• 제목/요약/키워드: Sorption Isotherm

검색결과 186건 처리시간 0.034초

VARIATIONS OF CONTAMINANT RETARDATION FACTOR IN THE PRESENCE OF TWO MOBILE COLLOIDS

  • Kim, Song-Bae;Kim, Dong-Ju
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2001년도 추계학술발표회
    • /
    • pp.115-119
    • /
    • 2001
  • Contaminant retardation factor is derived from the colloidal and contaminant transport equations for a four-phase porous medium: an aqueous phase, two mobile colloidal phases, and a solid matrix. It is assumed that the contaminant sorption to solid matrix and colloidal particles and the colloidal deposition on solid matrix follow the linear isotherms. The behavior of the contaminant retardation factor in response to the change of model parameters is examined employing the experimental data of Magee et al. (1991) and Jenkins and Lion (1993). In the four-phase system, the contaminant retardation factor is determined by both the contaminant association with solid matrix and colloidal particles and the colloidal deposition on solid matrix. The contaminant mobility is enhanced when the affinity of contaminants to mobile colloids increases. In addition, as the affinity of colloids to solid matrix decreases, the contaminant mobility increases.

  • PDF

양생초기 콘크리트내의 수분확산에 관한 연구 (A Study on Moisture Diffusion in Young Concrete)

  • 한만엽
    • 콘크리트학회지
    • /
    • 제5권3호
    • /
    • pp.152-160
    • /
    • 1993
  • 양생 초기에 있어서 콘크리트의 투수계수는 콘크리트의 건조수축에 영향을 미치는 요인으로서 콘크리트내의 물의 이동과 관련된 중요한 변수이다. 콘크리트의 특수성에 관한 연구는 주로 콘크리트의 건조수축이나, 동결융해에 대한 내구성 등과 연관되어 있다. 이들 대부분의 측정결과는 염소 이온등을 이용한 간접 측정방법이거나 충분히 양생된 안정한 콘크리트를 대상으로 하는 것이 대부분이므로 양생초기의 콘크리트의 투수계수에 관한 연구는 거의 없다고 할 수 있다. 본 연구에서는 싸이크로미터라는 수리에너지를 측정하는 쎈서를 이용하여 콘크리트의 투수계수의 측정을 시도하였다. 콘크리트의 투수계수와 확산계수를 측정하기 위한 세가지의 방법을 제시하였으며, 이를 적용하는 실험도 실시하였다. 또한 투수계수와 확산계수간의 변환을 위한 등온 흡수선을 개발, 적용하였다.

Silk Fibroin 막에 관한 연구 (II) -Silk Fibroin 막에 대한 산성염료의 흡착- (Studies on Silk Fibroin Membranes(II) -Adsorption of Acid Dyes in Silk Fibroin Memberane-)

  • 최해욱;박수민;김경환
    • 한국염색가공학회지
    • /
    • 제6권3호
    • /
    • pp.60-66
    • /
    • 1994
  • With the view of studying on the dual adsorption mechanism of acid dyes in connection with the structural difference of silk fibroin, silk fiber and silk fibroin memberane were used for equilibrium dyeing at $60^{\circ}C$, $70^{\circ}C$, $80^{\circ}C$ and pH 3.2, pH 5.0. The dyes used were C.I.Acid Orange 7 and C.I.Acid Red 88 introduced aromatic hydrocabon into Acid Orange 7. From the adsorption isotherm experiment, the total uptake of dyes can be described by Langmuir sorption and Nernst partition. Nernst partition. Nernst partition coefficient $K_1$ decrease of crystalline regions and orientation. The saturation value S of Acid Red 88 were large than total amino group contents and it was attributed it hydrophobic bond. On the other hand, the standard afficity and enthalpy were increased with the in crease of hydrophobic part of dyes. Both $k_1$ and $K_2$ were decreased with the increase of pH, but $k_2$ were more effected than $K_1$.

  • PDF

Removal of Uranium from Aqueous Solution by Alginate Beads

  • Yu, Jing;Wang, Jianlong;Jiang, Yizhou
    • Nuclear Engineering and Technology
    • /
    • 제49권3호
    • /
    • pp.534-540
    • /
    • 2017
  • The adsorption of uranium (VI) by calcium alginate beads was examined by batch experiments. The effects of environmental conditions on U (VI) adsorption were studied, including contact time, pH, initial concentration of U (VI), and temperature. The alginate beads were characterized by using scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy. Fourier transform infrared spectra indicated that hydroxyl and alkoxy groups are present at the surface of the beads. The experimental results showed that the adsorption of U (VI) by alginate beads was strongly dependent on pH, the adsorption increased at pH 3~7, then decreased at pH 7~9. The adsorption reached equilibrium within 2 minutes. The adsorption kinetics of U (VI) onto alginate beads can be described by a pseudo first-order kinetic model. The adsorption isotherm can be described by the Redlich-Peterson model, and the maximum adsorption capacity was 237.15 mg/g. The sorption process is spontaneous and has an exothermic reaction.

