• Restorative Dentistry and Endodontics
• /
• 제44권4호
• /
• pp.45.1-45.10
• /
• 2019

Objectives: Self-adhesive resin cements contain functional monomers that enable them to adhere to the tooth structure without a separate adhesive or etchant. One of the most stable functional monomers used for chemical bonding to calcium in hydroxyapatite is 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP). The aim of this study was to evaluate the influence of the10-MDP concentration on the bond strength and physical properties of self-adhesive resin cements. Materials and Methods: We used experimental resin cements containing 3 different concentrations of 10-MDP: 3.3 wt% (RC1), 6.6 wt% (RC2), or 9.9 wt% (RC3). The micro-tensile bond strength of each resin cement to dentin and a hybrid resin block (Estenia C&B, Kuraray Noritake Dental) was measured, and the fractured surface morphology was analyzed. Further, the flexural strength of the resin cements was measured using the three-point bending test. The water sorption and solubility of the cements following 30 days of immersion in water were measured. Results: The bond strength of RC2 was significantly higher than that of RC1. There was no significant difference between the bond strength of RC2 and that of RC3. The water sorption of RC3 was higher than that of any other cement. There were no significant differences in the three-point bending strength or water solubility among all three types of cements. Conclusions: Within the limitations of this study, it is suggested that 6.6 wt% 10-MDP showed superior properties than 3.3 wt% or 9.9 wt% 10-MDP in self-adhesive resin cement.

• 한국수소및신에너지학회논문집
• /
• 제24권5호
• /
• pp.428-436
• /
• 2013

Attrition characteristics of $CO_2$ absorbents for pre-combustion $CO_2$ capture were investigated to check attrition loss of those absorbents and to determine solid circulation direction and the better $CO_2$ absorbent. The cumulative attrition losses of two absorbents increased with increasing time. However, attrition loss under a humidified condition was lower than that under a non-humidified condition case. Between two absorbents, attrition loss of PKM1-SU absorbent was higher than that of P4-600 absorbent. The average particle sizes of the attrited particles were less than $2.5{\mu}m$ for two absorbents under a non-humidified condition case, and therefore, we could conclude that the main mechanism of attrition for two absorbents is not fragmentation but abrasion. Based on the results from the test for the effect of humidity on the attrition loss, we selected solid circulation direction from SEWGS reactor to regeneration reactor because the SEWGS reactor contains more water vapor than regeneration reactor. Attrition loss and make-up rate of two absorbents were compared based on the results from $CO_2$ sorption capacity tests and attrition tests. Required make-up rate of P4-600 absorbent was lower than that of PKM1-SU absorbent. However, more detail investigation on the optimum regeneration temperature, manufacturing cost, solid circulation rate, regeneration rate, and long-term sorption capacity should be considered to select the best $CO_2$ absorbent.

• 산업기술연구
• /
• 제27권A호
• /
• pp.195-202
• /
• 2007

Milled Korean pine (Pinus densiflora) wood was used to evaluate its adsorption capacity of Cu(II) ions from aqueous solution by running a series of batch experiments. Prior to the tests, the milled woods were pretreated with 1N NaOH, 1N $HNO_3$, and distilled water, respectively, to examine the effect of pretreatment. Within the tested pH range between 3 and 6, copper adsorption efficiency of NaOH-treated wood(96~99%) was superior to the $HNO_3$-treated wood(19~31%) and distilled water-treated wood(18~35%). The efficiency of copper removal by wood enhanced with increasing solution pH and reached a maximum copper ion uptake at pH 5~6. Adsorption behavior of copper onto both raw and $HNO_3$-treated woods was mainly attributed to interaction with carboxylic acid group. For NaOH-treated wood, carboxylate ion produced by hydrolysis or saponification was a major functional group responsible for Cu sorption. NaOH treatment of wood changed the ester and carboxylic acid groups into carboxylate group, whereas $HNO_3$ treatment did not affect the production of functional groups which could bind copper. A pseudo second-order kinetic model fitted well for the sorption of copper ion onto NaOH-treated wood. A batch isotherm test using NaOH-treated wood showed that equilibrium sorption data were better represented by the Langmuir model than the Freundlich model.

• Journal of the Korean Wood Science and Technology
• /
• 제13권3호
• /
• pp.49-53
• /
• 1985

