• 한국해양공학회지
• /
• 제2권2호
• /
• pp.78-86
• /
• 1988

In order to investigate the corrosion pit occurrence and growth characteristic of M.E.F.(martensite encapsulated islands of ferrite) dual phase steel was made with a suitable heat treatment of raw material(SS41), a corrosion fatigue test was performed under rotary bending in the salt solution having a concentration from 0.01 wt percent to 3.5 wt percent. The fatigue strength of dual phase steel was remarkably decreased with an increase in concentration of salt solution; approximately from 63% to 80% in case of dual phase steel and from 40% to 71% in case of raw material. Corrosion pit occurred in the martensite phase and fatigue cracks from corrosion pits were selectively propagated in martensite phases. In the observation of corrosion pits at the origin of fatigue cracks, it had been found that corrosion pits were grown into hemispherical pits and a/c(the surface diameter, 2c and the depth, a of corrosion pit)was about 1.0-1.5regardless of the variation of salt solution concentration. The difference of corrosion pit depth growth rate was increased with an increase in concentration of salt solution according to an increase in stress level.

• 한국식품영양과학회지
• /
• 제44권10호
• /
• pp.1525-1530
• /
• 2015

본 연구는 전통 된장이 최근 혈전용해능력, 피부병, 혈관질환 예방, 면역강화, 항산화 효과, 항암 효과 등의 우수한 기능이 밝혀지고 있지만 식염 함량이 높다는 단점을 가지고 있어 이를 해결하기 위해 저염 된장 제조를 목적으로 염수 농도를 13, 14, 15, 16, 17, 18%로 하여 전통 된장을 제조한 후 수분 함량, 식염 함량, 아미노태 질소 함량, pH 및 적정산도, 환원당 함량을 분석하였으며, 관능평가 묘사분석을 통해 농도별 특성의 강도와 기호도를 측정하였다. 소금물 농도를 달리하여 된장을 제조하고 이화학적 분석을 실시한 결과 염수 농도가 높아질수록 수분 함량과 아미노태 질소 함량은 낮아지는 경향을 보였으나, 소금 함량과 환원당 함량은 염수의 농도가 높아질수록 높아지는 경향을 나타내었다. 각 처리구별 된장의 pH 값은 염수의 농도가 낮을수록 낮아지는 경향을 나타내었으나, 적정산도 값은 염수의 농도가 낮을수록 높아지는 경향을 나타내었다. 소금물 농도를 달리하여 된장을 제조하였을 때 정량묘사분석 결과 된장은 18%가 가장 높은 짠맛을 냈는데 15%, 16%, 17% 처리구가 18%와 짠맛에서 유의적 차이가 존재하지 않았다. 기호도 평가로 보면 된장은 17%와 18%가 유의적으로 가장 많이 선호되었다. 결론적으로 전통 된장은 된장 숙성 시작 3개월 후까지 결과를 측정한 바로는 물리화학적 특성이나 관능특성 강도 측면에서 유의차를 나타내지 않는 농도는 16% 이상의 염수로 된장을 제조하였을 때로 16%의 염수를 이용하여 전통 된장을 제조하는 것은 가능할 것으로 보인다. 그러나 기호도 평가 결과와 저장기간에 따른 변화를 고려하여야 할 것으로 판단된다.

• 한국식품영양과학회지
• /
• 제31권6호
• /
• pp.999-1004
• /
• 2002

식염농도를 3, 5, 7 및 9%로 각각 조제한 2$^{\circ}C$의 염지액에 등심고기를 20일간 염지하면서 식염농도와 염지기간이 근원 섬유단백질의 추출성과 소편화도, 보수력, 식염함량 및 기호성에 미치는 영향을 검토하였다. 식염농도 3, 5 및 7%의 염지액에 염지한 등심고기 근원섬유단백질의 추출성과 보수력은 염지 20일까지, 근원섬유 소편화도는 염지 16일까지, 모두 식염농도가 높을수록 점점 높게 나타났으며, 9%의 염지액에 염지한 것은 일정한 경향을 보이지 않았다. 가열육의 색도는 염지액의 식염농도가 높을수록, 그리고 염지 16일까지 점점 양호하게 나타났다 염지액의 식염농도 3%에서는 염지육의 발색이 균일하게 되지 않았으며, 9%에서는 발색이 잘 되었으나 풍미와 종합적인 기호성이 좋지 않았다. 등심고기는 염지액의 식염농도5%에서 16일, 또는 7%에서 12일 염지하면 기호성이 우수하게 되었다.

