• Journal of applied mathematics & informatics
• /
• v.26 no.1_2
• /
• pp.161-176
• /
• 2008

The effect of variable viscosity on MHD mixed convection Hiemenz flow over a thermally stratified porous wedge plate has been studied in the presence of suction or injection. The wall of the wedge is embedded in a uniform Darcian porous medium in order to allow for possible fluid wall suction or injection and has a power-law variation of the wall temperature. An approximate numerical solution for the steady laminar boundary-layer flow over a wall of the wedge in the presence of thermal diffusion has been obtained by solving the governing equations using numerical technique. The fluid is assumed to be viscous and incompressible. Numerical calculations are carried out for different values of dimensionless parameters and an analysis of the results obtained shows that the flow field is influenced appreciably by the magnetic effect, variable viscosity, thermal stratification and suction / injection at wall surface. Effects of these major parameters on the transport behaviors are investigated methodically and typical results are illustrated to reveal the tendency of the solutions. Comparisons with previously published works are performed and excellent agreement between the results is obtained.

• Journal of Magnetics
• /
• v.20 no.4
• /
• pp.371-376
• /
• 2015

Magnetite nanoparticles were synthesized by adding excess ammonium hydroxide to a solution of iron (II) and (III) chlorides. The surfactants of oleic acid and Span 80 were applied in sequence to the magnetic particles as a combined stabilizer, and poly-${\alpha}$-olefin (PAO) 30 or 60 was used as the liquid base with a low or high viscosity, respectively. The ferrofluids were prepared with the concentrations of 200, 300, 400, and 500 mg/mL, and characterized by density, dispersion, magnetization, and viscosity. The density of the fluids increased proportionally to the concentration from 0.98 to 1.27 g/mL and 1.01 to 1.30 g/mL with PAO 30 base and PAO 60 base, and the dispersion stability was 77-95 and 81-74% for the PAO-30 and PAO-60-based fluids, respectively. The observed saturation magnetization values of the PAO-30 and PAO-60-based ferrofluids were 16 to 42 mT and 17 to 41 mT with the concentration increase in the range 200-500 mg/mL, respectively, depending upon the content of magnetic particles in the fluid. The viscosity variation of the PAO-30 and PAO-60-based ferrofluids in the temperature range $20-80^{\circ}C$ was the least with the concentrations of 400 and 300 mg/mL, respectively.

• Journal of Korea Foundry Society
• /
• v.30 no.6
• /
• pp.241-246
• /
• 2010

The viscosity of foam metal is necessary to get the pores, but it is difficult to manufacture net-shape foam, because the fluidity decreases by increasing viscosity. In this study, the A356 alloy which has good fluidity and less defect was selected and fabricated to foam metal. To understand about effect of thickening agent on foaming and mechanical properties, quantity of thickening agent was changed. The pore size, porosity and distribution of foam metal were measured by i-solution program. And compression test were performed by UTM. In case of 3.0wt% Ca in thickening agent, it is found that most of foam consist of homogeneous shape, and the growth height had the highest value of 204 mm in the all fabricated foams. The porosity was 93% and compressive strength was 3.1 MPa. In the microstructure, the $Al_2Si_2Ca$ intermetallic compound and Ti were observed. The vickers hardness value rose with increasing viscosity value.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.177-182
• /
• 2009

We present the geminate rebinding kinetics measurements of CO to 2-methylimidazole (2-MeIm) bound ferrous protoporphyrin- IX (FePPIX) in alkaline glycerol/water mixtures at 293 K after photolysis. The kinetics was probed by monitoring the CO stretching mode using femtosecond vibrational spectroscopy. When 2-MeIm is used in excess, heme dimers that typically form in low viscosity solutions disappear as the viscosity of the solvent increases. Heme aggregates formed in low viscosity solutions turn monomeric as more 2-MeIm is added, suggesting that 6-coordinated heme, including a strong proximal histidine tends to be in the monomeric form. The vibrational band of CO in the 2-MeIM-FePPIX-CO is well described by a single Gaussian function centered at 1958 $cm^-1$ and 28 $cm^-1$ full width at half maximum. The efficiency and rate of the geminate rebinding of CO to the heme increase with viscosity of the solvent, suggesting that retention of the dissociated CO near the heme, for a longer period by the viscous solvent media, accelerates rebinding.

• Journal of the Korean Ceramic Society
• /
• v.36 no.9
• /
• pp.991-996
• /
• 1999

Effect of solution property on the weight varation and microstructural change of film was studied by electrophoretic deposition in order to obtain a homogeneous and dense zirconia film. As a result of weight kinetics of film which obtained in alcohol or aqueous solution having different polarity experimental data showed large deviation from theoretical ones calculated by Zhang's kinetic model. It had been shown that the weight affecting factors was largely dependent on properties other than dielectric constant and viscosity of solvent zeta potential appiled field and time. In initial stage a main factor of the drastic weight increase was the capillary drag of porous substrate. The cause of weight decrease with time in aqueous solution after 300 s was attributed to the defect of film by sagging and electrolytic reaction. The electrolyte film which prepared in alcohol solution with good wetting for substrate had better homogeneous and dense microstructure than one in aqueous solution with high surface tension.

