• 공업화학
• /
• 제16권4호
• /
• pp.507-512
• /
• 2005

리튬 이온 2차 전지의 부극으로 사용되는 탄소전극은 초기 충전시 전극 표면에 Solid Electrolyte Interphase (SEI)라고 불리는 부동태 피막을 형성한다. 초기 충전과정에서의 용매분해로 형성된 막은 충방전 용량에 큰 영향을 주는 것으로 조사되었다. 본 연구에서는 Kawasaki Mesophase Fine Carbon 부극과 1 M $LiPF_6,EC:DEC$ (1:1, 부피비)에 $Li_2CO_3$를 첨가하여 전극/전해질 계면에서 초기충전 온도에 따라 형성되는 부동태 피막의 전기화학적 특성을 시간대 전압법, 순환 전압-전류법, 임피던스법을 이용하여 조사하였다. 관찰된 결과에 따르면, 용매분해 반응이 일어날 때 리튬 이온의 전도도에 따라 용매분해 전위가 달라졌으며, 저온으로 갈수록 $Li^+$ 이온의 전도성이 떨어져 분해 전위 차이가 나타남을 알았다. 또한 여러 온도조건에서 초기 충전시 형성된 피막의 저항은 온도별로 달라짐을 확인하였다.

• International Journal of Safety
• /
• 제2권1호
• /
• pp.28-33
• /
• 2003

Thermal decomposition characteristics of ethyl methacrylate (EMA) and Styrene (St.) copolymer was investigated with synthesis at 8$0^{\circ}C$ in a continuous stirred tank reacto (CSTR) using toluene and benzoyl peroxide(BPO) as solvent and initiator, respectively. The thermal decomposition was considered to be side scission at below 30$0^{\circ}C$ and estimated 2nd-order reaction kinetics of EMA/St. copolymer. The activation energies of decomposition on this copolymers were in the ranges of 38-43 kcal/mol for EMA/St. and a good additivity rule was observed in each composition. The thermogravimetric trace curves agreed well with the theoretical calculation.

• 한국자기공명학회논문지
• /
• 제4권2호
• /
• pp.116-124
• /
• 2000

Singular value decomposition (SVD) has been used during past few decades in the advanced NMR data processing and in many applicable areas. A new modified SVD, piecewise polynomial truncated SVD (PPTSVD) was developed far the large solvent peak suppression and noise elimination in U signal processing. PPTSVD consists of two algorithms of truncated SVD (TSVD) and L$_1$ problems. In TSVD, some unwanted large solvent peaks and noises are suppressed with a certain son threshold value while signal and noise in raw data are resolved and eliminated out in L$_1$ problem routine. The advantage of the current PPTSVD method compared to many SVD methods is to give the better S/N ratio in spectrum, and less time consuming job that can be applicable to multidimensional NMR data processing.

• 한국수소및신에너지학회논문집
• /
• 제28권1호
• /
• pp.70-76
• /
• 2017

To synthesize copper nanoparticle a thermal decomposition was adopted. And to solve the problem of surface oxidation of the synthesized copper powder an electroless Ag plating method was used. The size and shape of synthesized Cu nanoparticle were affected by the size of copper oxalate used as a precursor, reaction solvent, reaction temperature and amount of reducing agent. Especially reaction solvent is dominant factor to control shape of Cu nano-particle which can have the shapes of sphere, polygon and rod. In case of glycerol, it produced spherical shape of about 500 nm in size. Poly ethylene produced uniform polygonal shape in about 700 nm and ethylene glycol produced both of polygon and rod having size range between 500 and 1500 nm. The silver coated copper powder showed a high electrical conductivity.

• Bulletin of the Korean Chemical Society
• /
• 제16권3호
• /
• pp.269-277
• /
• 1995

A topological theory has been introduced to extend the theory of Balsara and Nauman to evaluate the entropy of in homogeneous polymer solutions. Previous theories have considered only the terms about the displacement of junction points, while the present theory has obtained a more complete expression for the entropy by adding the topological interaction terms between strands. There have been predicted the characteristics of the spinodal decomposition and the interfacial tension of polymer solutions from the resultant expression. It is exposed that the theoretically predictive values show good agreement with the experimental data for polymer solutions.

