• Journal of the Korean Society of Costume
• /
• v.56 no.3 s.102
• /
• pp.116-128
• /
• 2006

The purpose of this study is to investigate Seon expressed in the costume of Chinese Song. For the purpose, this researcher classified types of Seon, found in the Chinese costume, in terms of composition method, decorative technique and used materials. In addition, the researcher attempted to analyze formative characteristics of Sean in accordance with the range and post of use, pattern and color combination. Seon expressed in the costume of Chinese Song can be classified into standard, decoration, application and Buseon in type. When the typical distribution of Seon expressed in the costume of Chinese Song, standard type was highest in percentage, especially different color type. Looking at the range of use, Seon was mainly used for outfits, especially Jikcheol(直?) and Hakchangeui for men and Baeja(背子) for women. Looking at the post of use, Seon was mainly used to edges of costume and sometimes also to seams. In regard to materials of Seon, they were selectively used depending on the existence or non-existence, size and brilliance or non-brilliance of pattern employed in the texture of Seon. The most commonly used pattern of Seon was single-type pattern, especially the pattern of plant. Pattern arrangement was most often filling in type. Concerning the color combination of Seon, men's dress most often used black-white combination, followed by different color combination while, women's dress most often employed complementary color combination, followed by different color combination.

• Korean Journal of Materials Research
• /
• v.15 no.4
• /
• pp.252-256
• /
• 2005

We removed the bluish of the natural ruby successfully by vacuum annealing, and measured the color evolution with annealing time and temperature. We varied the anneal temperature and time $800\~1500^{\circ}C$ and $3\~26$ hrs, respectively. The color evolution of rubies with annealing condition was recorded by a digital camera and a color coordination visible spectrometer. We determined the optimum bluish eliminating annealing condition was $1500^{\circ}C-3hr$, which conserving the natural inclusions. We suggest the bluish shrink with diffusion coefficient of $D=(5\times10^{-3}){\exp}(-200.000/RT)[cm^2/s]$. We propose the color of ruby may be determined as the identical red color if the color difference between two samples are less than 1.0, and the color difference nay be an auxiliary standard to evaluate the color of rubies.

• Journal of the Korean Ceramic Society
• /
• v.53 no.4
• /
• pp.450-455
• /
• 2016

Color change in single-crystal, yellow, red, purple, and colorless cubic zirconias (CZs) was investigated as a function of annealing in vacuum and air atmosphere at $800-1400^{\circ}C$ for 30 min, for development of a damascene process of plugging a precious metal paste at the elevated temperature. Coloring-element contents of the CZs were evaluated using WD-XRF, and the color change determined visually by naked eye, and using a digital camera and UV-Vis-NIR color analyzer. WD-XRF showed that all of the CZs had cubic-phase stabilizer elements and coloring elements. All CZs that underwent vacuum annealing exhibited a slight color change at $<900^{\circ}C$, while their colors began to change to black at $1100^{\circ}C$, and became opaque black at $1400^{\circ}C$. After air annealing, there was almost no color change up to $1400^{\circ}C$. Since red and purple CZs showed greater color difference (CD) values than the others, the degree of CD is likely to depend on the original color of the CZ due to the different stabilities of their coloring elements during annealing. Based on our results, it is suggested that annealing in air at $<900^{\circ}C$ is advantageous, and assorted colored CZs can be used for precious metal damascene.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.1
• /
• pp.57-64
• /
• 1994

This study investigates the costumes of the Most Reverend Priest, which shows a portrait of the Buddhist monk in Koryo dynasty, owned by SONG KWANG Temple. A surplice and a long sleeved Buddhist robe was chiefly shown up a portrait of a Buddhist monk. The purpose of this study find out the color, form, pattern, material, adornment of the costumes which is appeared a portrait, and also seek to changing process according to the times. the finding in this paper are ; * A surplice - color : red, green, yellow etc. form' big size surplice, provision surplice. pattern : no. material : unstriated silk. adornment' bolt, ribbon. * A long sleeved Buddhist robe- color : grey, blue, dark blue, pink, green, chestnut .etc. pattern : no. In comparison with a survery of previous studies of Buddhist comstumes, the color and type of the Koryo dynasty are more brilliant various color. In other words, the social status of monk in the Koryo is higher than present day.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.438-440
• /
• 2005

At present, characteristic of high color reproduction for LCD TV is needed in Display market according to start mass production of LCD TV. Therefore development target for LCD is focused on improvement of color reproduction. The improving methods of high color reproduction are alteration of color Filter or Red, Green, Blue phosphor alteration of CCFL. But decrease of luminance and panel transmittance is caused by alteration of Color Filter. Accordingly, we completed LCD with high color reproduction by the most suitable emission spectrum of CCFL phosphor at panel with conventional color filter. In this experiment, we knew that LCD applied to CCFL with high color rendering characteristic had color reproduction range of 81% compared with NTSC in CIE color coordinate. According to increase of intensity peak and alteration of Red, Green, Blue phosphor spectrum, we made LCD with high color reproduction characteristic. In conclusion we achieved improvement of color reproduction ratio by alteration of CCFL phosphor without changing color filter.

