• Bulletin of the Korean Chemical Society
• /
• v.18 no.3
• /
• pp.318-323
• /
• 1997

ο-(2-Vinyloxyethoxy)benzylidenemalononitrile (3a) and methyl ο-(2-vinyloxyethoxy)-benzylidenecyanoacetate (3b), m-(2-vinyloxyethoxy)benzylidenemalononitrile (4a), and methyl m-(2-vinyloxyethoxy)benzylidenecyanoacetate (4b) were prepared by the condensation of ο-(2-vinyloxyethoxy)benzaldehyde (1) and m-(2-vinyloxyethoxy)benzaldehyde (2) with malononitrile or methyl cyanoacetate, respectively. Bifunctional vinyl ether monomers 3a and 3b polymerized quantitatively with radical initiators in γ-butyrolactone solution at 65 ℃, while meta-isomers 4a and 4b gave lower yields of polymers under the same conditions. The polymers 5-6 obtained from the monomers 3-4 were insoluble in common solvents due to cross-linking. Under the same polymerization conditions ethyl vinyl ether polymerized well with model compounds ο-methoxybenzylidenemalononitrile 7a, methyl ο-methoxybenzylidenecyanoacetate 7b, m-methoxybenzylidenemalononitrile 8a, and methyl m-methoxybenzylidenecyanoacetate 8b, respectively, to give 1:1 alternating copolymers 9-10 in high yields. Cross-linked polymers 5-6 showed a thermal stability up to 300 ℃, and showed a double phase degradation pattern in their TGA thermograms. Polymers 5-6 showed broad endothermic bands around 75-110 ℃ without any characteristic Tg peaks in DSC thermograms. Alternating copolymers 9-10, except copolymer 9b were soluble in common organic solvents. The inherent viscosities of polymer 9-10 were in the range of 0.35-0.62 dL/g. Polymer films cast from acetone solution were cloudy and tough and Tg values obtained from DSC thermograms were in the range of 118-165 ℃.

• Journal of Integrative Natural Science
• /
• v.6 no.4
• /
• pp.211-214
• /
• 2013

In this study, in order to investigate how consecutive treatments of glass surface with HF acid and water vapor/Ar plasma affect the quality of 3-aminopropyltriethoxysilane self-assembled monolayer (APS-SAM), poly(3,4-ethylenedioxythiophene) (PEDOT) thin films were vapor phase-polymerized immediately after spin coating of FeCl3 and poly-urethane diol-mixed oxidant solution on the monolayer surfaces prepared at various treatment conditions. For the film characterization, various poweful tools were used, e.g., FE-SEM, an optical microscope, four point probe, and a contact angle analyzer. The characterization revealed that HF treatment is not desirable for the synthesis of a high quality PEDOT thin film via vapor phase polymerization method. Rather, sole treatment with plasma noticeably improved the quality of APS-SAM on glass surface. As a result, a highly dense and smooth PEDOT thin film was grown on uniform oxidant film-coated APS monolayer surface.

• Textile Coloration and Finishing
• /
• v.15 no.3
• /
• pp.127-131
• /
• 2003

Acrylonitrile(AN) was solution-polymerized in dimethyl sulfoxide(DMSO) and tertiary butyl alcohol(TBA) at 30, 40, $50^\circ{C}$ using a low temperature initiator, 2,2'-azobis(2,4-dimethylvaleronitrile) (ADMVN). The low temperature polymerization using ADMVN, DMSO, and TBA is to be successful in obtaining high molecular weight polyacrylonitrile(PAN) with less branches by solution polymerization. Throug a polymerization of AN in DMSO at $30^\circ{C}$, PAN having viscosity-average molecular weight$(M_v)$ of 931,000 was obtained. And then, during AN solution polymerization in DMSO and TBA using a cosolvent system the in-situ formation of microfibrillar structure has been discovered at the cosolvent composition of 24/1$(V_{DMSO}/V_{TBA})$. The simultaneous process of gelation and phase separation of long chain molecules may explain the in-situ formation of PAN fibers during polymerization.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.141-142
• /
• 2020

In this study, the performance evaluation was performed by adding a polymer aqueous solution as a new additive of the red clay binder for use in the rammed earth construction method. The evaluation items were compressive strength and microstructure analysis. As a result of the experiment, the performance of the red clay binder was improved by efficiently bonding the silica particles by the polymerized polymer.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.123-124
• /
• 2006

Ionic liquids (ILs) are collecting keen interests as an advanced substituent of electrolyte solution as well as novel solvents. In the present talk, I will introduce some strategies to fix IL structure on polymer chains to prepare polar polymers with low glass transition temperature. Namely, cationic, anionic, and zwitterionic monomers have been prepared, and they have been homopolymerized or copolymerized to prepare polymer electrolytes with different properties. The polymers themselves showed very poor ionic conductivity, but it was improved by suitable spacer between charged site and main chain. Other unique characteristics of functional ILs and new polymerized ionic liquids will also be mentioned.