The effects of pre-treatments, the hot water extraction of wood meal and the addition of chemical ($CaCl_2$) to wood-cement water system on the properties of wood-cement composite such as modulus of rupture (MOR), modulus of elasticity (MOE), water sorption ratio and swelling ratio of resulting boards were studied in this experiment. The wood meals through 0.83mm(20 mesh) and retained on 0.42mm(35 mesh) screen were prepared from Pinus densiflora S. at Z. and Larix leptolepsis G. For hot water extraction, 500 grams of wood meal for each species were heated to boiling with 1,500ml of distilled water in 2-liter beaker for 6 hours. Every 2 hours, the wood meals were washed with boiling distil1ed water and reheated to boiling again. After 6 hours boiling, the boiled wood particles were collected by pouring this particles on 200 mesh screen. The collected particles then washed twice with hot distilled water and dried for 24 hours in an oven at $109{\pm}20^{\circ}C$. A mixture of 663.4 grams of cement with 331.7 grams of wood meal based on oven-dry weight were dry-mixed in a plastic vessel. The mixture was kneaded with 497.6ml of distilled water in the ratio of 1.5ml of water to a gram of wood meal. To add calcium chloride to the mixture as an accelerator, $CaCl_2$ 4% solution by weight per volume, was added to pine-or larch-cement board in the ratio of 3% to cement weight. To set wood-cement board, this mixture was clamped at 30cm ${\times}$ 30cm, in thickness of 1.5cm for 3 days at room temperature, declamped and then placed at open condition for 17 days. The target density was 1.0. The four specimens sized to 5cm in width and 28cm in length were used for MOR and MOE test for each treatment. After MOR test, the tested specimens were cut to the size of 5cm ${\times}$ 5cm for water sorption and swelling test. The twenty specimens used to measure the water sorption ratio (soaking 24 hours) and ten of these were used for swelling ratio measurement The results obtained were as follows: 1) Larch was not suitable for wood-cement boards because larch-cement board developed no strength, but pine showed 97.9kg/$cm^2$ by hot water extraction. 2) To increase MOR, hot water extraction was more effective than the addition of $CaCl_2$ in pine and larch because the $CaCl_2$ addition was seemed to speed up the ratio of cement hydration without reacting with the wood substances. 3) The water sorption ratio was lowered by the addition of $CaCl_2$ to wood-cement system because the chemical additive accelerated the rate of cement hydration. 4) In pine-cement board, the swelling ratio from 0.37 to 0.42 percent was observed in length and the swelling ratio from 0.88 to 2.0 percent in thickness. As a rule, the swelling ratio of wood-cement board was very low and the swelling ratio in thickness was higher than in length.

• Carbon letters
• /
• 제22권
• /
• pp.14-24
• /
• 2017

Carboxylated multi-wall carbon nanotubes (MWCNTs-COOH) have been used as efficient adsorbents for the removal of picric acid from aqueous solutions under stirring and ultrasound conditions. Batch experiments were conducted to study the influence of the different parameters such as pH, amount of adsorbents, contact time and concentration of picric acid on the adsorption process. The kinetic data were fitted with pseudo-first order, pseudo-second-order, Elovich and intra-particle diffusion models. The kinetic studies were well described by the pseudo-second-order kinetic model for both methods. In addition, the adsorption isotherms of picric acid from aqueous solutions on the MWCNTs were investigated using six two-parameter models (Langmuir, Freundlich, Tempkin, Halsey, Harkins-Jura, Fowler-Guggenheim), four three-parameter models (Redlich-Peterson, Khan, Radke-Prausnitz, and Toth), two four-parameter equations (Fritz-Schlunder and Baudu) and one five-parameter equation (Fritz-Schlunder). Three error analysis methods, correlation coefficient, chi-square test and average relative errors, were applied to determine the best fit isotherm. The error analysis showed that the models with more than two parameters better described the picric acid sorption data compared to the two-parameter models. In particular, the Baudu equation provided the best model for the picric acid sorption data for both methods.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
• /
• pp.143-146
• /
• 2004

Natural zeolites have exhibited high sorption capacity for inorganic cations including heavy metals and ammonium. Moreover, they were proven to be effective for environmental applications such as permeable barriers for controlling the spread of cation-contaminated groundwater. However zeolites have little or no affinity for anionic species like chromium, as they possess a net negative structural charge. To achieve the simultaneous sorption for anionic contaminants, surfactant-modified zeolite (SMZ) has been employed as the possible sorbents. Current study focuses on simultaneous removal of heavy metals having different ionic form in aqueous solution, cadmium (C $d^{2+}$) and chromium (Cr $O_{4}$$^{2-}$), using newly developed materials, ZanF. ZanF, a potential alternative to SMZ, was derived from zeolite modified by Fe(II) chloride followed by reduction with sodium borohydride. Batch experiments were performed to estimate the removal efficiency of ZanF at different conditions. Under different pH ranging from 2 to 6, removal efficiency was investigated. And C $d^{2+}$ removal efficiency was estimated by varying background concentration of Cr $O_{4}$$^{2-}$, and vice versa. With the test results, ZanF was expected to be a possible reactive materials alternative to SMZ in permeable reactive barriers (PRBs) for treating the contaminated groundwater with cationic and anionic heavy metals.als.

