• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.4
• /
• pp.328-336
• /
• 2004

Recently a mobile service is changing into a system environment that offers the customer various contents service. Representative example of service is a Calling Identity Del ivory Service(CID). Such service has the problem in the case which the receiver cannot remember the phone number of the sender; it has a difficult problem that cannot easily confirm whose the phone number it is. Therefore, it is desirable to design and implement visual services that can enhance the recognition of users. In this paper, we propose the architecture that is similar to a Calling Identity Delivery Service. We propose the architecture for communication service and system that is able to visually display the information of the sender using 2D image data in mobile environment. After that we set the image information to represent the user and this method is able to visually display the information of the sender by transmitting an image data through channels from switch station or base station using the server. When the receiver receives a phone call from the sender, this method provides an efficient service by transmitting visual data with bell sound. That is, the image information of sender is appeared on liquid crystal display(LCD) of the receiver at the same time. We investigate the concepts for processing real-time transmission of image data and describe an example of the implementation result that is based on system. This technology has a potential influence on the marketing and presents an efficiency of this method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.472-482
• /
• 2019

This paper describes the stabilization of underwater TAS winch system Deploy/Recover operation performance. TAS winch installed on the stern of submarine performs to deploy/recover sensor, towing cable and rope tail which is deployed from the stern and separated from submarine itself. Also TAS winch provides transmission path of power to the sensor and data transmitting/receiving path which data are acquired from underwater environment like sound, depth and temperature. At the step of TAS winch evaluation test, sporadic standstill and rotating speed oscillation phenomenon were occurred. Winch motor provides the available torque to deploy/recover TAS and root cause analysis to the winch motor was done to find exact reason to sporadic malfunction. When winch motor was disassembled, eccentricity of rotor, slip-ring and the other composition part for winch motor were found. These might cause magnetic field distortion. To make TAS winch system more stable and block magnetic field distortion, this paper suggests methods to enhance fixing status installed in winch motor. For reliable data acquisition for TAS winch operation, the deploy/recover function of the improved type of TAS winch was verified in LBTS making similar condition with sea status. At the end of stage, improved type of TAS winch was tested on some functions not only deploy/recover function, but sustainability of TAS operation on specific velocity, steering angle of submarine in the sea trial. Improved type of TAS winch was verified in accordance with design requirement. Also, validity of suggested methods were verified by the sea trial.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.570-575
• /
• 2019

Active muffler is implemented by applying active noise control technique to reduce exhaust noise of automobile muffler. Conventional Filtered_x LMS algorithm has a problem that the degree of control filter becomes very large and convergence deteriorates when acoustic feedback is present. The recursive LMS algorithm can compensate for this problem because it can be easily diverted in the adaptive filter adaptation process. In this paper, the structure of the primary path and the secondary path transfer function is designed as the IIR filter to improve the convergence performance and the computational burden, and the stabilization filter algorithm is applied to secure stability which is a disadvantage of the IIR filter structure. The stabilization filter algorithm plays a role of pulling the pole into the unit circle to prevent the pole of the transfer function corresponding to the acoustic feedback from diverging during the adaptation process. In this way, the computational burden of the active muffler system and the convergence performance can be improved. In order to show the usefulness of the proposed system, we compared the performance of the proposed Filtered_x LMS algorithm with the performance of the proposed system for the exhaust sound of a diesel engine, which is a variable environment. Compared to conventional algorithm, proposed algorithm's computational burden is less than half, and convergence performances are more than 4 times.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.15 no.3
• /
• pp.243-250
• /
• 2009

The expression of signal to noise ratio (SNR) is derived for the individual echo sounder and for the general specifications of commercial echo sounder. The SNR is depicted by several factors on transmitting and receiving, sound propagation, scattering by fishes, and mainly self ship noise. The detection ranges of echo sounders in depth and breadth are derived by finding the border of an acceptable SNR. The detection ranges are computed for the echo sounders of individual and general specifications. Generally, the detection range is lager for low frequencies. Increasing an electrical power and a diameter of transducer is not as effective for high frequencies as for low frequencies to increase the detection range. The theoretical results of the detection range can be applied to design low electrical power echo sounder for coastal use, to select an appropriate echo sounder, to know the capability of a sounder, and to interpret echograms. A method for evaluating and designing low electrical power echo sounder is developed. A universal diagram for the basic design of the low electrical power echo sounder where SNR is plotted against frequency is developed. An appropriate frequency, transducer diameter, and beam width are easily determined by using the diagram.

