• Journal of Ocean Engineering and Technology
• /
• v.2 no.2
• /
• pp.78-86
• /
• 1988

In order to investigate the corrosion pit occurrence and growth characteristic of M.E.F.(martensite encapsulated islands of ferrite) dual phase steel was made with a suitable heat treatment of raw material(SS41), a corrosion fatigue test was performed under rotary bending in the salt solution having a concentration from 0.01 wt percent to 3.5 wt percent. The fatigue strength of dual phase steel was remarkably decreased with an increase in concentration of salt solution; approximately from 63% to 80% in case of dual phase steel and from 40% to 71% in case of raw material. Corrosion pit occurred in the martensite phase and fatigue cracks from corrosion pits were selectively propagated in martensite phases. In the observation of corrosion pits at the origin of fatigue cracks, it had been found that corrosion pits were grown into hemispherical pits and a/c(the surface diameter, 2c and the depth, a of corrosion pit)was about 1.0-1.5regardless of the variation of salt solution concentration. The difference of corrosion pit depth growth rate was increased with an increase in concentration of salt solution according to an increase in stress level.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.10
• /
• pp.1525-1530
• /
• 2015

Doenjang made with various concentrations of salt solution such as 13, 14, 15, 16, 17, and 18% for making low-salt Doenjang. Physicochemical and sensory characteristics of Doenjang made with various concentrations of salt solution were analyzed. As a result, salt contents of Doenjang made with various concentrations of salt solution were 6.09~13.47%. Amino-type nitrogen showed a higher value when prepared with lower salt solution. The pH value increased with lower concentration of salt solution, whereas total acidity decreased with lower concentration of salt solution. The pH values and total acidity of Doenjang made with more than 16% salt solution were not statistically different. The reducing sugar content ranged from 1.39~6.30 mg/g, and higher salt content was associated with higher reducing sugar content. In the sensory descriptive analysis, Doenjang had the most salty taste at a salt concentration of 18%, whereas Doenjang at concentrations of 15%, 16%, and 17% did not show any statistical differences. In the consumer acceptance test, Doenjang made with 17% and 18% salt solution showed the highest score, followed by Doenjang made with 15% and 16% salt solution. In conclusion, the salty taste of Doenjang made with 16% salt solution might be used to make low-salt Doenjang. However, consumer acceptance of these Doenjangs was lower than that of Doenjang made with 17% and 18% salt solution.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.6
• /
• pp.999-1004
• /
• 2002

In this study, pork loin was cured for 20 days in the 2$^{\circ}C$ curing solution with the salt concentration of 3, 5, 7 and 9% respectively, and the effects of salt concentration and curing time on myofibrillar protein extractability (MPE), myofibrillar fragmentation index (MFI), water holding capacity (WHC), salt content, and palatability of pork loin were investigated. The pork loin cured in the 3, 5 and 7% curing solution showed the increased level of MPE and WHC up to 20 days of curing time, and the increased level of MFI up to 16 days of curing time. Also those values increased with the increasing salt concentration, regardless of the curing time. The pork loin cured in the 9% curing solution did not show any consistency in the results. The boiled cured pork loin showed better color up to 16 days of curing time, as the salt concentration of curing solution increased. The color of pork loin cured in the 3% curing solution was not uniform. The pork loin cured in the 9% curing solution showed good color, but its flavor and palatability were unacceptable. The palatability of pork loin could be improved significantly by curing it in the 5% curing solution for 16 days, and in the 7% curing solution for 12 days.

• Food Science of Animal Resources
• /
• v.32 no.3
• /
• pp.285-292
• /
• 2012

This study was conducted in order to evaluate the effects of brine pre-soaking at different concentrations and drying time on the quality characteristics of pork jerky. The physicochemical properties of pork jerky including final moisture content, water activity ($a_w$), shear force, microstructure, and thiobarbituric acid reactive substance (TBARS) values were investigated. The sensory attributes of pork jerky were evaluated and used as parameters for determining the optimum drying condition. The sliced pork samples were pre-soaked at salt concentrations ranging from 0 to 10% for 3 h and then dried at $70^{\circ}C$ for up to 10 h. The pre-soaked samples in the salt solution showed higher final moisture content than the control sample after drying for 10 h. The final moisture content of pork jerky increased with increasing salt concentrations. On the other hand, the water activity with regards to the pre-soaked samples in a 10% salt solution showed the lowest value for up to 8 h drying. The shear force values of pork jerky decreased with increasing salt concentration while the TBARS values of the samples increased with increasing salt concentrations. Sensory evaluation suggested that the color, flavor, juiciness, and tenderness of the pork jerky samples were improved by pre-soaking in a 2% salt solution and the highest likeability score of pork jerky among the samples were obtained by pre-soaking in a 2% salt solution prior to drying.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.19 no.3
• /
• pp.234-238
• /
• 1990

The effects of salt concentration immersion time in a salt solution prior to air dehydration and heating of air temperature during dehydration upon the browning reaction and pyruvic acid content of air dried garlics to a 6.5% moisture content(wet basis) were analyzed by a response surface methodology(RSM), Those values were also predicted by using a second degree polynomial regression model. Heating of air temperature was the most significant factor affecting the both browning reaction and pyruvic acid content. Salt concentration had more influence to browning reaction than immersion time whereas immersion time was more impor-tant factor than salt concentration on a retention of pyruvic acid sugested different processing conditions. While the processing conditions to minimize the browning reaction(O.D=0.009) were 0.3% of salt solution 9 min of immersion time and 5$0^{\circ}C$ of air temperature compared to control(O.D=0.022) of air dehydration at 5$0^{\circ}C$ Pyruvic acid contents were maximized(174 $\mu$mole/g garlic solid) at the 0.1% of salt solution 3 min of immersion time and 5$0^{\circ}C$ of air temperature compared to control(147 $\mu$mole/g garlic solid) of air dehydration at 5$0^{\circ}C$