• 한국축산식품학회지
• /
• 제32권3호
• /
• pp.285-292
• /
• 2012

This study was conducted in order to evaluate the effects of brine pre-soaking at different concentrations and drying time on the quality characteristics of pork jerky. The physicochemical properties of pork jerky including final moisture content, water activity ($a_w$), shear force, microstructure, and thiobarbituric acid reactive substance (TBARS) values were investigated. The sensory attributes of pork jerky were evaluated and used as parameters for determining the optimum drying condition. The sliced pork samples were pre-soaked at salt concentrations ranging from 0 to 10% for 3 h and then dried at $70^{\circ}C$ for up to 10 h. The pre-soaked samples in the salt solution showed higher final moisture content than the control sample after drying for 10 h. The final moisture content of pork jerky increased with increasing salt concentrations. On the other hand, the water activity with regards to the pre-soaked samples in a 10% salt solution showed the lowest value for up to 8 h drying. The shear force values of pork jerky decreased with increasing salt concentration while the TBARS values of the samples increased with increasing salt concentrations. Sensory evaluation suggested that the color, flavor, juiciness, and tenderness of the pork jerky samples were improved by pre-soaking in a 2% salt solution and the highest likeability score of pork jerky among the samples were obtained by pre-soaking in a 2% salt solution prior to drying.

• 한국식품영양과학회지
• /
• 제19권3호
• /
• pp.234-238
• /
• 1990

The effects of salt concentration immersion time in a salt solution prior to air dehydration and heating of air temperature during dehydration upon the browning reaction and pyruvic acid content of air dried garlics to a 6.5% moisture content(wet basis) were analyzed by a response surface methodology(RSM), Those values were also predicted by using a second degree polynomial regression model. Heating of air temperature was the most significant factor affecting the both browning reaction and pyruvic acid content. Salt concentration had more influence to browning reaction than immersion time whereas immersion time was more impor-tant factor than salt concentration on a retention of pyruvic acid sugested different processing conditions. While the processing conditions to minimize the browning reaction(O.D=0.009) were 0.3% of salt solution 9 min of immersion time and 5$0^{\circ}C$ of air temperature compared to control(O.D=0.022) of air dehydration at 5$0^{\circ}C$ Pyruvic acid contents were maximized(174 $\mu$mole/g garlic solid) at the 0.1% of salt solution 3 min of immersion time and 5$0^{\circ}C$ of air temperature compared to control(147 $\mu$mole/g garlic solid) of air dehydration at 5$0^{\circ}C$

• Preventive Nutrition and Food Science
• /
• 제8권3호
• /
• pp.230-234
• /
• 2003

Mass transfer characteristics during osmotic dehydration of carrots were studied as functions of immersion temperature and time, and sugar and salt concentrations. The effect of osmotic dehydration on the degree of browning of air-dried carrots was also evaluated. Increasing the immersion temperature and time, sugar concentration, and salt addition increased water loss, sugar gain, molality and rate of dehydration. The water loss and increases in solids, and molality were rapid in the beginning of the process and then increased slowly during remainder of the process. Increasing 1 or 2% salt concentration in the 40$^{\circ}$Brix sugar solution at 6$0^{\circ}C$ increased water loss and solid gain. Salt addition was not able to significantly affected on water loss and solid gain compare to temperature (40～8$0^{\circ}C$) and sugar concentration (20～60$^{\circ}$Brix) changes due to the low salt concentration. A minimum degree of browning of the air-dried carrots (O.D. = 0.048) could be achieved using binary solutions (40$^{\circ}$Brix sugar solution with 2% salt addition) with 24 min of immersion time compared to control (O.D. = 1.308) or blanching with 24 min of immersion time (O.D. = 0.174).

