• 대한방사선치료학회지
• /
• 제12권1호
• /
• pp.69-84
• /
• 2000

It has been reported that the cancer patient's quality of life is influenced by the perceived health state, self-esteem, health locus of control, social support, whether there is a pain or not, the stage of a disease, the period of a disease, etc, and however, there has been scarcely the research into the fact at home whose cultural and social backgrounds are entire1y different from those of American and European Countries. Accordingly, the author of this thesis performed this study. considering that it is necessary to know the relations between the health locus of control which make it possible to predict the object's behavior related to health and to make plans to induce the object or patient into sound behavior and the quality of life which is closely related to the cancer patient's health, emotion, society, economy, etc. on the whole. This study, a cross-sectional one, includes 135 subjects of $in{\cdot}out$ patients registered at Y University Hospital whose age are more than 20 years, From these patients, data were collected for two weeks through the questionnaire which content concerns about the quality of life and the health locus of control. All the collected data were processed and analyzed through Student's t-test, ANOVA, and the calculation of Pearson Correlation Coefficient, using the SAS program 1. It appeared that the disposition of health locus of control was mostly inclined to the disposition of powerful other health locus of control($28.37{\pm}4.24$), then inclined to internal health locus of control($27.03{\pm}4.17$), and next to chance health locus of control($19.71{\pm}4.97$) By the way. the disposition of powerful other health locus of control appeared a tittle bit higher than internal health locus of control 2. The degree of the quality of life appeared to be 137.54 points in the average of total points and 3.11 in the average evaluation mark. It appeared that the quality of life was most significantly influenced by a factor of 'relations with neighbors' and least significantly influenced by factors of physical conditions and functions. 3. It appeared that the relation between the disposition of health locus of control and the quality of life has nothing to do with the relation between internal health locus of control and the quality of life(r=.1446, P>.05) and also with the relation between the disposition of powerful other health locus of control(r=.0385, P>.05). In conclusion, in the study it has been found out that there is no correlation between the health locus of control and the quality of life, and however it is sound to induce the cancer patient to internal health locus of control. Therefore, it is necessary that under the special circumstances, the cancer patient's behavior should be predicted, thereby inducing the patient to the sound change of his or her behavior. Also in order that the patient enjoys his or her life satisfactorily while living, It is deemed that some kind of multilateral meditation in health and treatment is necessary so that the patient can feel the relief of pain, better health, etc.

• 설비공학논문집
• /
• 제12권4호
• /
• pp.325-336
• /
• 2000

During the last decade, an increasing interest in Underfloor Air-Conditioning(UFAC) systems has emerged. The purpose of this paper is to evaluate comprehensively the indoor environmental performance of office buildings with UFAC system in order to develope the design prototype of this system. In this paper, the physical measurements and the interviewing survey of occupant's sensation responses to the environment were carried out. Measurements and survey were made of the thermal environmental factors such as air temperature, relative humidity, air velocity, globe temperature, and the other several environmental factors such as the sound level and the illuminance of working plane, etc. And, the air quality was evaluated by measuring the concentration of suspended particles, carbon monoxide, and carbon dioxide in the room. Furthermore, the paper appraises the various indoor environmental factors of the room by using post-occupancy evaluation(POE) method in office building with UFAC system, and thus, it suggests the basic data for assessing the indoor comfort based on field measurements and survey.

• 한국기계가공학회지
• /
• 제18권6호
• /
• pp.69-75
• /
• 2019

In recent years, the driving performance and exhaust sound quality in automobiles have been recognized as important factors, as they maximize the driving fun to fulfil the demands of customers. Therefore, many automobile manufacturers are studying various exhaust pipe shapes to improve sound quality and optimize exhaust pressure. The objective of the exhaust pipe design is to maximize the engine efficiency using optimal exhaust pressure settings. In this study, an exhaust system was fabricated with different junction shapes, and the results were analyzed through various experiments. The exhaust gas pressure acting inside the exhaust pipe was measured using a pressure transducer. Meanwhile, the vibration generated in the vehicle was measured in three axial directions and analyzed. The ground noise generated in the indoor and outdoor of the vehicle was measured, and the noise generated at the maximum output was measured and analyzed.