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.57-62
• /
• 2004

In the current study the effects on pump performances of a conventional centrifugal pump for Newtonian and non-Newtonian fluid were experimentally studied. The study aimed to compare the pump characteristics for Newtonian and non-Newtonian fluid. The working fluids are water, aqueous sugar solution, glycerin solution, muddy solution and pulp solution. The pump characteristics with high viscosity fluids were different. The operating efficiency for the sugar and glycerin solutions were decreased to $8.1\%$ and $12.9\%$ than that of water. The head reductions of the muddy solution for different concentration ratios were decreased to $7.97\%,\;15.11\%$ and $24.87\%$ than that of water And the head reductions of the pulp solution for different concentration ratios were decreased to $11.87\%,\;19.79\%$ md $36.81\%$ than that of water.

• Bulletin of the Korean Chemical Society
• /
• v.2 no.3
• /
• pp.90-96
• /
• 1981

The significant structure theory of liquids has been successfully applied to the sodium ammonia solution. In applying the theory to sodium ammonia solution, we assumed there were four species in solution, i.e., sodium cation, solvated electron, triple ion, and free electron and equilibria existed between them. Based on these assumptions, we set up the model explaining the anomalous properties of sodium ammonia solution. The partition function for sodium ammonia solution is composed of the partition functions for the above four species and also for the Debye-Huckel excess free energy term. Agreements between calculated and experimental values of the thermodynamic quantities, such as molar volume, vapor pressure, partial molar enthalpy and entropy, and chemical potential as well as viscosity are quite satisfactory.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.35 no.3
• /
• pp.146-152
• /
• 2009

Traditional surgical method or injection using filler is performed for soft tissue augmentation. Surgical methods have disadvantage of surgical morbidity. Commercially available injectable materials have the disadvantages such as resorption, short-term effect. repeated application and hypersensitivity. Significant shortcoming of cell therapy using autologous fibroblasts is delay of treatment effect. Chitosan/${\beta}$-glycerol phosphate (GP) solution has thermosensitive property and allows sol-gel transition at physiologic pH and temperature. These properties may resolve the delay of treatment effect. The purposes of this study are to evaluate the viscosity and pH changes of chitosan/${\beta}$-GP solutions and to evaluate the effect of chitosan/${\beta}$-GP solution on fibroblast proliferation and production of collagen. We measured the viscosity and pH as function of temperature, of the solution containing 1:0.7, 1:0.75, 1:0.8 chitosan (1, 10, 100, 700 kDa) /${\beta}$-GP. Fibroblasts from ears of 5 rats were cultured in chitosan/${\beta}$-GP solutions for 3 weeks. Cell proliferation and collagen contents were measured every week with WST (water-soluble tetrazolium salt) assay and Collagen assay respectively. The Results are 1) Chitosan(100 kDa<)/${\beta}$-GP solution (1:0.75) showed sol-gel transition at physiologic pH and body temperature and injectable properties. It will enable to resolve the delay in treatment effect 2) Cell proliferation and total collagen contents of the control group were increased with time. However, these decreased after the 1st week in experimental group 3) Collagen contents in the experimental group are higher than that of control group. Chitosan/${\beta}$-GP solution may provide favorable conditions for cell function

• Textile Coloration and Finishing
• /
• v.29 no.3
• /
• pp.122-130
• /
• 2017

In the direct digital textile printing process, the pre-treatment process is an essential condition for products by forming a clear pattern by sticking and penetration of DTP dye without spreading on the fabric. Recently, pre-treatment agent is changing from high viscosity to low viscosity in order to reduce defects of fabric during pre-treatment process. In this study, pre-treatment agent of acrylic polymer with low viscosity(less than 50cps) was prepared according to the solid content of the polymer, pre-treated on the cotton fabric, and direct DTP printing was performed to compare the color and sharpness. As a result, it showed high color at a viscosity of 50cps or less. When the solid content of the polyacrylic acid having a high molecular weight(A1) was 2.5wt%, when the solid content of the polyacrylic acid having a low molecular weight(A2) was 1 - 1.5wt%, the color was the best. And when the solid content of A1 and A2 was 1.5wt%, the degree of spreading was small and A1 was superior to A2 at the sharpness.

• Korean journal of food and cookery science
• /
• v.32 no.3
• /
• pp.253-260
• /
• 2016

Purpose: To develop fat-free dressing containing a resistant starch (RS) as a dietary fiber, the viscosity and stability of various type RSes prepared from wheat, maize, potato, rice, waxy rice, and amaranth starches were investigated by using Brookfield viscometer. The shape of RS granule in the dressing during storage was also observed. Methods: The viscosity of fat free dressing with different retrograded RS3 (RS3V) prepared from waxy rice starch with 0.1% lemon vinegar and ascorbate mixed solution had higher RS3 that was maintained constant during storage. Annealing and heating prior to cross-linking, and heating after cross-linking increased RS level of RS4 type starches. Results: The viscosities and stabilities of dressings with RS were different depending on starch sources and RS preparation conditions. The heated RS4 (HRS4) increased in viscosity and stability with RS4 addition. Especially the fat-free dressings with HRS4 prepared from rice and waxy rice starches maintained stability regardless of separation after one month storage with only 7% separation after 6 month storages. The shape of RS4 granule in acidic medium of dressing did not change until 6 months. Conclusion: In this study, RS4 made by the rice and waxy rice starches showed high viscosity and maintained stability of the fat-free dressings during storage.