• Bulletin of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.466-470
• /
• 2014

In this paper, organic solvent electrolytes were prepared by a mixture of propylene carbonate (PC), dimethyl carbonate (DMC), tetraethylammonium tetrafluoroborate ($TEABF_4$)s to evaluate the ionic properties of propylene carbonate (PC)/dimethyl carbonate (DMC) mixtures as solvents for a capacitor application, in view of improving the electrochemical performances. The bulk resistance and interfacial resistance of the mixture electrolytes were investigated using an AC impedance method. The morphology of carbon-based electrodes which were contained in different electrolytes was analyzed by scanning electron microscopy (SEM) method. From the experimental results, by increasing the FEC content, capacitance of electrodes was increased, and the interfacial resistance was decreased. In particular, by a content of 2 vol % FEC in 0.2 M $TEABF_4$ PC/DMC solvent, the electrolyte showed the superior capacitance. However, when FEC content exceeds 2 vol %, the capacitance was decreased and the interfacial resistance was increased.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.04a
• /
• pp.26-27
• /
• 1995

Most of synthetic polymeric membranes used in ultrafiltration, reverse osmosis and microfiltration processes are prepared by phase inversion(or phase separation) technique. In this technique, a homogeneous polymer solution is cast into thin film or hollow fiber shape and then immersed into a nonsolvent coagulant bath. The exchange of solvent and nonsolvent across the interface between casting solution and coagu!ant can make the casting solution phase-separate and form a membrane with a symmetric or asymmetric structure. Because of importance of this technique in membrane field, many investigations have been dedicated to elucidate the mechanism of membrane formation by phase inversion technique.[1-10] These investigation have suggested that the structure formation and permeation properties of phase inversion membrane depend on the variables such as the nature and content of casting solution and coagulant, temperature of casting solution and coagulant, and the diffusional exchange rate of solvent and nonsolvent etc. which can be related to the thermodynamic and kinetic properties of the casting system. The variables such as the nature and content of casting solution can also be the important factor affecting the structure formation and permeation property of the phase inversion membrane.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.18 no.1
• /
• pp.23-28
• /
• 1985

The extraction rate of lipids from the chopped whole fish was studied with various solvents. Factors which can influence on the extraction rate such as temperature, moisture content, agitation speed and solvent were also examined. In the early stage of extraction, it is considered that the rapid extraction was attributed to cell destruction which occurs in chopping the whole fish and in the later stage, the extraction rate was increased linearly with extraction time. The effect of agitation on the extraction rate had a great influence on the early stage of extraction. In agitation speed of 100, 200, 300 and 500 r.p.m. the slopes of extraction curve were -0.075, -0.075, -0.069 and -0.064, respectively. Extractability between hydrophilic and hydrophobic solvent showed a great difference. It is suggested that extractability difference between acetone and isopropyl alcohol is due to acetone property which can not extract phospholipids in polar lipids. Extractability of lipids was increased with increasing temperature and decreased with increasing moisture content.

• Fisheries and Aquatic Sciences
• /
• v.13 no.1
• /
• pp.18-25
• /
• 2010

Interest in plant-derived food additives has increased recently, with efforts to identify natural antioxidant sources to replace synthetic antioxidants. This study evaluated the antioxidant effects of organic solvent fractions of 80% methanol extracts from Pediastrum duplex and Dactylococcopsis fascicularis microalgae. Among the solvent fractions tested, the ethyl acetate and n-hexane fractions from P duplex effectively scavenged 79.8% and 74.5% of DPPH free radicals, respectively. The chloroform fraction from D. fascicularis showed the strongest $H_2O_2$ scavenging ability (49.7%). The greatest scavenging of hydroxyl radicals (73.1%) was exhibited by the 80% methanol extract from P duplex. Aqueous residue and ethyl acetate fraction from P duplex provided the strongest nitric oxide scavenging (57.7%) and metal chelating effect (82.1%), respectively. Chloroform and ethyl acetate fractions from P duplex and n-hexane fraction from D. fascicularis exhibited significantly greater inhibition of lipid peroxidation than the commercial antioxidants. These results suggested that P duplex and D. fascicularis microalgae having potential anti oxidative compounds with various properties could be utilized in the food and pharmaceutical industries.