• 한국재료학회지
• /
• 제20권12호
• /
• pp.640-644
• /
• 2010

Information technology devices, such as cellular phones, MP3s and so on, due to restrictions of space, require thin and small micro-speakers to generate sound. The reduction of the size of micro-speakers has resulted in the decrease of sound quality, due to such factors as frequency range and sound pressure level. In this study, the acoustical properties of oval microspeakers has been studied as a function of pattern shape on the diaphragm. The other conditions of micro-speakers, except for the pattern, was not changed. When the pattern is present on the diaphragm and the shape of pattern was a whirlwind, the resonance frequency was reduced due to the decrease of tensile strength of diaphragm. The patterns presented in the semi-minor axis of diaphragm did not effect a change of resonance frequency. However, increasing the number of patterns in the semimajor axis of diaphragm became a reason for the decrease of resonance frequency on edge side. When the depth of pattern on edge side was increased, the resonance frequency was decreased due to reduction of geometrical stiffness. If the height of edge and dome were increased, the resonance frequency and geometrical stiffness rapidly increased. After reaching the maximum values, they began to decrease with the continuous increase of height.

• Journal of Biosystems Engineering
• /
• 제27권1호
• /
• pp.59-66
• /
• 2002

The objectives of the study were to analyze the acoustic characteristics related to the internal quality factors of watermelon(Citrulus Vulgaris Schrad). Among the various internal quality factors, only four factors such as ripeness, inside cavity, yellow belt and blood flesh were considered in this study. Relationships between the internal quality factors, the day after fruit set and the day after harvest were also investigated. Test apparatus was the same as the apparatus described in the previous study(Choi et at., 2000). The selected sample was divided into four groups; 69 samples used for ripeness tests 56 samples for ripeness test along the day after fruit set and for yellow belt detection, 60 samples for ripeness along the day after harvest 44 samples fur blood flesh detection. It was shown that the first peak frequencies shifted to the lower range and the energy ratios of the bandwidths between 0∼550 Hz to the bandwidths between 850∼2500 Hz increased as the day after fruit set elapsed. Since the acoustic responses of the watermelon such as frequency and magnitude began to change from 10 days after harvest, the storage period of watermelon in a normal temperature condition seemed to be approximately 10 days after harvest. The ratios of the first peak amplitude to the maximum peak amplitude fur the sound watermelon showed the higher value than that fur watermelon with cavity inside, and the separation between the sound and cavity inside could be accomplished by the ratio value of 0.25. The energy ratios (0∼550 Hz/850∼2,500 Hz) for the watermelon with cavity inside showed the higher value than 2.3. The frequency characteristics of the yellow belt watermelon appeared mostly in the range of 600∼900 Hz frequencies. The yellow belt watermelon showing the energy spectral density function at this frequency range to be over 70 seemed to be not a marketable commodity, The energy ratios(0∼550 Hz/850∼2,500 Hz) for the blood flesh watermelon showed the higher value than 3.5.

• 경영정보학연구
• /
• 제22권2호
• /
• pp.167-199
• /
• 2020

본 연구의 목적은 정보통신기술의 발달에 따른 미술관 전시 환경 변화의 한 흐름인 정보통신기술 (ICT) 기반 큐레이션이 미술관 관람객의 몰입과 만족도, 재방문의도에 미치는 영향 관계를 분석하는데 있다. 이를 통해 현재 많은 미술관에서 운영되고 있는 ICT 기반 큐레이션 개발과 서비스 운영관리에 시사점을 제시하고자 한다. 본 연구에서는 위치기반 모바일 큐레이션을 박물관 및 미술관 등에서 제공하는 스마트폰 애플리케이션 또는 스마트 단말기를 이용하여 경험하는, 멀티미디어 전시 해설 서비스로 정의하고, 이에 대한 변수 속성으로서, 재미적 요소인 게이미피케이션(gamification), 이미지/영상 정보품질, 소리/텍스트 정보품질, 상황기반 제공성(contextual offer), 그리고 즉시접속성(instant connectivity) 등 총 5가지 속성을 제시하였다. 이 각각의 속성과 미술관 관람객의 몰입 및 만족도와의 관계, 그리고 재방문의도에 이르기까지의 영향을 밝히고자 설문지기법을 통한 실증 분석을 실시하였다. 본 연구의 주요연구 결과는 다음과 같다. 첫째, 위치기반 모바일 큐레이션 속성들 중에서 게이미피케이션만이 관람객의 몰입에 정(+)의 영향을 미치는 것으로 나타났다. 둘째, 위치기반 모바일 큐레이션 속성들 중에서 관람객의 만족도에 유의적으로 정(+)의 영향을 미치는 것은 즉시접속성과 소리/텍스트 정보품질 요인 등이었다. 셋째, 미술관 관람객의 몰입은 만족도에 정(+)의 관계가 있는 것으로 나타났으며, 마지막으로, 미술관 관람객의 몰입은 재방문의도에 유의적인 영향을 미치지 않았으나, 관람만족도는 재방문의도에 대해 정(+)의 영향을 미치는 것으로 분석되었다.

