• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.1
• /
• pp.137-142
• /
• 2003

This study was carried out to examine the effects of gamma irradiation on the color removal, antioxidation, DPPH radical scavenger, and antimicrobial activity of Schizandra fructus extracts by different solvents. Schizandra fructus was extracted by hot water, ethanol, acetone and methanol, and the extracts were irradiated 10, 20 and 30 kGy with gamma rays. Hunter color L-value was increased by irradiation in a dose-dependent manner, resulting in brighter color for all solvents used. The a and b values were decreased by irradiation in a dose-dependent manner. Antioxidant activity of the ethanol extract of Schizandra fructus against soybean oil was the highest. The free radical scavenging activity was the strongest in hot water extract. All solvent extracts from Schizandra fructus had the strongest antimicrobial activities to B. subtilis, B. natto, B megaterium, S. aureus, Sal. typhymurium and E. coli. These results suggested that Schizandra fructus extracts have a strong potential as natural food preservatives and cosmetic raw materials. Furthermore, irradiation may not influence adversely on biological activites of the extracts when irradiated up to 30 kGy.

• Korean Chemical Engineering Research
• /
• v.53 no.4
• /
• pp.457-462
• /
• 2015

Hemicellulosic hydrolysates contain not only sugars but also several kinds of ethanol fermentation inhibitory substances such as carboxylic acids, furans and phenolic compounds. In this work, emulsion liquid membrane (ELM) was chosen as a separation technology to remove the inhibitors. A basic simulated hemicellulosic hydrolysate was composed of xylose as sugar, dilute sulfuric acid solution as solvent, and acetic acid as carboxylic acid, and furfural as furan derivative or p-hydroxybenzoic acid(HBA) as phenolic compound was added to the hydrolysate when necessary. Acetic acid and HBA as weak acid could be selectively removed from the hydrolysates in all the ELM systems considered here, but furfural as aldehyde was quite hard to remove. Also, when HBA was added to the basic simulated hemicellulosic hydrolysate, both of acetic acid and HBA in the feed phase could be selectively removed up to 99% in an ELM system with tributyl phosphate as extractant.

• Journal of the Korean Chemical Society
• /
• v.41 no.8
• /
• pp.392-398
• /
• 1997

A method of selective determination of inorganic and organic mercury compounds has been described. The $CHCl_3$ solution of a high molecular quaternary alkylammonium salt, Aliquat 336 was used for the simultaneous preconcentration of both inorganic, $Hg^{2+}$ as its thiocyanate complex, and organic mercury compounds, $CH_3HgCl$ and $C_2H_3O_2$ $HgC_6H_5$ by extraction from their aqueous solution. Selective separation of the inorganic mercury from the extract was followed by stripping with 3 M $HClO_4 $ solution for the subsequent determination by CVAAS. Organic mercury was also determined by CVAAS after removal of $CHCl_3solvent$ from the extract and decomposition of the residue with 4% $KMnO_4 $-1 MH_2$S0_4$. The mixtures of inorganic and organic mercury compounds contained 1.0 $\mug$ as Hg in 50 mL of sample solution(0.02 ${\mu}gHg/mL$) were analysed within ${\pm}6%$ by absolute errors.

• Composites Research
• /
• v.33 no.2
• /
• pp.76-80
• /
• 2020

In this study, vacuum bag hot-press (V-HP) process can be used as an out-of-autoclave (OOA) process by improving the inefficient process of the autoclave forming method with excellent physical properties and surface quality. A carbon fiber composite was molded via V-HP process and analyzed the physical properties and microstructures between composites manufactured by autoclave (AC) process and hot-press process (HP). The tensile strength of the composite materials using the V-HP process was 320.6 MPa and the AC process samples found to be substantially close to the tensile strength of 335.3 MPa. As a result of confirming the surface quality of the composite material using SEM, it was confirmed that in the V-HP process, the removal state of pores due to volatile solvent in the resin was slightly lower than that of the AC process, but it had a considerably superior surface compared to the HP process.

• Macromolecular Research
• /
• v.11 no.5
• /
• pp.297-302
• /
• 2003

The imidization and cure reaction of a thermosetting phenylethynyl-terminated amic acid (LaRC PETI-5) in film form have been monitored as a function of temperature by means of a steady-state fluorescence technique using a front-face illumination method. The variation of the fluorescence emission spectra of LaRC PETI-5 can be divided into four temperature regions; Region I: below 15$0^{\circ}C$, Region II: 150-25$0^{\circ}C$, Region III: 250-35$0^{\circ}C$, and Region IV: above 35$0^{\circ}C$. The fluorescence spectra in Region I are largely influenced by residual N-methyl-2pyrrolidinone in the polymer and also slightly by partial imidization of the polymer. There is a combined effect of imidization and solvent removal on the fluorescence behavior in Region II. The spectra in Regions III and IV are due significantly to the cure reaction of LaRC PETI-5 and to a post-cure effect of the polyimide, respectively. This spectroscopic evidence indicating the transformation of the amic acid imide oligomer into the corresponding polyimide via imidization and cure, agrees well with thermal analysis results obtained previously. The intermediate stage of cure in the range of 250-30$0^{\circ}C$ predominantly influences the change of the fluorescence intensity. The later stage above 30$0^{\circ}C$ significantly influences the position of the spectrum. This fluorescence study also supports the mechanism proposed in earlier work that the crosslinking reaction takes place at the reaction sites in the conjugated polyene and the phenylethynyl end group in the polyimide chain.

