• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 총회 및 춘계학술발표회
• /
• pp.122-126
• /
• 2002

Contaminant transport in porous media is characterized by solving an advection-dispersion equation(ADE). The ADE can cover equilibrium phenomena of interest, which include sorption, decay, and chemical reactions. Among these phenomena, sorption mechanism is described by several types of sorption isotherm. If we assume the sorption isotherm as linear, the solution of ADE can be easily procured. However, if we consider the sorption isotherm as non-linear isotherm like a Dual Reactive Domain Model (DRDM), the resulting differential equation becomes non-linear. In this case, the solution of ADE cannot be easily acquired by an analytic method. In this paper, we present the numerical analysis of ADE using a DRDM. The results reveal that even if sorption data may be fitted well using linear or non-linear isotherm, the characteristics of contaminant transport of the two cases are different from each other. To be concrete, the retardation of linear isotherm has stronger effect than that of the DRDM. As the non-linearity of sorption isotherm increases, the difference of retardation effects of the two cases becomes larger. For a pulse source, the maximum concentration of the linear model is higher than that of the DRDM, but the plume of the DRDM moves faster than that of the linear model. Behaviors of contaminant transport using the DRDM are consistent with common features of a linear model. For instance, biodegradation effect becomes larger as time goes by The faster the seepage velocity is, the faster the plume of contaminant moves. The plume of the contaminant is distributed evenly over overall domain in the event of high dispersion coefficient.

• 한국환경농학회지
• /
• 제41권4호
• /
• pp.276-281
• /
• 2022

BACKGROUND: Plastics that are used in our daily lives largely end up in the environment. In agricultural environments, plastic wastes and microplastics can be found due to the uses and improper management of plastic products (e.g., vinyl greenhouses and mulching vinyl). Microplastics can also interact with contaminants in the agricultural environment. Therefore, this study was set to investigate the sorption characteristics of tetracycline, one of widely used antibiotics, on microplastics. METHODS AND RESULTS: The sorption tests were carried out with the tetracycline solutions (0-30 mg L^-1) and microplastic films prepared from low density polyethylene (LDPE) and polyvinyl chloride (PVC). The residual tetracycline concentrations were analyzed and fitted to the Freundlich and Langmuir isotherm models. The tetracycline sorption patterns on LDPE and PVC films were described better with the Freundlich isotherm model than the Langmuir isotherm model. The isotherm model parameters suggested that the maximum sorption amount of tetracyline was greater for PVC, while the sorption affinity was greater for LDPE. CONCLUSION(S): Different types of microplastics can have different sorption characteristics of tetracycline. Therefore, there is a need for continuous research on the interaction of various types and shapes of microplastics and contaminants in the environment.

• 한국환경보건학회지
• /
• 제21권3호
• /
• pp.77-86
• /
• 1995

Lead(II) removal efficiency by natural kaolinite was investigated through laboratory experiments. This study was conducted in two phases-sorption and desorption. In the adsorption study, the influence of sorption kinetics and sorption isotherm and various parameters such as pH, temperature, coexisting other heavy metal ions on the lead adsorption was investigated. And desorption study was carried out in order to find the re-usability of kaolinite as an adsorbent. The results of the study are as follows. 1. Sorption kinetics was investigated under the condition of 2.5 mg/l adsorbent concentration, pH 6.5$\pm$0.05, temperature $30\pm 0.5\circ$C, initial lead(II) concentration 25 mg/l. Adsorption rate was initially rapid and the extent of adsorption arrived at adsorption equilibrium with 73% adsorption efficiency in an hour. 2. The sorption isotherm experiment was made with different initial lead(II) concentration. A linearized Freundlich equation was used to fit the acquired experimental data. As a result, Freundlich constants, the sorption intensity (1/n) was 0.47 and the measure of sorption (k) was 2.44. So, it was concluded that sorption of lead(II) by kaolinite is effective. 3. The effect of pH on lead(II) sorption by kaolinite shows that at a pH of 3, only 6% of the total lead(II) was adsorbed and at a pH 9, 97% of the lead(II) was removed. And the effect of temperature on lead(II) sorption by kaolinite shows that as the temperature increased, the amount of lead(II) sorption per unit weight of kaolinite increased. But the effect was minor (p<0.05). 4. Sorption isotherm of lead coexisting cadmium (II) or zinc (II) was lower than that of lead itself. It was caused by the result of competitive sorption to adsorption site. And there was no difference between the sorption isotherm of cadmium and zinc. 5. In desorption studies, only 5.12% desorption took place in distilled water, while 52.08% in 0.1 N hydrochloric acid. Consequently used kaolinite could be regenerated by hydrochoric acid.