• 한국IT서비스학회지
• /
• 제7권4호
• /
• pp.179-198
• /
• 2008

It is widely known that usability is a critical quality attribute of IT systems. Many studies have developed various methods for finding out usability problems. Usability professionals have emphasized that usability should be integrated into the development life cycle in order to maximize the usability of systems with minimal cost. To achieve this, it is essential to classify usability problems systematically and connect them into the activities of designing user interfaces and tasks. However, there is a lack of framework or method for these two problems and thus remains a challengeable research issue. As a beginning study, this paper proposes a conceptual framework for addressing the two issues. We firstly summarize usability-related studies so far, including usability factors and evaluation methods. Secondly, we review seven approaches to identifying and classifying usability problems. Based on this review and opinions of usability engineers in real industry as well as the review results, this paper proposes a framework comprising three viewpoints, from which more sound classification scheme of usability problems can be inductively developed.

• 설비공학논문집
• /
• 제22권5호
• /
• pp.314-321
• /
• 2010

This study examines the influence of functional interior factors on the variation of indoor environment to propose proper elements for planning studyrooms. Several factors that should be included in planning stages of the rooms are discussed to apply appropriate conditions for a pilot study. Field measurements and survey were performed in actual apartment buildings. The influence of lighting, thermal and acoustical conditions on comfort levels were examined.

• 방송공학회논문지
• /
• 제23권3호
• /
• pp.421-430
• /
• 2018

많은 음성인식 시스템들은 MFCC와 HMM등의 분류 기법을 사용하여 사람의 음성을 인식한다. 그러나 이러한 음성인식 시스템은 단일 음성신호를 인식하는 것을 목적으로 설계되어, 인간과 기계사이의 일대일 음성 인식에는 적합하나, 애완동물 소리와 실내 소리같은 음성보다 다양하고 넓은 주파수의 소리 군으로 중첩된 음향 속에서 설정된 소리를 인식하기에는 제한이 있다. 중첩된 소리들의 주파수는 사람의 목소리보다 높은 최대 20 kHz까지 넓은 주파수 범위로 구성된다. 본 논문에서는 광역 사운드 스펙트로그램과 DNN에 기반한 케라스 시?셜 모델 기법을 활용하여 인지 주파수 범위를 넓게 확대하는 새로운 인식방법을 제안한다. 광역 사운드 스펙트로그램이 본 논문에서 설계된 특징 추출 및 분류 시스템과 같이 넓은 주파수 범위의 다양한 소리를 분석하고 실험하도록 채택되었다. 소리 인식률을 개선하기 위하여, 케라스 시?셜 모델이 사운드 스펙트로그램에 의하여 생성되어 추출된 특징을 사용하여 패턴인식을 수행하기 위한 방법으로 채용되었다. 제안된 특징 추출 및 분류 시스템이 광역 사운드 스펙트로그램과 케라스 시?셜 모델을 채용하여 애완동물 소리와 실내 소리같은 다양한 주파수들로 구성되어 중첩된 음향 속에서 설정된 소리를 우수하게 분류하는 것을 확인하였다. 그리고 중첩된 소리의 크기에 비례하여 인식에 미치는 특성과 영향을 단계별로 비교 분석하였다.

• Journal of Welding and Joining
• /
• 제16권5호
• /
• pp.76-85
• /
• 1998

The resistance spot welding process has been used for joining the sheet metal in automotive engineering. In the resistance spot welding, the weld quality is very important, because the quality of weld is one of the most important factors to the automobile quality. The size of he molten nugget has been utilized to estimate the weld quality. However, it is not easy to find the weld defects. For weldability estimation, we have to use the nondestructive method such as X-ray or ultrasonic inspection. But these kinds of approaches are not suitable for detecting the defects in real time. The purpose of this study is to develop the real time monitoring of the weld quality in the resistance spot welding. Obtained data were used to estimate weldability using fuzzy algorithm. It is sound that this monitoring and estimation system can be useful to improve the weld quality in the resistance spot welding process and it is possible to estimate the weldability in real time.