• YAKHAK HOEJI
• /
• v.32 no.1
• /
• pp.86-94
• /
• 1988

Some rheological properties of subfractions for dextran in the molecular weights range from $3{\times}10^4$ to $2{\times}10^6$ was investigated at room temperature. The dependence of the viscosity on concentration, shear rate, pH & ionic strength, temperature and solvent effect was observed. From the experimental data the Mark-Houwink viscosity equation in water at $25^{\circ}C$ was determined for samples having the molecular weight ranging from $3{\times}10^4$ to $2{\times}10^6$ as$[{\eta}]=3.1{\times}10^{-3}\;Mw^{0.39}(in\;dl/g)$. The intrinsic stiffness of the dextran backbone was estimated by evaluating the 'characteristic ratio' $C_{\infty}$, which is below the 0.082. In the concentrated region, the viscosity was decreased with increasing shear rate and was exponentially decreased with raising temperature, the viscosity showed the maximum value at neutral condition. From the experimental data, it was concluded that dextran chain, linked by the ${\alpha}-1$, 6-glucosidic linkage, behaves like a flexible random coil chain in aqueous solution, dextran solutions were pseudoplastic power law fluids among the empirical models of non-Newtonian behavior. Urea was an active reagent which increases the viscosity and swells dextran while pyrididine and glycerol were inactive reagents. Also, it could be estimated that the formation of gel structure is promote to the neutral state, the molecular weight larger than $2{\times}10^5$, when electrolytic concentration is IN and Ureas is use to solvent.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.2
• /
• pp.441-444
• /
• 2009

The formation and structure of self-assembled monolayers (SAMs) by the adsorption of acetyl-protected octylthioacetate (OTA) on Au(111) in a catalytic tetrabutylammonium cyanide (TBACN) solution were examined by means of scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), and cyclic voltammetry (CV). Molecular-scale STM imaging revealed that OTA molecules on Au(111) in a pure solvent form disordered SAMs, whereas they form well-ordered SAMs showing a c(4 × 2) structure in a catalytic TBACN solution. XPS and CV measurements also revealed that OTA SAMs on Au(111) formed in a TBACN solution have a stronger chemisorbed peak in the S 2p region at 162 eV and a higher blocking effect compared to OTA SAMs formed in a pure solvent. In this study, we clearly demonstrate that TBACN can be used as an effective deprotecting reagent for obtaining well-ordered SAMs of thioacetyl-protected molecules on gold.

• Journal of Adhesion and Interface
• /
• v.12 no.1
• /
• pp.11-15
• /
• 2011

In this study we synthesized low VOC-solvent soluble thermo plastic polyurethane, The effect of chain extender and NCO/OH ratio for properties of thermoplastic polyurethane was investigated. Also, we prepared low VOC-type primer by TPU and acrylic modified tackifier resin. When NCO/OH ratio was 2 or more, TPU was insoluble in low VOC solvent. And peel strength was higher value using polar type tackifier than non-ploar type tackifier.

• Journal of Preventive Medicine and Public Health
• /
• v.27 no.3 s.47
• /
• pp.557-567
• /
• 1994

This study was conducted to examine the effect of chronic low dose organic solvent exposures in the industries towards then neurobehavioral functions of workers. Subjective symptoms on neurobehavioral function as well as a visual reaction time test (Flicker test) were administered to 94 exposed and 162 unexposed workers in a oil refinery and some other auto-repair shops. The results obtained were as follows : 1. Symptom complaints were higher and Flicker test values were lower in exposed workers than in unexposed workers. 2. Flicker valus were Inversely correlated with urinary Hippuric acid concentration in exposed workers(r=-0.26, p<0.05). 3. Flicker valus were inversely co..elated with Subjective symptom score(r=-0.15, p<0.05). Low Flicker value were also related with some subjetive symptoms such as 'Dimmed vision', 'Nightmare', 'Weakness on extrimity' in workers as a whole. While symptoms of 'Dimmed vision ', 'Nightmare' only observed among exposed workers.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.2
• /
• pp.1-12
• /
• 2012

In this experiment, we have manufactured thermal-curable silver pastes for direct printing. And to enhance conductivity, printability, adhesion and hardness during polymer direct-gravure prints, we have manufactured Ag pastes by adding variety of filter contents. Then we have investigated characteristics of rheology in paste according to the gravure printability and the properties of printed conductive patterns. Depending on a variety of Ag powder, there was a big difference in sharpness of printed pattern. And also by the use of carbon, there was a big difference in amount of solvent used, conductivity and in hardness. We could improve doctoring and the sharpness of a pattern by adding Ag paste in carbon particle, but as we have used nano-sized particle, there was an increase in the amount of solvent used and also we have found out that it gives a bad effect as adhesive and hardness becomes weaker. Even though Ag particle has the same spherical shape, the surface treatments could differ from one another. And by the appropriate choice and with the suitable combination of Ag powder, excellent printability and conductivity could be obtained.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.97-100
• /
• 2004

In this paper, the preparation of BSCCO superconducting wire by electrophoretic deposition method and the effect of suspension medium used with various solvent solutions of ethanol and buthanol for electrophoretic deposition were studied. The preheating technique in vacuum system for the superconducting powders coated on Ag wire was also investigated. As a result, it was confirmed that the preheating technique was very useful to remove the influence of remains affected to the surface conditions of superconducting wire. And the adsorbed solvent solution which was existed between and on the deposited particle surfaces was almost disappeared at the treating conditions of about $10^{-3}$ Torr and around $200^{\circ}C$ in bell-jar system. By measurement of 4-point prove method, the critical current density($J_c$) of BSCCO superconducting wire was obtained at the value of more than $10^4\;A/cm^2$ in liquid $N_2$(77 K, 0 T).