석탄광산배수처리슬러지에 Na와 S를 첨가하여 개량한 흡착제의 세슘 흡착 특성 규명 (Identification of Sorption Characteristics of Cesium for the Improved Coal Mine Drainage Treated Sludge (CMDS) by the Addition of Na and S)

  • 전소영;김단우;변정현;신대현;양민준;이민희
    • 자원환경지질
    • /
    • 제56권2호
    • /
    • pp.125-138
    • /
    • 2023
  • 수계 내 세슘(cesium: Cs)을 제거하기 위하여 개발된 대부분의 기존 Cs 흡착제들은 원재료 값이 고가라는 단점과, 해수와 같이 높은 이온 강도와 낮은 Cs 농도를 가지는 대규모의 오염수를 실질적으로 정화하는데 한계를 가지고 있었다. 본 연구에서는 석탄광산배수를 처리하는 과정에서 생성되는 슬러지(CMDS)에 Na와 S를 첨가하여 친환경적이고 높은 Cs 제거 효율을 가지는 Cs 흡착제를 개발하였다. Fe 및 Ca 함량이 풍부한 CMDS를 1차 소재로 사용하였고, 열처리 과정으로 Na와 S를 첨가하여 새로운 Cs 흡착제를 제조하였다(이하 본 연구에서 개발한 흡착제는 Na-S-CMDS라 명명함). Na-S-CMDS의 Cs 흡착능 및 흡착 기작을 평가하기 위해 실험실 규모의 실험과 흡착 동역학 및 등온 모델링 연구를 수행하였으며, XRF, XRD, SEM/EDS, XPS 등의 분석을 통해 Na-S-CMDS의 물리화학적, 광물학적 특성을 조사함으로써 Cs 흡착 기작을 규명하였다. 흡착 배치 실험 결과, Cs은 빠르게 Na-S-CMDS에 흡착되어 1시간 내 평형에 도달하였으며, 낮은 Cs 농도(0.5 mg/L) 조건에서도 높은 Cs 제거 효율(> 90.0%)을 보였다. 흡착 등온 모델링 결과, 단일 흡착을 가정하는 Langmuir 흡착 등온 모델에 대응되는 경향을 보였으며, 흡착 동역학 모델링 결과 흡착 경향이 유사 2차 속도(pseudo second order kinetic) 모델과 일치하는 경향을 보였고, 이러한 결과는 단순한 물리적 흡착보다 이온 교환과 같은 화학적 흡착이 우세함을 의미한다. 고농도의 Cs 용액으로 반응시킨 Na-S-CMDS의 XRF/XRD 분석 결과, Na-S-CMDS 내 Na 함량은 감소하고 흡착 전 존재하던 erdite (NaFeS2·2(H2O))가 관찰되지 않는 것을 통해, Na+과 Cs+ 사이에서 활발한 이온 교환 반응이 진행되었음을 알 수 있었다. XPS 분석 결과, Na-S-CMDS에서 Cs와 S 사이의 강한 결합 작용이 관찰되었으며, 이러한 Cs와 S(또는 S-복합체)내 결합에너지 감소도 Na-S-CMDS의 Cs 흡착능을 증가시키는 요인으로 판단되었다. 본 연구를 통해 기존에 폐기물로 처리되었던 석탄광산배수슬러지를 개량하여 제조한 Na-S-CMDS는 기존의 Cs 흡착제보다 제조 비용이 저렴하고, 해수 및 지하수와 같이 이온 강도는 높지만 Cs 농도가 낮은 대규모 오염 수계에서도 Cs 흡착능이 높게 유지되어, 현장에서 효과적인 Cs 흡착제로 사용할 수 있을 것으로 기대한다.

광미내 Zn의 탈착 특성과 지렁이에 대한 생이용성 (Desorption Characteristics and Bioavailability of Zn to Earthworm in Mine Tailings)

