• The Journal of Korean Society for Radiation Therapy
• /
• v.12 no.1
• /
• pp.69-84
• /
• 2000

It has been reported that the cancer patient's quality of life is influenced by the perceived health state, self-esteem, health locus of control, social support, whether there is a pain or not, the stage of a disease, the period of a disease, etc, and however, there has been scarcely the research into the fact at home whose cultural and social backgrounds are entire1y different from those of American and European Countries. Accordingly, the author of this thesis performed this study. considering that it is necessary to know the relations between the health locus of control which make it possible to predict the object's behavior related to health and to make plans to induce the object or patient into sound behavior and the quality of life which is closely related to the cancer patient's health, emotion, society, economy, etc. on the whole. This study, a cross-sectional one, includes 135 subjects of $in{\cdot}out$ patients registered at Y University Hospital whose age are more than 20 years, From these patients, data were collected for two weeks through the questionnaire which content concerns about the quality of life and the health locus of control. All the collected data were processed and analyzed through Student's t-test, ANOVA, and the calculation of Pearson Correlation Coefficient, using the SAS program 1. It appeared that the disposition of health locus of control was mostly inclined to the disposition of powerful other health locus of control($28.37{\pm}4.24$), then inclined to internal health locus of control($27.03{\pm}4.17$), and next to chance health locus of control($19.71{\pm}4.97$) By the way. the disposition of powerful other health locus of control appeared a tittle bit higher than internal health locus of control 2. The degree of the quality of life appeared to be 137.54 points in the average of total points and 3.11 in the average evaluation mark. It appeared that the quality of life was most significantly influenced by a factor of 'relations with neighbors' and least significantly influenced by factors of physical conditions and functions. 3. It appeared that the relation between the disposition of health locus of control and the quality of life has nothing to do with the relation between internal health locus of control and the quality of life(r=.1446, P>.05) and also with the relation between the disposition of powerful other health locus of control(r=.0385, P>.05). In conclusion, in the study it has been found out that there is no correlation between the health locus of control and the quality of life, and however it is sound to induce the cancer patient to internal health locus of control. Therefore, it is necessary that under the special circumstances, the cancer patient's behavior should be predicted, thereby inducing the patient to the sound change of his or her behavior. Also in order that the patient enjoys his or her life satisfactorily while living, It is deemed that some kind of multilateral meditation in health and treatment is necessary so that the patient can feel the relief of pain, better health, etc.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.4
• /
• pp.325-336
• /
• 2000

During the last decade, an increasing interest in Underfloor Air-Conditioning(UFAC) systems has emerged. The purpose of this paper is to evaluate comprehensively the indoor environmental performance of office buildings with UFAC system in order to develope the design prototype of this system. In this paper, the physical measurements and the interviewing survey of occupant's sensation responses to the environment were carried out. Measurements and survey were made of the thermal environmental factors such as air temperature, relative humidity, air velocity, globe temperature, and the other several environmental factors such as the sound level and the illuminance of working plane, etc. And, the air quality was evaluated by measuring the concentration of suspended particles, carbon monoxide, and carbon dioxide in the room. Furthermore, the paper appraises the various indoor environmental factors of the room by using post-occupancy evaluation(POE) method in office building with UFAC system, and thus, it suggests the basic data for assessing the indoor comfort based on field measurements and survey.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.6
• /
• pp.69-75
• /
• 2019

In recent years, the driving performance and exhaust sound quality in automobiles have been recognized as important factors, as they maximize the driving fun to fulfil the demands of customers. Therefore, many automobile manufacturers are studying various exhaust pipe shapes to improve sound quality and optimize exhaust pressure. The objective of the exhaust pipe design is to maximize the engine efficiency using optimal exhaust pressure settings. In this study, an exhaust system was fabricated with different junction shapes, and the results were analyzed through various experiments. The exhaust gas pressure acting inside the exhaust pipe was measured using a pressure transducer. Meanwhile, the vibration generated in the vehicle was measured in three axial directions and analyzed. The ground noise generated in the indoor and outdoor of the vehicle was measured, and the noise generated at the maximum output was measured and analyzed.

• Korean Journal of Materials Research
• /
• v.20 no.12
• /
• pp.640-644
• /
• 2010

Information technology devices, such as cellular phones, MP3s and so on, due to restrictions of space, require thin and small micro-speakers to generate sound. The reduction of the size of micro-speakers has resulted in the decrease of sound quality, due to such factors as frequency range and sound pressure level. In this study, the acoustical properties of oval microspeakers has been studied as a function of pattern shape on the diaphragm. The other conditions of micro-speakers, except for the pattern, was not changed. When the pattern is present on the diaphragm and the shape of pattern was a whirlwind, the resonance frequency was reduced due to the decrease of tensile strength of diaphragm. The patterns presented in the semi-minor axis of diaphragm did not effect a change of resonance frequency. However, increasing the number of patterns in the semimajor axis of diaphragm became a reason for the decrease of resonance frequency on edge side. When the depth of pattern on edge side was increased, the resonance frequency was decreased due to reduction of geometrical stiffness. If the height of edge and dome were increased, the resonance frequency and geometrical stiffness rapidly increased. After reaching the maximum values, they began to decrease with the continuous increase of height.