• Korean Journal of Materials Research
• /
• v.28 no.4
• /
• pp.221-226
• /
• 2018

The property changes of 18, 14, and 8K green gold alloys for jewelry are observed by adding 0.0, 3.0, and 5.0 wt% of indium (In), respectively. To check the composition of the alloys, an energy dispersive spectroscopy (EDS) analysis is conducted. Color and microstructure analysis is executed through bare-eye, macro camera, UV-VIS-NIR-colormeter, and optical microscope. The melting point, wetting angle, and hardness are measured using TGA-DTA, a wetting angle tester, and a Vickers hardness tester. The EDS analysis result demonstrates that each of the green gold alloys was manufactured with purposed contents. The color analysis result shows that the color of the alloys is similar to the color of the conventional 4 wt%-Cd 18K green gold, and the green color improves as the In content increases. The micro structure analysis result demonstrates that grain refinement improves as the amount of In increases. Enhancements in the melting point, wettability, and Vickers hardness changes appear as the In content increases and Au content decreases. The hardness is up to 260, which implies good durability. Therefore, the results suggest that the proposed 18, 14, and 8K In-added green gold alloys enhance the properties of jewelry products with regard to the green color, castability, and durability.

• Journal of the Korean Ceramic Society
• /
• v.52 no.2
• /
• pp.165-170
• /
• 2015

We employed the high-pressure high temperature (HPHT) process to enhance the colors of natural sapphires to obtain a vivid blue. First, we analyze the content of the coloring agent $Fe_2O_3$ using the wavelength dispersive X-ray fluorescence (WD-XRF) method. The HPHT procedure operates under 1 GPa at various temperatures of 1700, 1750, and $1800^{\circ}C$ for 5 minutes using a cubic press. We determine the color changes using the optical microscopic images, UV-VIS near-infrared (NIR) spectra, micro-Raman spectra, and Fourier transform-infrared (FT-IR) spectra for all sapphire samples before and after the treatment. The optical microscopic results indicate that the HPHT process can enhance the sapphire color to a vivid blue at temperatures above $1750^{\circ}C$. The UV-VIS-NIR spectra identify the color changes explicitly and quantitatively through providing the Lab color scales and color differences. Both results demonstrate that the colors of natural sapphires can be enhanced to a vivid blue using the HPHT process above $1750^{\circ}C$ under 1 GPa for 5 minutes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.727-731
• /
• 2005

We introduce a method of color-coded illumination that is simple and fast. The purpose of this study is the real-time shape measurement of three-dimensional object by using color-coded information. The object is illuminated by a prism color spectrum. A color spectrum of a white-light source is imaged onto the object by illumination from one certain direction. The object is observed by a color CCD camera from a direction of observation, which is different from the direction of illumination. It can be evaluated by the red, blue, green using a inherence colors of hue value are good point.

• Journal of information and communication convergence engineering
• /
• v.15 no.3
• /
• pp.187-192
• /
• 2017

Autonomous driving vehicle research demands complex road and lane understanding such as lane departure warning, adaptive cruise control, lane keeping and centering, lane change and turn assist, and driving under complex road conditions. A fast and robust road lane detection subsystem is a basic but important building block for this type of research. In this paper, we propose a method that performs road lane detection from black box input. The proposed system applies Random Sample Consensus to find the best model of road lanes passing through divided regions of the input image under HSV color model. HSV color model is chosen since it explicitly separates chromaticity and luminosity and the narrower hue distribution greatly assists in later segmentation of the frames by limiting color saturation. The implemented method was successful in lane detection on real world on-board testing, exhibiting 86.21% accuracy with 4.3% standard deviation in real time.

• Journal of information and communication convergence engineering
• /
• v.8 no.1
• /
• pp.19-22
• /
• 2010

A finger language helping hearing impaired people in communication A sign language helping hearing impaired people in communication is not popular to ordinary healthy people. In this paper, we propose a method for real-time sign language recognition from a vision system using color information and fuzzy clustering system. We use YCbCr color model and canny mask to decide the position of hands and the boundary lines. After extracting regions of two hands by applying 8-directional contour tracking algorithm and morphological information, the system uses FCM in classifying sign language signals. In experiment, the proposed method is proven to be sufficiently efficient.