• Archives of design research
• /
• v.17 no.2
• /
• pp.15-22
• /
• 2004

Recent complex visual culture is the visual world widely magnified according to the images like image, graphics, photograph, movie, and television, etc. by the development of digital technology. Because it conveys meanings and contents inserting sound and letters, it may have multimedia character conveying and communicating information beyond general language and letters. The vision for various images at that time is inseparably connected with language. And imaginative order of image and vision are composed of special way in culture and history. Language is different in society, culture, and history. Accordingly, if visual experience is communicated with language partially, it is difficult to have university. So, role of linguistic order plays an important role in forming and defining the social and cultural differences among the visual systems. Historically various visual and optical devices with this visual language have influenced a lot. These visual technologies are concrete and physical practice determining a way to get together with the subject and the visible object in the visible world. The visual language is connected with dimension like these symbols of images and the dimension like visual technologies to series of historical physical and institutional practices. It determines social visual mode toward object world in one of visual system. Accordingly, this study is to understand visual language with social and historical character according to the changed concept and characters as development of media technology. And it is to explain it in view of visual language as a dimension of symbol and visual technology of institutional and physical practice. After all, it cannot explain the effect on the function and visual mode of visual technology as its technical element only. It also cannot separate with the practice with coherent discourse and the physical and institutional practice. The possibility, technical element of technology contains, does not realize as it is but the effect is always communicated in the social veins and realized with a restriction.

• Tunnel and Underground Space
• /
• v.11 no.4
• /
• pp.319-327
• /
• 2001

Introduction of new design tools has been required to optimally design and operate the ventilation system of long vehicle tunnels.. The demand has led to wide spread use of the simulation technique throughout the would to analysis the dynamic relationship among the variables associated with vehicle tunnel ventilation. This paper aims at performing on-site study at local tunnels to test the applicability of NETVEN, a simulation model vehicle tunnel ventilation. The study was carried out at four urban as well as highway tunnels model of vehicle tunnel ventilation. The study was carried out at four urban as well as highway tunnels employing different ventilation systems as well as traffic methods. There were some discrepancies sound between the simulation output and measurements and the following four factors are considered to mainly cause those disagreement. (1) The real situation shows distinctive transient and retarding characteristics with respect to air flow and contaminant dispersion, while ventilation forces are not steady-state and in particular those traffic and climatic variables show significant instantaneous variation. (3) Near the exit portal, the CO levels show bigger differences. The general trend is that data with higher CO concentrations carry bigger discrepancies. Turbulent diffusion is though to be the main reason for it and also contribute to the fact hat the highest CO concentrations are found at the locations somewhat inward, not at the exit portals. (4) Higher traffic rate results in higher discrepancies of ventilation velocity. Along with the exhaust characteristics, the vehicle aerodynamic characteristics need to be studied continuously in order to reduce the velocity disagreement.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.9 no.2
• /
• pp.59-71
• /
• 2006

Due to the rapid process of industrialization the cities of Korea confront changes of climate, destructions of the habitate and decrease of the green. Recently Seoul and other local governments have implemented policies and projects to improve the environmental surroundings. In reality, however, those policies and projects face difficulties in the course of implementation. The fact that there are no concrete regulations and specific legal procedures turns out to be one of the main difficulties. The aim of this study is to present specific plans and methods of wall-planting and to provide basic guidelines for the future direction of wall-planting and offer ideas of facilitating wall-planting. This study is based on questionnaires from specialists of landscape architecture through individual interviews and/or e-mails. The questionnaire is consisted of following 4 sections. 1. Show the experts current regulations and/or legal procedures and ask them improvements and suggestions. 2. Ask them choose matters of the highest priority by using Ricardo's diagram method. 3. Ask them to make a graded list in terms of the location and method of wall-planting. 4. Study the maketability of the wall-planting products currently in circulation. The city of Seoul and the Ministry of Environment recommend that trellis and/or planting inducement structures be installed on the building wall by regulation. The specialists responded to the questionnaire advocate that green wall without trellis should be allowed as green zone. Therefore regulations concerning the wall-planting should be determined specifically according to the characteristics of individual plants and walls. It has been urged that legal aid and social support must be reinforced to establish rules dealing with wall-planting. The respondents also point out that significant cutting down of the tax is far more effective in accelerating the wall-green instead of administrative support. The highest priority in terms of planting has been given to sound-proof wall, retaining wall and building wall. Concerning the maketability of the wall-planting products, panel products are recommended for early-planting and building planting. It has been suggested that the research and study of new materials and species be done in advance.