• 한국응용과학기술학회지
• /
• 제19권4호
• /
• pp.273-280
• /
• 2002

Thermal decomposition of the copolymer of butyl methacylate(BMA) with styrene(St) was investigated. The copolymer Was obtained at 80 $^{\circ}C$ in a continuous stirred tank reactor(CSTR) using toluene and benzoyl peroxide(BPO), as solvent and initiator, respectively. The reactor volume was 0.3 liters and residence time was 3 hours. The thermal decomposition followed the second order kinetics for BMA/St copolymer. The activation energies of thermal decompositon were in the ranges of 38 ${\sim}43$ kcal/mol for BMA with St copolymer and a good additivity rule was observed with the composition of copolymer. The thermogravimetric trace curve agreed well with the theoretical calculation.

• 한국수소및신에너지학회논문집
• /
• 제25권3호
• /
• pp.305-310
• /
• 2014

This study examined the morphological changes in lithium surface immersed in 1mol $dm^{-3}$ (M) $LiPF_6 $ dissolved in propylene carbonate (PC) containing different 1,2-dimethoxyethane (DME) concentrations as a co-solvent. A passivation film was formed on the surface of lithium metal by electrolyte decomposition. The passivation film formation reactions were significantly affected by the amount of co-solvent, DME, in electrolyte solution. A stable film was obtained from the 1 M $LiPF_6 $ / PC:DME (67:33) solution in which lithium electrode showed good electrochemical performances. Atomic force microscope (AFM) and electrochemical impedance spectroscopy (EIS) results revealed that there were no direct correlations between changes in the surface morphology of lithium metal and the resistance behavior of its passivation film.

• 공업화학
• /
• 제17권2호
• /
• pp.183-187
• /
• 2006

리튬-이온 전지에서 전해질 용액에 대한 용매의 선택은 충방전 특성의 개선을 위해 매우 중요하다. 여러 가지 용매 시스템이 리튬-이온 전지의 전해질로서 광범위하게 연구 되어졌다. 본 연구는 다양한 혼합비에서 제조한 1 M $LiPF_6/EC$ (ethylene carbonate) : MA (methyl acetate) (x:y) 전해질 용액의 용매 분해 전위와 카본 부극 표면에 형성된 Solid Electrolyte Interphase 피막의 전기화학적 성질을 시간대 전위법, 순환 전압- 전류법, 임피던스법을 이용하여 관찰하였다. 용매분해 전위는 전해질의 이온 전도도에 따라 전위가 달라졌고, 용매의 혼합비에 따라 피막의 전기화학적 특성이 변화되었음을 확인하였다. 결과적으로, 1 M $LiPF_6/(EC+MA)$ 시스템에서 가장 적절한 EC와 MA의 혼합비는 대략 1:3 (EC:MA, 부피비)이었다.

• 한국안전학회지
• /
• 제11권4호
• /
• pp.79-83
• /
• 1996

In this study, in attempt to develop a new application technique of discharge plasma, we employed a kind of discharging method called SPCP ( short for Surface discharge induced Plasma Chemical Process). Applications of SPCP have been widely used for years. Compact ozonizers to deodorize household equipments like refrigerators we a part of such applications. We took advantages of the compactness and durability of the SPCP electrode to set up an experimental apparatus for decompositing vapor of aromatic hydrocarbons such as toluene, benzene and xylenes, which are major substances given off In painting or washing processes and aggravate working conditions. Results obtained from this study are summarized as follows. 1) Aromatic hydrocarbon vapors of up to 2,000ppm were almost thoroughly decomposed at the flow rate of 4ℓ/min or lower under the discharge with electric power of 400 Watts. 2) In dry air, as the decomposition progresses, tar-like substance deposits on the discharging areas, which deteriorated the decomposition rate in the end. This substance, however, was almost thoroughly removed by keeping discharge in dry air containing no solvent vapor.

• Bulletin of the Korean Chemical Society
• /
• 제14권1호
• /
• pp.38-42
• /
• 1993

Factor analysis was applied to study the thermal decomposition of barium titanyl oxalate (BTO) which is used as the precursor of barium titanate. BTO was synthesized in $H_2O$ solvent and calcined at various temperatures. The X-ray diffraction patterns were obtained to make the data matrix of peak intensity vs. 2${\theta}$. Abstract factor analysis and target transformation factor analysis were applied to this data matrix. It has been found that the synthesized BTO consists of the crystals of $BaC_2O_4{\cdot}0.5H_2O\;and\;BaC_2O_4{\cdot}2H_2O$ as well as the amorphous solid of TiO-oxalate. The results also indicate that the BTO was transformed via $BaCO_3\;to\;BaTiO_3\;and\;Ba_2TiO_4$ during the thermal decomposition.