• 대한전기학회논문지
• /
• 제34권11호
• /
• pp.436-439
• /
• 1985

An effect of the salt solution on the Water Tree Propagation was shown systematically from the actions of the salt concentration in deionized water. It may be able to suggest that the tree propagation is possibly to be connected with an intervention of the electrochemical or chemical actions of the salt solution on water tree propagation, which may likely depend on the growth level of the trees. We have pointed out that it is necessary to study the structure of water tree under the electrical stress.

• 대한가정학회지
• /
• 제17권4호
• /
• pp.35-42
• /
• 1979

The effects of salt concentration on the qualities of cooked egg preparations were evaluated. Diluted egg samples which contained different amounts of slat were prepared by diluting whole egg fluid with rice washing, anchovy stock , or distilled water. After heating them rapidly, hardness, gel strength, and amount of syneresis were determined along with the performance of sensory test. the pH of the diluted eggs also measured before heating. Results obtained from these experiments are summarized in the following. 1. The pH of whole egg, egg yolk, and egg white was 7.32, 6.31, and 8.41 , respectively. 2. The pH whole eggs after addition of diluting solutions and salt showed a little differences over the whole salt concentration as follows. distilled water dilution > anchovy stock dilution > rice washing dilution 3. The hardness and gel strength of cooked samples were increased with the increase of salt concentration in the range of low salt concentrations of all diluting solution. These physical properties marked maximal values at salt concentration of 3% and then decreased as salt concentration increased. 4. Amount of syneresis decreased as salt concentration increased regardless of all diluting solutions used. 5. In sensory test, 1% salt concentration were scored good by the panel members regardless of diluting solutions which showed no significant difference among three diluting solutions.

• 한국식품조리과학회지
• /
• 제8권1호
• /
• pp.57-63
• /
• 1992

The purpose of this study was to investigate the rheological and thermal properties of yam starch. Yam starch had a hydrodynamic volume with the intrinsic viscosity,［$\eta$］, of 0.29dl/g deionized water. The values of the intrinsic viscosity of yam starch, determined to pH 2-11, varied between 0.07 to 0.18 dl/g. The highest intrinsic viscosity was obtained at pH 7. At salt concentrations 0-0.2 M NaCl, the intrinsic viscosity of yam starch was decreased up to 0.05 M NaCl concentration then increased to 0.07 M NaCl concentration and remained constant to reach 0.2 M NaCl concentration. The overlap parameter, calculated with the intrinsic vicosity data, was 3.45 g/dl in deionized water. The thermal properties of yam starch were investigated by Differential Scanning Calorimetry. Three endotherms were observed both pH solution and salt concentation. In the presence of pH 9, the onset temperature of gelatinization peak was the lowest temperature of 50.$32^{\circ}C$ and the enthalpy ($\Delta$H) was increased in this solution. The effect of salt on the thermal properties of yam starch was determined at salt concetration of 0-0.2 M NaCl. The enthalpy significantly decreased to salt concentration 0.07 M NaCl and the lowest onset temperature of this concentration was 52.$90^{\circ}C$.

• Membrane and Water Treatment
• /
• 제4권3호
• /
• pp.203-214
• /
• 2013

Laboratory tests were performed to determine the efficiency of dye solution desalination by electrodialysis. The study involved anionic dye and mineral salt recovery by obtaining two streams from a salt and dye mixture - dye-rich solution and salt solution. A standard anion-exchange and cation-exchange membranes or monovalent selective anion-exchange membranes were used in the ED stack. It was found that the separation efficiency was strongly dependent on the dye molecular weight. The best results for standard ion-exchange membranes were achieved for the desalination of Direct Black solution. Furthermore, the obtained results implied that the application of monovalent selective anion-exchange membranes improved the recovery of dye and salt solutions - the dye concentration in the diluate remained constant irrespective of the molecular weight of anionic dyes, whereas the salt recovery remained very high (99.5%).