• Nuclear Engineering and Technology
• /
• 제33권3호
• /
• pp.261-269
• /
• 2001

In this study, sorption experiments of uranium onto silica colloids were carried out and the effects of important geochemical parameters such as pH, ionic strength, carbonate concentration, colloid concentration, and total concentration of uranium were investigated. The sorption coefficients of uranium for silica colloids named as pseudo-colloid formation constants were about 10$^4$~ 10$^{5}$ mL/g depending on the experimental conditions. The effects of the geochemical parameters were found to be important in the sorption of uranium onto silica colloids. A Langmuir type sorption isotherm of uranium between silica colloids and the solution phase was also presented. The sorption mechanisms were explained by analyzing the effects of the geochemical parameters.

• 한국지반공학회논문집
• /
• 제27권4호
• /
• pp.43-50
• /
• 2011

본 연구에서는 국내 해안지역에 존재하는 카드뮴을 산업 폐기물인 제강슬래그를 이용하여 제거하고자, 제강슬래그의 카드뮴 제거 성능을 평가하였다. 이를 위해 회분식 실험으로 등온흡착 실험과 동적흡착 실험을 수행하였다. 등온 흡착 실험을 통해 제강슬래그의 카드뮴 제거는 Langmuir 모델이 Freundlich에 비해 잘 맞음을 확인하였고 최대 흡착량(${\beta}$)을 계산할 수 있었다. 동적흡착 실험결과의 경우, 유사이차 모델을 이용해 해석하였고 카드뮴의 초기농도가 높을수록 평형 흡착량 ($q_e$)은 증가하였고 반응상수 ($k_2$)와 초기반응속도 (h)는 줄어들었다. 모사해수 조건에서 $q_e$는 증류수 조건과 큰 차이가 없었지만 $k_2$와 h는 증류수에 비해 줄어들었다. 또한, 유사이차 모델을 통해 예측된 $q_e$이 등온흡착 실험에서 구한 평형 흡착량 ($C_s$)과 유사해 동적흡착 실험결과로 등온흡착 실험결과를 예측하는 것이 가능함을 확인하였으며 유사이차 모델을 이용해 목표 제거율에 도달하는 반응시간을 계산할 수 있었다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 추계학술발표회
• /
• pp.302-305
• /
• 2002

Scoria is a bomb-sized, generally vesicular pyroclast that is red or black in color and light in weight. In this study, scoria from Cheju was examined for the use as a sorbent. It is composed of plagioclase, olivine, hornblende, pyroxene, and glass, with an average composition of 49.84% SiO$_2$, 14.07% A1$_2$O$_3$, End 9.14% Fe$_2$O$_3$. Studies on kinetic isotherm sorption of Zn(II) onto scoria under various parameters such as initial zinc concentration, particle size, and adsorbent/adsorbate ratio were carried out using an agitated batch. The results suggest that the smaller scoria size and the larger adsorbent/adsorbate ratio produce the higher degree of Zn(II) removal. More effective removal also appears at lower initial Zn concentration. The sorption behavior of Zn(II) onto scoria seems to be mainly controlled by cation exchange. Studies on equilibrium isotherm sorption of other heavy metals (Pb, Cu, Cd) onto scoria were also conducted and compared with those onto powdered activated carbon (PAC) and non-organic matter scoria (NOS), The results suggest that the Cheju scoria has the slightly higher sorption capability than PAC and NOS, and the order of the effective sorption onto scoria and PAC is Pb > Cu > Zn > Cd. The monometal sorption onto scoria is more stronger than the competitive sorption.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.521-528
• /
• 1999

