• 동력기계공학회지
• /
• 제14권2호
• /
• pp.55-59
• /
• 2010

In the study, it is considered sporty car as 1400cc entry cars using sound generator. These cars are required special sound quality, also sporty sound quality. The operational principle of this sound generator system is that on the operation of the engine intake valves caused pulsating is to shake the membrane of the sound generator on the inside of the driver front dash panel through the intake manifold, which will deliver the required sound quality and tone. For the component constructed sound generator, main design parameters are selected and optimized using the daguchi's method. The results are as follows; The C2 sound level must be minimized and C4 level must be maximized. And also overall level keeps linear characteristics.

• 한국소음진동공학회논문집
• /
• 제20권11호
• /
• pp.1018-1024
• /
• 2010

The printer noise consists of the noise of the various components and parts such as motor, fan and solenoid. And the human's printing sound recognition shows various aspects when the printer starts to print papers because the components operate at the same time. Especially, printers are usually installed in the quiet office room. Therefore the printing noise is related to its competitiveness in the market. The importance of the printer sound qualities is increasing and it is necessary to develop the sound quality evaluation system, so it is a key point to identify the noise source of the printer and develop the sound quality index to each component. By using this evaluation system, it is possible to evaluate the sound quality of a prototype printer compared to the already existing one. In this paper, the printer sound quality evaluation system was developed by the following steps. Firstly, the signal processing method was applied to the recorded printing sound to identity and split the noise of components. Secondly, the MLR(multiple linear regression) method and the psychoacoustics were used to develop the sound quality index. Finally, the improvement of the printer sound quality is possible by using the result of the MLR and the path analysis. The output of this research will be applied to the development of a new printer.

• 한국음향학회지
• /
• 제36권1호
• /
• pp.78-87
• /
• 2017

본 논문에서는 심리음향학적 연구 방법론을 음악의 작품 분석에 적용하여 음악의 매개체인 소리에 내재된 주관성을 객관화하고자 한다. 먼저, 대표적인 표제음악인 베를리오즈의 '환상교향곡'에서 18개의 샘플음원을 추출한 다음 쯔비커의 음질 파라메터(Loudness, Sharpness, Roughness, Fluctuation Strength)를 이용해서 샘플음원의 객관적 음질을 평가하였다. 주관적 음질 평가를 위하여 환상교향곡의 표제성을 기초로 9개의 대표 음질형용사를 추출한 다음 수치등급평가법과 쌍대비교법을 사용하여 1차 청음평가를 수행하였다. 1차 청음평가결과의 요인분석법을 통하여 "밝은", "시끄러운", "현실적인"의 세 가지 음질을 추출하였다. 세 가지 음질 형용사를 사용하여 2차 청음평가를 수행하고 그 결과를 객관적 음질 파라메터와 상관분석을 수행하여 음질지표를 개발하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1297-1301
• /
• 2007

The Conventional noise control attempts to simply reduce the level of product noise. But it is very straight forward way that we have consider human perception on noise. Since human listening is very sensitive to sound. Evaluation of the sound quality of a Vacuum Cleaner is studied base on human sensibility engineering. In this paper, we choose two Vacuum Cleaners that are sold in Korea and reduced noise control. Comparison Method is used to evaluate noise and preference of Vacuum Cleaner by steps. The sound quality of Vacuum Cleaner noise is analyzed by employing the subjective evaluation and by representing them in terms of the objective quantities. Semantic Differential Method is used to study sound quality Evaluation. To analyze the sound quality of Vacuum Cleaner noise, consider the coefficients of correlation between sound metrics and subjective rating. The linear regression models were obtained for the subjective evaluation and sound quality metrics.

• 한국소음진동공학회논문집
• /
• 제20권12호
• /
• pp.1223-1228
• /
• 2010

The conventional noise control attempts to simply reduce the level of product noise. But it is very straight forward way that we have considered human perception on noise. Since human listening is very sensitive to sound. Evaluation of the sound quality of a vacuum cleaner is studied base on human sensibility engineering. In this paper, we choose six vacuum cleaners that are sold in Korea and reduced noise control. The sound quality of vacuum cleaner noise is analyzed by employing the subjective evaluation and by representing them in terms of the objective quantities. Semantic differential method is used to study sound quality Evaluation. To analyze the sound quality of vacuum cleaner noise, consider the coefficients of correlation between sound metrics and subjective rating. The linear regression models were obtained for the subjective evaluation and sound quality metrics.