  • 오상화;신원식
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제16권4호
    • /
    • pp.38-52
    • /
    • 2011
  • Sorption and sequential desorption experiments were conducted for Zn using a natural soil (NS) in background status by aging (1, 30 and 100 days). The sorption isotherm showed that Zn had high sorption capacity but low sorption affinity in NS. Sequential desorption was biphasic with appreciable amount of sorbed Zn residing in the desorption-resistant fraction after several desorption steps. The biphasic desorption behavior of Zn was characterized by a biphasic desorption model that includes a linear term to represent labile or easily-desorbing fraction and a Langmuirian-type term to represent desorption-resistant fraction. The biphasic desorption model indicated that the size of the maximum capacity of desorption-resistant fraction ($q^{irr}_{max}$) increased with aging in NS. Desorption kinetics and desorption-resistance of Zn in the soils collected from mine tailings (MA, MB and MC collected from surface, subsurface soils and mine waste, respectively) were investigated and compared to the bioavailability to earthworm (Eisenia fetida). Desorption kinetic data of Zn were fitted to several desorption kinetic models. The ratio ($q_{e,d}/q_0$) of remaining Zn at desorption equilibrium ($q_{e,d}$) to initial sorbed concentration ($q_0$) was in the range of 0.53~0.90 in the mine tailings which was higher than that in NS, except MA. The sequential desorption from the mine tailings with 0.01M Na$NO_3$ and 0.01M $CaCl_2$ showed that appreciable amounts of Zn are resistant to desorption due to aging or sequestration. The SM&T (Standard Measurements and Testing Programme of European Union) analysis showed that the sum of oxidizable (Step III) and residual (Step IV) fractions of Zn was linearly related with its desorption-resistance ($q^{irr}_{max}$) determined by the sequential desorption with 0.01M Na$NO_3$ ($R^2$= 0.9998) and 0.01M $CaCl_2$ ($R^2$= 0.8580). The earthworm uptake of Zn and the desorbed amount of Zn ($q_{desorbed}$ = $q_0-q_{e,d}$) in MB soil were also linearly related ($R^2$ = 0.899). Our results implicate that the ecological risk assessment of heavy metals would be possible considering the relation between desorption behaviors and bioavailability to earthworm.

조미 건조김의 흡습특성에 관한 연구 (Study on the Moisture Sorption Characteristics of Seasoned Dried Laver)

  • 임종환
    • 한국식품영양과학회지
    • /
    • 제22권4호
    • /
    • pp.476-483
    • /
    • 1993
  • 상업적으로 생산되는 조미김의 흡습특성을 조사하기 위하여 조미김과 2종의 흡습제 (silica gel, zeolite)의 등온흡습곡선을 30, 40, 5$0^{\circ}C$에서 포화염용액을 사용하여 측정하였다. 실험온도 및 상대습도 범위내에서 평형수분함량에 도달하는데 조미김은 4~6시간, silica gel은 20~25시간, zeolite는 43~46시간이 소요되었다. 조미김과 흡습제의 등온흡습곡선은 모두 전형적인 sigmoid형 곡선을 나타냈다. BET식을 활용하여 구한 단분자층 수분함량은 조미김이 각 온도(30, 40, 5$0^{\circ}C$)에서 5.26, 4.46, 3.49% (d.b.)이었고, silica gel은 17.32, 15.24, 12.89% (d.b.), 그리고 zeolite가 16.87, 14.92, 14.33%(d.b.)로서 조미김에 비해 흡습제가 높은 범위의 단분자층 수분함량을 나타냈다. 또한 단분자층 수분함량은 온도가 증가함에 따라 실험온도 범위 내에서 직선적으로 감소함이 발견되었다 포장재의 투습도 역시 온도의 영향을 받음을 알 수 있었는데, 조미김 포장재의 투습계수의 온도의존성은 Arrhenius식으로 표시할 수 있었다.

  • PDF

소나무 수피의 화학적 처리에 의한 Cu(II) 흡착 효과 (Efficacy of Cu(II) Adsorption by Chemical Modification of Pine Bark)

  • 박세근;김하나;김영관
    • 대한환경공학회지
    • /
    • 제29권8호
    • /
    • pp.930-937
    • /
    • 2007
  • 본 연구에서는 소나무 종류인 Pinus densiflora로부터 채취한 수피를 이용하여 수용액으로부터 구리 제거를 위한 회분식 흡착 실험을 수행하였다. 구리 흡착에 수피의 화학적 처리가 미치는 효과를 알아보기 위해 1 N 수산화나트륨(NaOH)과 1 N 염산(HCl)을 이용하여 전처리하였다. 구리 농도가 100 mg/L이고 pH가 $3\sim6$인 수용액에서 수산화나트륨(NaOH)을 이용한 수피의 화학적 전처리는 구리의 흡착량을 $139\sim184%$ 정도 증가시키는 효과를 나타냈으나, 염산(HCl)을 이용한 수피의 전처리는 구리의 흡착량을 $37\sim42%$ 정도 감소시키는 효과를 나타냈다. 대체적으로 수피에 의한 구리 흡착은 pH $5\sim6$에서 최대 흡착량을 나타내기는 하였으나, 주어진 pH 범위내에서 수용액의 pH가 구리 흡착에 미치는 효과는 크지 않았다. 수피의 구리 흡착은 유사 2차 동역학 모델로 설명이 가능하였으며, 수산화나트륨(NaOH)으로 전처리한 수피의 경우 초기 농도가 100 mg/L에서 2배로 증가함에 따라 유사 2차 동역학 모델식으로부터 계산된 흡착량$(q_e)$은 6.58 mg/g에서 12.77 mg/g로 증가한 반면에 속도 상수$(k_2)$는 0.284 g/mg/min에서 0.014 g/mg/min으로 감소하였다. 수피의 구리 흡착특성은 Langmuir와 Freundlich 등온식에 의해 모두 잘 표현되는 것으로 나타났다. 수피에 존재하는 카르복실산(carboxylic acid, RCOOH)이 구리 이온의 흡착에 관여하는 것이 확인되었으며, 특히 수산화나트륨을 이용하여 전처리한 수피에서 나타나는 구리의 높은 흡착효율은 수피에 존재한 에스테르(ester) 화합물과 카르복실산(carboxylic acid) 화합물이 가수분해되어 생성된 카르복실산 염(sodium carboxylate) 때문인 것으로 판단되었다.