As the size of our industry and population inclose, the byproducts such as municipal solid wastes, industrial wastes are in the increasing phase. The treatment of such things is rising as a social problem. Today, the final disposal of these wastes depends mostly on the landfill, and the sanitary landfill is required and designed for preventing soil and groundwater contamination. Clays have been used for a liner material of a sanitary landfill, however, the high quality clay is hard to come by and quite expensive as a lining material in our country. Using the waste lime produced abundantly every year from chemical processes was studied here, made from the proper mixing of the bentonite and the waste lime meets the regulations from the USEPA. The soil property index tests (sieve analysis, specific gravity test Atterberg limit test) were performed, and at last to confirm the sorption characteristics of the bentonite and the waste lime the sorption isotherm equilibrium test and the sorption isotherm were performed with Toluene and Ethylbenzene which are the main components of the leachate from the landfill.

• 대한지하수환경학회지
• /
• 제4권2호
• /
• pp.78-84
• /
• 1997

수도권 매립지 지반의 침출수에 대한 흡착성 분석을 위한 벳치실험과 컬럼시험을 수행하였다. 벳치실험에서는 제 1공구와 제 3공구 각각에서 채취한 지반토의 무기물, 중금속에 대한 흡착능과 흡착등온식을 알아보았으며 컬럼실험에서는 염소, 요오드, 칼륨, 납, 카드뮴을 사용하여 분산성과 오염 저감능력을 알아보았다. 시험결과 토양 시료 모두 Freundlich 등온식에 잘 따르는 것을 확인할 수 있었으며, 해성점토시료 모두 중금속과 무기물인 칼륨에 대한 흡착력이 큰 것으로 확인되었다. 시료 채취 지점의 지질변화에 따른 실험된 성분에 대한 흡착성의 차이는 거의 없는 것으로 나타났다.

• 멤브레인
• /
• 제3권2호
• /
• pp.79-82
• /
• 1993

유리전이온도가 $95^{\circ}C$인 폴리스티렌 균질막에서 $CO_2$의 수착과 투과실험을 온도는 $60^{\circ}C$C, 수착실험은 1.6 MPa 범위, 투과실험은 2.5 MPa 범위 내에서 각각 행하였다. 낮은 기체압력하에서는 수착등온선이 dual-mode sorption model에 일치하였으나 1.3 MPa 이상에서는 직선이었고, 직선부분은 원점까지 외삽되었다. 평균투과계수의 압력의존성은 dual-mode mobility model로부터 위로 편기되었다. 수착등온선으로부터 폴리스티렌 막은 1.3 MPa의 기체압력에서 수착된 $CO_2$의 가소화거동에 의해서 유리전이가 일어난다는 것을 알았고, 이는 평균투과계수의 증가와 일치하였다.

• 한국지반공학회논문집
• /
• 제26권9호
• /
• pp.37-45
• /
• 2010

본 연구에서는 지하수에 존재하는 비소를 산업 폐기물인 제강 슬래그를 이용하여 제거하고자, 제강 슬래그에 대한 비소의 흡착특성을 규명하였다. 이를 위해 등온흡착 실험과 동적흡착 실험을 수행하였고, 흡착반응 후 용액의 화학적 특성을 분석하였다. 실험 결과, 흡착 실험을 수행한 모든 용액은 염기 상태로 존재하였으며(pH 9이상), 칼슘의 농도가 가장 높았다(30~50mg/L). 등온흡착 실험결과는 Langmuir 모델보다Freundlich 모델에 적용하는 젓이 더 합리적이였으며, 제강 슬래그에 As(V)가 As(III)보다 약 87% 더 많이 흡착되는 것으로 확인됐다. 동적흡착 실험결과의 경우, 유사일차모델보다 유사이차모델을 통해 해석하는 것이 더 적합하였다. 비소의 초기농도가 높을수록 평형 흡착량($q_e$)과 완화시간($t_r$) 이 모두 증가하였으며, As(V)는 As(III)보다 평형 흡착량이 많고 완화시간은 짧은 것을 확인할 수 있었다. 또한, 유사이차모델을 통해 예측된 평형 흡착량이 등온흡착 실험에서 구한 평형 흡착량과 유사해 동적흡착 실험결과로 등온흡착 실험결과를 예측하는 것이 가능함을 확인하였다.