• Preventive Nutrition and Food Science
• /
• v.8 no.3
• /
• pp.230-234
• /
• 2003

Mass transfer characteristics during osmotic dehydration of carrots were studied as functions of immersion temperature and time, and sugar and salt concentrations. The effect of osmotic dehydration on the degree of browning of air-dried carrots was also evaluated. Increasing the immersion temperature and time, sugar concentration, and salt addition increased water loss, sugar gain, molality and rate of dehydration. The water loss and increases in solids, and molality were rapid in the beginning of the process and then increased slowly during remainder of the process. Increasing 1 or 2% salt concentration in the 40$^{\circ}$Brix sugar solution at 6$0^{\circ}C$ increased water loss and solid gain. Salt addition was not able to significantly affected on water loss and solid gain compare to temperature (40～8$0^{\circ}C$) and sugar concentration (20～60$^{\circ}$Brix) changes due to the low salt concentration. A minimum degree of browning of the air-dried carrots (O.D. = 0.048) could be achieved using binary solutions (40$^{\circ}$Brix sugar solution with 2% salt addition) with 24 min of immersion time compared to control (O.D. = 1.308) or blanching with 24 min of immersion time (O.D. = 0.174).

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.34 no.11
• /
• pp.436-439
• /
• 1985

An effect of the salt solution on the Water Tree Propagation was shown systematically from the actions of the salt concentration in deionized water. It may be able to suggest that the tree propagation is possibly to be connected with an intervention of the electrochemical or chemical actions of the salt solution on water tree propagation, which may likely depend on the growth level of the trees. We have pointed out that it is necessary to study the structure of water tree under the electrical stress.

• Journal of the Korean Home Economics Association
• /
• v.17 no.4
• /
• pp.35-42
• /
• 1979

The effects of salt concentration on the qualities of cooked egg preparations were evaluated. Diluted egg samples which contained different amounts of slat were prepared by diluting whole egg fluid with rice washing, anchovy stock , or distilled water. After heating them rapidly, hardness, gel strength, and amount of syneresis were determined along with the performance of sensory test. the pH of the diluted eggs also measured before heating. Results obtained from these experiments are summarized in the following. 1. The pH of whole egg, egg yolk, and egg white was 7.32, 6.31, and 8.41 , respectively. 2. The pH whole eggs after addition of diluting solutions and salt showed a little differences over the whole salt concentration as follows. distilled water dilution > anchovy stock dilution > rice washing dilution 3. The hardness and gel strength of cooked samples were increased with the increase of salt concentration in the range of low salt concentrations of all diluting solution. These physical properties marked maximal values at salt concentration of 3% and then decreased as salt concentration increased. 4. Amount of syneresis decreased as salt concentration increased regardless of all diluting solutions used. 5. In sensory test, 1% salt concentration were scored good by the panel members regardless of diluting solutions which showed no significant difference among three diluting solutions.

• Korean journal of food and cookery science
• /
• v.8 no.1
• /
• pp.57-63
• /
• 1992

The purpose of this study was to investigate the rheological and thermal properties of yam starch. Yam starch had a hydrodynamic volume with the intrinsic viscosity,［$\eta$］, of 0.29dl/g deionized water. The values of the intrinsic viscosity of yam starch, determined to pH 2-11, varied between 0.07 to 0.18 dl/g. The highest intrinsic viscosity was obtained at pH 7. At salt concentrations 0-0.2 M NaCl, the intrinsic viscosity of yam starch was decreased up to 0.05 M NaCl concentration then increased to 0.07 M NaCl concentration and remained constant to reach 0.2 M NaCl concentration. The overlap parameter, calculated with the intrinsic vicosity data, was 3.45 g/dl in deionized water. The thermal properties of yam starch were investigated by Differential Scanning Calorimetry. Three endotherms were observed both pH solution and salt concentation. In the presence of pH 9, the onset temperature of gelatinization peak was the lowest temperature of 50.$32^{\circ}C$ and the enthalpy ($\Delta$H) was increased in this solution. The effect of salt on the thermal properties of yam starch was determined at salt concetration of 0-0.2 M NaCl. The enthalpy significantly decreased to salt concentration 0.07 M NaCl and the lowest onset temperature of this concentration was 52.$90^{\circ}C$.

• Membrane and Water Treatment
• /
• v.4 no.3
• /
• pp.203-214
• /
• 2013

Laboratory tests were performed to determine the efficiency of dye solution desalination by electrodialysis. The study involved anionic dye and mineral salt recovery by obtaining two streams from a salt and dye mixture - dye-rich solution and salt solution. A standard anion-exchange and cation-exchange membranes or monovalent selective anion-exchange membranes were used in the ED stack. It was found that the separation efficiency was strongly dependent on the dye molecular weight. The best results for standard ion-exchange membranes were achieved for the desalination of Direct Black solution. Furthermore, the obtained results implied that the application of monovalent selective anion-exchange membranes improved the recovery of dye and salt solutions - the dye concentration in the diluate remained constant irrespective of the molecular weight of anionic dyes, whereas the salt recovery remained very high (99.5%).