• Journal of Biosystems Engineering
• /
• v.27 no.1
• /
• pp.59-66
• /
• 2002

The objectives of the study were to analyze the acoustic characteristics related to the internal quality factors of watermelon(Citrulus Vulgaris Schrad). Among the various internal quality factors, only four factors such as ripeness, inside cavity, yellow belt and blood flesh were considered in this study. Relationships between the internal quality factors, the day after fruit set and the day after harvest were also investigated. Test apparatus was the same as the apparatus described in the previous study(Choi et at., 2000). The selected sample was divided into four groups; 69 samples used for ripeness tests 56 samples for ripeness test along the day after fruit set and for yellow belt detection, 60 samples for ripeness along the day after harvest 44 samples fur blood flesh detection. It was shown that the first peak frequencies shifted to the lower range and the energy ratios of the bandwidths between 0∼550 Hz to the bandwidths between 850∼2500 Hz increased as the day after fruit set elapsed. Since the acoustic responses of the watermelon such as frequency and magnitude began to change from 10 days after harvest, the storage period of watermelon in a normal temperature condition seemed to be approximately 10 days after harvest. The ratios of the first peak amplitude to the maximum peak amplitude fur the sound watermelon showed the higher value than that fur watermelon with cavity inside, and the separation between the sound and cavity inside could be accomplished by the ratio value of 0.25. The energy ratios (0∼550 Hz/850∼2,500 Hz) for the watermelon with cavity inside showed the higher value than 2.3. The frequency characteristics of the yellow belt watermelon appeared mostly in the range of 600∼900 Hz frequencies. The yellow belt watermelon showing the energy spectral density function at this frequency range to be over 70 seemed to be not a marketable commodity, The energy ratios(0∼550 Hz/850∼2,500 Hz) for the blood flesh watermelon showed the higher value than 3.5.

• Information Systems Review
• /
• v.22 no.2
• /
• pp.167-199
• /
• 2020

The ICT-based curation as a series of experiences with the mobile exhibition-guide applications or guide programs in art galleries helps visitors fully immersed in the exhibition and allows them to have more informative and convenient guide experience at art galleries. This study aims to verify how the factors of ICT-based curation affects the commitment and satisfaction of visitors at art galleries, figure out whether the visitors' commitment has effects on their satisfaction, and then finally test the impact of their commitment and satisfaction on their revisit intention. In order to validate the cause-and-effect relationships between these factors, the ICT-based curation in this paper is categorized into five factors - gamification, quality of image/video information, quality of sound/text information, contextual offer, and instant connectivity. The main results of the study are as follows. First, only the gamification has significantly positive effects on the commitment of art gallery visitors, while other two factors - the instant connectivity, and the quality of sound/text information - have significantly positive effects on the satisfaction of visitors. Second, the commitment of visitors also has significantly positive effects on their satisfaction. Third, the commitment of the visitors don't have significantly positive relationship with their intention of revisit, but the satisfaction of the visitors have significantly positive relationship with their intention of revisit.

• Journal of Information Technology Services
• /
• v.7 no.4
• /
• pp.179-198
• /
• 2008

It is widely known that usability is a critical quality attribute of IT systems. Many studies have developed various methods for finding out usability problems. Usability professionals have emphasized that usability should be integrated into the development life cycle in order to maximize the usability of systems with minimal cost. To achieve this, it is essential to classify usability problems systematically and connect them into the activities of designing user interfaces and tasks. However, there is a lack of framework or method for these two problems and thus remains a challengeable research issue. As a beginning study, this paper proposes a conceptual framework for addressing the two issues. We firstly summarize usability-related studies so far, including usability factors and evaluation methods. Secondly, we review seven approaches to identifying and classifying usability problems. Based on this review and opinions of usability engineers in real industry as well as the review results, this paper proposes a framework comprising three viewpoints, from which more sound classification scheme of usability problems can be inductively developed.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.5
• /
• pp.314-321
• /
• 2010

This study examines the influence of functional interior factors on the variation of indoor environment to propose proper elements for planning studyrooms. Several factors that should be included in planning stages of the rooms are discussed to apply appropriate conditions for a pilot study. Field measurements and survey were performed in actual apartment buildings. The influence of lighting, thermal and acoustical conditions on comfort levels were examined.

• Journal of Broadcast Engineering
• /
• v.23 no.3
• /
• pp.421-430
• /
• 2018

Many voice recognition systems use methods such as MFCC, HMM to acknowledge human voice. This recognition method is designed to analyze only a targeted sound which normally appears between a human and a device one. However, the recognition capability is limited when there is a group sound formed with diversity in wider frequency range such as dog barking and indoor sounds. The frequency of overlapped sound resides in a wide range, up to 20KHz, which is higher than a voice. This paper proposes the new recognition method which provides wider frequency range by conjugating the Wideband Sound Spectrogram and the Keras Sequential Model based on DNN. The wideband sound spectrogram is adopted to analyze and verify diverse sounds from wide frequency range as it is designed to extract features and also classify as explained. The KSM is employed for the pattern recognition using extracted features from the WSS to improve sound recognition quality. The experiment verified that the proposed WSS and KSM excellently classified the targeted sound among noisy environment; overlapped sounds such as dog barking and indoor sounds. Furthermore, the paper shows a stage by stage analyzation and comparison of the factors' influences on the recognition and its characteristics according to various levels of noise.

• Journal of Welding and Joining
• /
• v.16 no.5
• /
• pp.76-85
• /
• 1998

The resistance spot welding process has been used for joining the sheet metal in automotive engineering. In the resistance spot welding, the weld quality is very important, because the quality of weld is one of the most important factors to the automobile quality. The size of he molten nugget has been utilized to estimate the weld quality. However, it is not easy to find the weld defects. For weldability estimation, we have to use the nondestructive method such as X-ray or ultrasonic inspection. But these kinds of approaches are not suitable for detecting the defects in real time. The purpose of this study is to develop the real time monitoring of the weld quality in the resistance spot welding. Obtained data were used to estimate weldability using fuzzy algorithm. It is sound that this monitoring and estimation system can be useful to improve the weld quality in the resistance spot welding process and it is possible to estimate the weldability in real time.