• Journal of Adhesion and Interface
• /
• v.1 no.1
• /
• pp.15-22
• /
• 2000

To prepare acrylic type pressure-sensitive adhesive, quarter polymers were synthesized from butylacrylate (BA), 2-ethylhexylacrylate (2-EHA), methyl methacrylate (MMA), 2-hydroxyethylmethacrylate (2-HEMA). The quarter polymer was identified by FT-IR. Molecular weight was measured by Gel Pearmeation Chromatograhy. Also, viscosity, solid content and peel strength were investigated. The peel strength was $160g_f/25mm$ when the volume ratio of feed monomer to solvent was 1.3:1 and the ratio was relevant to commercial usage. The pot life of adhesive was 30 s at the 50 m/min of heat treatment rate, and it indicated that the minimum drying time was 30 s. Not only weathering resistance keep up peel strength $160{\sim}180g_f/25mm$ after 1000 h, but also no residual remains.

• Nuclear Engineering and Technology
• /
• v.51 no.4
• /
• pp.1037-1040
• /
• 2019

For the past 50 years, graphite has been widely used as a moderator, reflector and fuel matrix in different kinds of gas-cooled reactors. Resulting in approximately 250,000 metric tons of irradiated graphite waste. One of the most significant long-lived radioisotope from graphite reactors is carbon-14 ($^{14}C$) with a half-life of 5730 years, this makes it a huge concern for deep geologic disposal of nuclear graphite (NG). Considering the lifecycle of NG a number of waste management options have been developed, mainly focused on the achievement the radiological requirements for disposal. The existing approaches for recycling depend on the cost to be economically viable. In this new study, an affordable process to remove $^{14}C$ has been proposed using samples taken from the Nuclear Power Plant in Latina (Italy) which have been used to investigate the capability of organic and inorganic solvents in removing $^{14}C$ from exfoliated nuclear graphite, with the aim to design a practicable approach to obtain graphite for recycling or/and safety disposed as L& LLW.

• Resources Recycling
• /
• v.33 no.1
• /
• pp.31-36
• /
• 2024

The separation of Ag and Zn from the nitrate leachate of spent silver oxide batteries using Cyanex272 as an extractant was investigated. The extraction of Ag and Zn was affected by the concentrations of nitric acid and the extractant. Cyanex-272 selectively extracted Zn over Ag when the HNO₃ concentration was lower than 0.1 mol/L. The co-extracted Ag was removed by stripping with 1 mol/L thiourea. Stripping of Zn from the loaded Cyanex-272 was accomplished using 0.5 mol/L HNO₃ after the removal of Ag. The McCabe-Thiele diagrams for the extraction of Zn with Cyanex-272, the scrubbing tripping of Ag with thiourea, and the stripping of Zn with HNO₃ were constructed. The results were verified by simulated counter-current extraction and stripping experiments. Finally, a process for the separation of Ag and Zn from silver oxide batteries was proposed.

• Journal of Korean Society on Water Environment
• /
• v.40 no.1
• /
• pp.36-46
• /
• 2024

Microplastics in water resources have been recognized as a serious problem. The discharge of microplastics from wastewater treatment plants is considered a major contributor to environmental pollution in water resources. However, a reliable analytical method for quantifying microplastics in wastewater treatment plants has not yet been established. This study proposes a reliable, quick, and easy analytical method for quantifying microplastics. For the removal of organic particles, preprocessing steps were applied including oxidation, sonication, washing, and sieving. Nile Red staining was used to visualize microplastics, and quantitative analysis was conducted using fluorescent imaging. The stained microplastics were ultimately quantified through image analysis software. Among the preprocessing steps, sonication and washing stages were particularly effective in efficiently removing interfering substances from wastewater, enhancing the accuracy of the microplastic analysis. Additionally, various solvents (methanol, acetone, and N-hexane) for the Nile Red staining solution were tested. When N-hexane was applied as the solvent, the quantity of stained microplastics was lower compared to methanol and acetone. This suggests that N-hexane has a greater potential of reducing false staining and counting of non-plastic particles. In summary, this research demonstrates a robust method for quantifying microplastics in wastewater treatment plants by employing effective preprocessing steps and optimizing the staining process with Nile Red and N-hexane.

• Journal of Animal Environmental Science
• /
• v.16 no.1
• /
• pp.21-28
• /
• 2010

The odor problem in the livestock is increasing by 7% annually. Most importantly, the livestock odor problem in swinery accounts for the maximum ratio (54%). In this study, we reviewed the possibility of deodorizing swinery using an odor reduction device that can be used with the water washing system. First, the study confirmed that the solubility of odor gas, which was hydrogen sulfide, was very low regardless of the contact time with solvent, but the solubility of methyl mercaptan was found to increase along with the increase in time. The solubility of other odor gases, such as dimethyl sulfide, dimethyl disulfide and ammonia, was considerably high. Consequently, it is considered that if the odor reduction device for the water washing system deodorization is used in a swinery, the time during which the exhaust gas is in contact with usable water must be extended, or solvent quantity must be expanded. However, it is predicted that although hydrogen sulfide is easily generated in the anaerobic condition, it is difficult to expect high odor reduction efficiency because this gas has low solubility in water, especially in case it is used in the deodorization of the water washing system. The result of the solubility experiment using the bench-scale device practically manufactured represented the higher odor reduction ratio than expected. This result was possible because the removal efficiency of dust particles could be reached up to 93%. Therefore, it is judged that also the odor gas absorbed on dust particles could be removed by removal of dust. Consequently, it is expected that the higher order reduction ratio will be possible by structural improvement for increasing contact with water and odor gas.