• 한국콘텐츠학회논문지
• /
• 제17권7호
• /
• pp.538-545
• /
• 2017

콘크리트가 화재에 노출되면 콘크리트 표면에서의 수분뿐만 아니라 콘크리트 내부에서의 수분도 수분의 평형 및 전달조건에 의하여 증발이 발생된다. 수분의 평형조건은 재료의 자기이력거동으로 표현되는 물의 증발에 대한 수착등온선 관계로 설명된다. 본 논문은 화재시 콘크리트 내부의 수분변화를 예측하고자 하는 것으로 부재 내부의 임의의 위치에서의 상대함수율을 산정하기 위하여 유한요소방식을 적용하였다. 또한 고온에서 콘크리트의 수분확산 특성치에 대해서도 모델식을 제시하였다. 이러한 해석기법의 정확성을 검증하기 위하여 실험데이터와 비교하였으며, 그 결과 수분증발로 인하여 수분이 감소되는 효과를 포함한 전반적인 부재 내부의 수분이동현상이 실제 실험데이터와 거의 유사하게 나타나는 것으로 확인되었다.

• 한국대기환경학회지
• /
• 제26권1호
• /
• pp.77-84
• /
• 2010

The diffusion and partition coefficients of polyurethane foam (PUF) are estimated using a microbalance experiment and small chamber test. The microbalance is used to measure sorption/desorption kinetics and equilibrium data. When the diffusion condition is controlled in the chamber of the sample, interactions between volatile organic compounds (VOCs) and PUF can lead to the estimation of a relatively homogenous rate of mass transfer in the interiors and surfaces of PUF. The estimates of the material/air partition coefficient (K) and the material-phase diffusion coefficient (D) are shown to be independent of the concentrations of VOCs. This approach, if applied to a diffusion-controlled or physically-based model, can facilitate more precise prediction of their source/sink behavior. Although further research and more rigorous validation is needed, an emission model applied with the diffusion and partition coefficients from this research holds promise for the improvement of reliability in predicting the behavior of VOCs emitted from porous building materials by D and K.

• 한국농공학회논문집
• /
• 제55권3호
• /
• pp.35-40
• /
• 2013

The present study was conducted to investigate the adsorption potential of red mud for fluoride removal. Different operation parameters such as the effect of contact time, initial concentration, pH, competing anions, seawater, adsorbent dose amount, and adsorbent mixture were studied. Nearly 3 hr was required to reach sorption equilibrium. Equilibrium sorption data were described well by Langmuir model and the maximum adsorption capacity of red mud was 5.28 mg/g. The fluoride adsorption at pH 3 was higher than in the pH range 5-9. The presence of anions such as sulfate, nitrate, phosphate, and bicarbonate had no significant effect on fluoride adsorption onto red mud. The fluoride removal by red mud was greater in seawater than deionized water, resulting from the presence of calcium and magnesium ion in seawater. The use of red mud alone was more effective for the removal of fluoride than mixing red mud with other industrial waste such as oyster shells, lime stone, and steel slag. This study showed that red mud has a potential application in the remediation of fluoride contaminated soil and groundwater.

• 대한환경공학회지
• /
• 제29권8호
• /
• pp.930-937
• /
• 2007

본 연구에서는 소나무 종류인 Pinus densiflora로부터 채취한 수피를 이용하여 수용액으로부터 구리 제거를 위한 회분식 흡착 실험을 수행하였다. 구리 흡착에 수피의 화학적 처리가 미치는 효과를 알아보기 위해 1 N 수산화나트륨(NaOH)과 1 N 염산(HCl)을 이용하여 전처리하였다. 구리 농도가 100 mg/L이고 pH가 $3\sim6$인 수용액에서 수산화나트륨(NaOH)을 이용한 수피의 화학적 전처리는 구리의 흡착량을 $139\sim184%$ 정도 증가시키는 효과를 나타냈으나, 염산(HCl)을 이용한 수피의 전처리는 구리의 흡착량을 $37\sim42%$ 정도 감소시키는 효과를 나타냈다. 대체적으로 수피에 의한 구리 흡착은 pH $5\sim6$에서 최대 흡착량을 나타내기는 하였으나, 주어진 pH 범위내에서 수용액의 pH가 구리 흡착에 미치는 효과는 크지 않았다. 수피의 구리 흡착은 유사 2차 동역학 모델로 설명이 가능하였으며, 수산화나트륨(NaOH)으로 전처리한 수피의 경우 초기 농도가 100 mg/L에서 2배로 증가함에 따라 유사 2차 동역학 모델식으로부터 계산된 흡착량$(q_e)$은 6.58 mg/g에서 12.77 mg/g로 증가한 반면에 속도 상수$(k_2)$는 0.284 g/mg/min에서 0.014 g/mg/min으로 감소하였다. 수피의 구리 흡착특성은 Langmuir와 Freundlich 등온식에 의해 모두 잘 표현되는 것으로 나타났다. 수피에 존재하는 카르복실산(carboxylic acid, RCOOH)이 구리 이온의 흡착에 관여하는 것이 확인되었으며, 특히 수산화나트륨을 이용하여 전처리한 수피에서 나타나는 구리의 높은 흡착효율은 수피에 존재한 에스테르(ester) 화합물과 카르복실산(carboxylic acid) 화합물이 가수분해되어 생성된 카르복실산 염(sodium carboxylate) 때문인 것으로 판단되었다.