• 소음진동
• /
• 제9권5호
• /
• pp.991-997
• /
• 1999

It is getting higher the demand on a good sound in a car. Like some other sensory qualities, achieving a good sound is still treated as a black-box followed by the individual taste of tuning engineers. This study aims to define the attributes of a good car audio sound and the assessment factors affecting the sound quality. With a variety of surveys on professional listening groups and car audio installers, 26 most frequently used vocabularies are selected as typical presentations of car audio sound quality. After repetitions of listening tests with deliberately selected test CD, pre-recorded 15 different digital car-recordings, headphones replay system, and three different listening groups, it is proved that there are at least 5 different assessment factors which significantly affect the car audio sound quality. They are high fidelity, spectral balance, tonal accuracy, sound stage and acoustic fault.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.708-712
• /
• 2013

The appearance of the Korean bell is exceptional comparing to that of other bells. The sound of the Korean bell is also distinguishable because of its remarkable appearance. The sound of the Korean bell is composed of striking sound and residue sound. This study focuses mainly on the striking sound of the Korean bell. The primary purpose of this study is to suggest a proper sound quality evaluation method for Korean bell. To implement this study, examine the formerly established methods which are method using rating method and method using generally used Psychoacoustics metrics. Also, subjective Sound Quality evaluation was conducted to compare the results of method using rating method and the method using psychoacoustics metrics.

• 한국소음진동공학회논문집
• /
• 제25권5호
• /
• pp.345-351
• /
• 2015

Sounds of electrically powered vehicle components such as window lift system, roller blind, etc., are required to be more comfortable and not to irritate the people emotionally. In this paper, a study was conducted to identify the significant sound quality metric and compose the luxuriousness sound quality index of electrically powered vehicle roller blind which is part of vehicle sunroof system. Before conducting subjective evaluation, sound characteristics of roller blind was analyzed and set the target operating sound for subjective evaluation. Thus, transfer sound of roller blind which has the characteristics of sound modulation was used for subjective evaluation. Multiple linear regression analysis was carried out by chosen Zwicker's metrics which are pointed by comments of jurors. Loudness and sharpness related metrics are prime metrics in luxuriousness sound quality index we composed. Also, effect of roller blind assay when it is attached to real vehicle was identified to evaluate the validity of index.

• 응용통계연구
• /
• 제20권3호
• /
• pp.475-485
• /
• 2007

본 연구의 목적은 자동차오디오에서 재생된 음향의 음질에 대한 청취자의 주관적인 선호도를 객관화된 설문 등을 통하여 측정하고 그 결과를 통계적으로 분석하여 일반화시키는 것이다. 직교배열법을 사용하여 여덟 가지 음향특성들의 조합으로 이루어진 음향 환경을 객관적으로 재현하였으며, SD 7점 척도를 사용하여 청취자의 주관적 음질 선호도를 객관화시켰다. 재생된 음향의 음질에 대한 여러 청취자들의 선호도를 다변량 분산분석법을 이용하여 분석한 후, 일반적으로 전체 음질의 선호도를 결정짓는 음향특성을 찾아냈으며, 각각의 음질 선호도에 유의한 영향을 미치는 개별 음향 특성을 찾아내었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.461-466
• /
• 2012

Customers want to have more convenient and comfortable vehicle. Motor-on-caliper EPB(Electrical Parking Brake) System is one of the new systems for customer's convenience. It is applied for Midsize vehicle for reducing weight/price compared to cable puller type EPB. In this paper we studied sound quality improvement of motor-on-caliper EPB system. We developed the sound quality index and suggested the interior sound quality target value. To meet the target value cascading target was also suggested. EPB motor vibration level & sound radiation level, vibro-acoustic transfer function level from EPB to interior was defined. To find out effective way of sound quality improvement and find cascading target, TPA(Transfer Path Analysis) was carried out.