• Elastomers and Composites
• /
• v.27 no.4
• /
• pp.262-266
• /
• 1992

A number of tin-containing elastomers are produced commercially by Korea Kumho Petrochemical Co., Ltd. (KKPC) under the Kosyn Sol tradename. The effect of mastication of commercial and laboratory polymerized S-SBR has, been investigated using chemical mixer(ML-500), NMR, GPC and Mooney viscometer. Mastication of polymers containings coupling bonds is affected by the amount of stearic acid, the temperature of mixing and the time length of mixing.

• Applied Chemistry for Engineering
• /
• v.10 no.5
• /
• pp.784-788
• /
• 1999

In this work, we analyzed the viscoelastic characteristics of electrochemically polymerized polypyrrole(PPy) thin film in various electrolyte solutions, $Na_2SO_4,\;Na_2CO_3$ and SDS + $NaClO_4$, using QCA. The characteristics of redox reaction of electrochemically polymerized PPy thin film for 180 sec in each electrolyte, was investigated in 0.1 M $NaClO_4$ electrolyte solution by cyclic voltammetry method. We used one side of quartz crystal electrode as a working electrode and measured the resonant frequency, resonant resistance and current as analytical parameters. As the results, we suggest that electrochemically polymerized PPy thin film in various electrolyte solutions shows tendency changing from elastic characteristics to viscoelastic one in the order of $ClO_4{^{-}}\;+\;DS^-,\;SO_4{^{-2}}$ and $CO_3{^{-2}}$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.5
• /
• pp.229-233
• /
• 2002

Nano-sized ZnO particles were successfully synthesized at low temperatures by a polymerized complex method via an organochemical route. The polymeric precursors could be prepared using Zn nitrate hexahydrate and a mixed solution of citric acid and ethylene glycol as a chelating agent and a reaction medium. The polymeric precursors were calcined at temperatures from 300 to $700^{\circ}C$ for 3 h, and evaluated for degree of crystallization process, thermal decomposition, surface morphology and crystallite size. The thermal decomposition and crystallization process were analyzed by TG-DTA, FI-IR and XRD. The morphology and crystallite size of the calcined particles were evaluated by scanning electron microscopy (SEM), transmittance electron microscopy (TEM) and Scherrer's equation. Crystallization of the ZnO particles was detected at $300^{\circ}C$ and entirely completed above $400^{\circ}C$. Particles calcined between 400 and $700^{\circ}C$ showed a uniform size distribution with a round shape. The average particle sizes calcined at $400^{\circ}C$ for 3 hour were 30~40nm showing an ordinary tendency to increase with the temperatures.

• Korean Journal of Materials Research
• /
• v.28 no.8
• /
• pp.452-458
• /
• 2018

This research is conducted to create a functional hydrogel ophthalmic lens containing nanoparticles. Carbon nanoparticles and PEGMEMA are used as additives for the basic combination of HEMA, MA, and MMA, and the materials are copolymerized with EGDMA as the cross-linking agent and AIBN as the thermal initiator. The hydrogel lens is produced using a cast-mold method, and the materials are thermally polymerized at $100^{\circ}C$ for an hour. The polymerized lens sample is hydrated in a 0.9 % saline solution for 24 hours before the optical and physical characteristics of the lens are measured. The refractive index, water content, contact angle, light transmittance, and tensile strength are measured to evaluate the physical and optical characteristics of the hydrogel lens. The refractive index, water content, contact angle, UV-B light transmittance, UV-A light transmittance, visible light transmittance, tensile strength and breaking strength of the hydrogel lens polymer are 1.4019~1.4281, 43.05~51.18 %, $31.95{\sim}68.61^{\circ}$, 21.69~58.11 %, 35.59~84.26 %, 45.85~88.06 %, 0.1075~0.1649 kgf and 0.1520~0.2250 kgf, respectively. The results demonstrate an increase in refractive index, tensile strength and breaking strength and a decrease in contact angle and light transmittance. Furthermore, the visible light transmissibility is significantly increased at PEG 10 %. It is clear that this material can be used for high-performance ophthalmic lenses with wettability, ultraviolet ray blocking effect, and tensile strength.

• Journal of Integrative Natural Science
• /
• v.4 no.4
• /
• pp.311-314
• /
• 2011

Application of self-assembled monolayers (SAMs) to the fabrication of organic thin film transistor has been recently reported very often since it can help to provide ohmic contact between films as well as to form simple and effective electrode pattern. Accordingly, quality of these ultra-thin films is becoming more imperative. In this study, in order to manufacture a high quality SAM pattern, a hydrophobic alkylsilane monolayer and a hydrophilic aminosilane monolayer were selectively coated on $SiO_2$ surface through the consecutive procedures of a micro-contact printing (${\mu}CP$) and dip-coating methods under extremely dry condition. On a SAM pattern cleaned with SC1 solution immediately after ${\mu}CP$, poly(3,4-ethylenedioxythiophene) (PEDOT) source and drain electrode array were very selectively and nicely vapour phase polymerized. On the other side, on a SC1-untreated SAM pattern, PEDOT array was very poorly polymerized. It strongly suggests that the SC1 cleaning process effectively removes unwanted contaminants on SAM pattern, thereby resulting in very selective growth of PEDOT electrode pattern.