인위적으로 풍화시킨 일라이트 표면의 Cs 흡착 특성 (The Sorption Properties of Cs on the Surface of Artificially Weathered Illite)

  • 김영규;이은정
    • 한국광물학회지
    • /
    • 제17권3호
    • /
    • pp.235-243
    • /
    • 2004
  • 일라이트는 닳은 모서리(frayed edge)의 존재에 의하여 다른 알칼리 금속과 비교할 때 낮은 농도에서 선택적으로 Cs을 더 잘 흡수하는 것으로 알려져 있다. 이 닳은 모서리는 기존의 일반적인 흡착실헐에 의하여 존재한다고 알려져 있지만 다른 분석방법으로는 증명되지 않은 상태이다. 일라이트 표면에서의 Cs의 흡착특성을 알아보기 위하여 닳은 모서리를 증가시킨 인위적으로 풍화된 일라이트와 Cs을 여곤 농도에서 반응을 시켰다. 일라이트는 0.001 M의 HC1 용액에서 1시간, 2일, 14일 동안 반응시켜 K 이온의 방출 및 XRD, SEM, TEM 등으로 풍화상태를 확인하였다. 풍화되지 않은 일라이트와 풍화된 일라이트를 Na-일라이트로 교환한 후 $10^{-3}$$10^{-7}$ M 농도의 CsCl 용액에서 24시간 반응시켰다. Cs의 흡착특성은 $10^{ -5}$M Cs 용액농도를 기준으로 뚜렷한 차이를 보이다. 일라이트에 흡착된 Cs은 낮은 Cs 농도 (<$10^{-5}$ M )에서 높은 Cs 농도보다 상대적으로 많은 Cs이 흡착되었으며 이러한 상대적 흡착 농도는 용액의 농도가 낮아질수록 높아진다. 일반적으로 흡착된 Cs는 풍과가 오래된 시료일수록 낯은 농도에서 뚜렷하나 높은 농도에서는 그 차이가 적다. 이러한 결과는 낮은 농도에서 닳은 모서리라고 불리는 흡착자리의 존재에 의한 것이고 이러한 자리는 풍화가 진행됨에 따라서 증가된다.

국산재의 응용물성연구II: 잣나무 낙엽송의 수분흡착성 및 열적·전기적·음향적 성질 (Study on Physical Properties of Domestic Species II: Sorption, Thermal, Electrical and Acoustic Properties of Pinus koraiensis and Larix kaempferi)

  • 변희섭;이원희;박병수;정성호;강호양
    • Journal of the Korean Wood Science and Technology
    • /
    • 제36권4호
    • /
    • pp.1-10
    • /
    • 2008
  • 주요 국산재의 여러 가지 응용물성을 매년 3수종씩, 3년에 걸쳐 조사하였다. 전보에 이어 우리나라의 침엽수 대표 수종인 잣나무 및 낙엽송을 사용하였다. 매년 동일한 장치와 실험조건으로 실험하였기 때문에 모든 수종에 대한 결과를 상호 비교할 수 있었다. 수분흡착성 실험은 목분을 이용하였으며, 넓은 범위의 상대습도조건에 따른 평형함수율과 흡착등온선을 구하였다. 열전도율과 열확산률은 열선열전도장치를, 전기의 부피저항률과 저항은 고전기저항계를 이용하여 측정하였다. 정목재와 판목재의 열적 전기적 특성차이가 관찰되었는데 이는 해부학적 차이에 의한 것으로 보인다. 음향적 성질은 음향측정시스템을 사용하여 동적탄성률, 내부마찰을 측정하였다. 본 논문의 결과들은 목재구조물 설계, 휴대용 목재수분계 보정, 음향적 성질 등에 필요한 기본 자료를 제공한다.