bead optimization. And test baseline of optimum design is suggested through damping material optimization. And finally, through re-establishing the analysis process for vibration reduction of vehicle floors and lightweight design of damping materials, it is possible to design damping materials efficiently in the preceding stage of design.

• 한국소음진동공학회논문집
• /
• 제14권10호
• /
• pp.1007-1014
• /
• 2004

This paper presents a study of low frequencies volume velocity vibration control of a smart panel in order to reduce sound transmission. A distributed piezoelectric quadratically shaped polyvinylidene fluoride (PVDF) polymer film is used as a uniform force actuator and an array of $4\;{\times}\;4$ accelerometer is used as a volume velocity sensor for the implementation of a single-input single-output control system. The theoretical and experimental study of sensor-.actuator frequency response function shows that this sensor-actuator arrangement provides a required strictly positive real frequency response function below about 900 Hz. Direct velocity feedback could therefore be implemented with a limited gain which gives reductions of about 15 dB in vibration level and about 8 dB in acoustic power level at the (1,1) mode of the smart panel. It has been also shown that the shaping error of PVDF actuator could limit the stability and performance of the control system.