• The Journal of the Korea Contents Association
• /
• v.21 no.12
• /
• pp.676-687
• /
• 2021

The main purpose of this study is to study the effect of a program to improve self-esteem and positive thinking in middle-aged women using Buddha Ball meditation. In order to achieve this research purpose, the subject of this study was middle-aged female Buddhists at Temple H in Busan who were interested in 'Buddha Ball'. For the analysis method, empirical analysis was performed using the One Group Pretest-Posttest Design of this study. The main research results are as follows. First, as a result of examining the effect of Buddha Ball meditation on the quality of life, it could be seen that the overall quality of life had a significant positive (+) effect on the experimental group. Second, as a result of examining the effect of Buddha Ball meditation on self-esteem, it could be seen that self-esteem had a significant positive (+) effect on the experimental group. Third, as a result of examining the effect of Buddha Ball meditation on positive thinking, it could be seen that the entire positive thinking had a significant positive (+) effect on the experimental group. Based on these research results, the main conclusion was that the Buddha Ball, a healing meditation tool using the sound wave energy, had a positive effect on the self-esteem and quality of life of middle-aged women Buddhists. Accordingly, it is judged that the Buddha Ball meditation program has a positive use value for middle-aged women who are experiencing more complex psychological difficulties due to individual, family, and social environmental conditions. In addition, by preparing a system that can actively utilize the Buddha Ball meditation program educationally and politically, the implications of the justification and necessity of using it to improve the self-esteem, positive thinking and quality of life of middle-aged women were presented.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.2 s.314
• /
• pp.37-46
• /
• 2007

In this paper, we propose technologies for enhancing the immersive realization of virtual objects in AR-based product design. Generally, multimodal senses such as visual/auditory/tactile feedback are well known as a method for enhancing the immersion in case of interaction with virtual objects. By adapting tangible objects we can provide touch sensation to users. A 3D model of the same scale overlays the whole area of the tangible object so the marker area is invisible. This contributes to enhancing immersion. Also, the hand occlusion problem when the virtual objects overlay the user's hands is partially solved, providing more immersive and natural images to users. Finally, multimodal feedback also creates better immersion. In our work, both vibrotactile feedback through page motors, pneumatic tactile feedback, and sound feedback are considered. In our scenario, a game-phone model is selected, by way of proposed augmented vibrotactile feedback, hands occlusion-reduced visual effects and sound feedback are provided to users. These proposed methodologies will contribute to a better immersive realization of the conventional AR system.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.30 no.3
• /
• pp.42-56
• /
• 2012

This study was carried out to investigate the construction characteristics and the landscaping design skill for Wiyiam at Ongnyucheon(玉流川) in the rear garden of Changdeok Palace focusing on constructing technique, space composition and transformational process of the site. The results of this study were summarized as follows; First, Wiyiam of Ongnyucheon was constructed as garden ornament which was modified the huge bedrock into the shape of the mountain. The waterfall of Wiyiam was originally made of torrent which water flowed into the bottom, but it was reconstructed to take the effect of Inak(離落: the method to drop water from high place) by carving rock into square shape at the era of King Gojong(高宗). Second, main characteristics of Wiyiam appeared in Donggwoldo was the hill built up with a square pond and ground at the back of Wiyiam and the profound scenery of mountains and stream from the view of Wiyiam. Also, pavilions such as Soyojeong(逍遙亭), Cheongujeong and Taegeukjeong(太極亭) built in Ongnyucheon seemed to be constructed as the spots to appreciate the view and waterfall sound of Wiyiam. Also the spots were not bounded by the function of creating special water systems such as Cheongujeong pond and Taegeukjeong pond and showed the outstanding landscape design skill to make people feel unusual interest from each spot. On the other hand, this study considered that the evening scenery of Wiyiam, beautiful sound of falling water, unusual water system with beautiful plant materials were landscaped for the function of the psychological peace and stability to the appreciators. Lastly, the extreme change of space composition in Ongnyucheon was assumed as a strategy to improve the existing poor drain environment by confirming that the mountain stream and wall of Soyojeong were removed and drainage in both side of Soyojeong was installed in the 21th year of King Gojong's reign(1884).