• Food Science and Preservation
• /
• v.30 no.4
• /
• pp.549-561
• /
• 2023

Recently, consumers have gained an interest in natural and minimally processed foods, inciting the food industry to consider using of natural products as preservatives. Strawberries are a widely consumed fruit but are also highly perishable. Therefore, in this study, the physicochemical properties of strawberries (Fragaria×ananassa) were evaluated after a 12-h treatment with lemon essential oil (Citrus×limon) or cinnamon essential oil (Cinnamomum cassia) vapor during storage at 22℃ for 4 days in an accelerated shelf-life study and 4℃ for 18 days in a validation study. Weight loss was blunted in fruit treated with oil vapor during the first days of storage (p<0.05). Lemon essential oil delayed fruit darkening (p<0.05) but reduced the firmness of strawberries (p<0.05). Strawberries treated with cinnamon essential oil had a higher concentration of reducing sugars (p<0.05), and a decrease of 16.7% visible decay, although the difference was insignificant. Oil vapor treatment did not alter the pH, organic acid content, or soluble solid content during storage compared to the control. Since lemon and cinnamon essential oils have well-documented antimicrobial properties, they may be suitable for the natural preservation of fruit. This study provides new information on using essential oil vapor treatment to preserve fruits, and potentially decrease fruit loss and waste.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.10
• /
• pp.1638-1644
• /
• 2007

The effect of carbon sources on tacrolimus production by a mutant strain of Streptomyces clavuligerus CKD 1119, an isolate from soil, was examined. Among the carbohydrates and oils tested in this work, a mixed carbon source of soluble starch and com oil was the best. An analysis of the culture kinetics also showed that, in contrast to the carbohydrates, the com oil was consumed later in the antibiotic production phase, implying that the oil substrate was the principal carbon source for the biosynthesis of tacrolimus, and this was directly proven by experiments using $^{14}C$-glucose and $^{14}C$-oleate substrates. Furthermore, com oil induced the formation of lipase by the mutant strain, whereas the addition of glucose significantly repressed lipase activity. The lipase activity exhibited by the FK-506-overproducing mutants was also observed to be directly proportional to their tacrolimus yield, indicating that a high lipase activity is itself a crucial factor for tacrolimus production. A feasibility study with a 200-1 pilot-scale fermentor and the best strain (Tc-XII-15322) identified in this work revealed a high volumetric and specific productivity of about 495 mg/l and 0.34 mg/mg dry mycelium, respectively.

• Journal of the Korean Society of Industry Convergence
• /
• v.16 no.3
• /
• pp.95-102
• /
• 2013

It is indispensable to modern society metal processing since the industrialized rapidly, but it is a metalworking cutting fluid immediately. In addition, this means selecting a emulsion on the basis of quality criteria processing method, the material of the material, cutting depth, cutting speed, Djourou fence Liang, and surface roughness, cutting oil, the shape of the device based on the emulsion, I will be the structure of the tank, filtration equipment also changes. In particular, acting bacteria is now breeding in response to the passage of time due to metal ion degradation due to heat generated hydraulic fluid leakage, humidity tung, during processing, seep from processing material at the time of processing the water-soluble cutting oil for generating the malodor by dropping significantly the performance of the cutting oil to corruption from, sometimes by introducing various additives to suppress spoilage in advance. In this study, we expect the effect of the cost reduction in the extension of fluid replacement cycle through the application of the management apparatus and deep understanding in the management of cutting fluid, the working environment through the understanding and interest of workers in the production site more than anything I try to become useful for the improvement.

• Journal of Aquaculture
• /
• v.10 no.2
• /
• pp.189-197
• /
• 1997

A series of short (8 hours) and long term (96 hours) exposure studies was conducted on a laboratory scale to evaluation (1) the threshold concentrations of petroleum hydrocarbon in seawater which can lead to tainting problems in yellow tail (Seriola quinqueradiata) and (2) the time to recover (depuration period) once the tainting has occurred. The water-soluble fraction (WSF) of crude oil was prepared by stirring the oil with cold seawater. The main component of the WSF were low-boiling aromatics, although these were only al small proportion of the starting oil. From the sencory evaluation it was concluded that the threshold hydrocarbon levels in seawater which will impart a taint in yellow tail fillets within a 8-hour exposure period (short exposure period) are in the range of 0.4 to 1.0 ppm and within a 96-hour exposure period (long exposure period) are in the range of 0.2 to 0.5 ppm. Depuration trials were carried out with WSF from crude oil. The fish were exposed for 48 hours to concentration of 2.5 ppm hydrocarbons. After 48-hour exposure period, the fish were allowed to depurate in fresh, uncontaminated seawater. Depuration time for these fish was 10 days. The taste panelists were able to detect the contaminated fillets very easily while the depurated fish could not be distiguished from the control.

• Safety and Health at Work
• /
• v.9 no.2
• /
• pp.180-183
• /
• 2018

Background: This research investigates the degrees of slipperiness felt by the participants who walk on contaminants applied to a floor surface to decide degrees of slipperiness for various contaminants. Methods: For the experiment, 30 participants walked on a floor to which six contaminants were applied. All participants took the analytic hierarchy process (AHP)-based slipperiness questionnaire survey for the six kinds of contaminants, and the results were compared with the coefficient of friction. Results: The results of slip risk from the AHP indicate that grease is the most slippery of the six contaminants, followed by diesel engine oil, hydraulic oil, cooking oil, water-soluble cutting oil, and water in a decreasing order of slipperiness. When the results of slip risk from the AHP are compared with the static coefficient of friction for each contaminant, the order of slip risk follows the same trend. Although the results of slip risk from the AHP coincide with the static coefficient of friction, further study would be needed to investigate this relationship. Conclusion: This study will contribute as reference material for future research on preventing industrial accidents that result in falls from high places due to slipping.

• Journal of Nutrition and Health
• /
• v.8 no.2
• /
• pp.19-26
• /
• 1975

The role of fat is important from nutritional standpoint. The physiological functions of fat are energy yielding as well as the carrier of fat soluble vitamins, with special activities of essential fatty acids. It is fortunate that Korean families prefer to use vegetable oils rather than those from animal origin. But the problems are focused on better qaulity of food oils with attempt to exploit the available resources. This study was undertaken to inevestigate the fatty acid compositions of Korean origin both from conventional and unconventional resources of gas-liquid chromatography. The results obtained are as follows. 1. The total lipid contents of seeds of red pepper, Korean squash, sesame, perilla (var Japonica), and Korean pine nuts and walnuts were 24.3%, 56.6%, 56.4%, 46.9%, 69.8%, and 67.2%, respectively. 2. The saponification numbers of samples ranged from 190 to 200. It showed that the mean molecular weights of fatty acids composing the lipids were very much closed each other. 3. Iodine numbers of varing seed oils ranged from 96.5 of Korean squash seed oil to 124.6 of walnut oil. Oils obtained from squash seeds and sesame seeds showed significantly lower value, while others ranged from 122 to 125. 4. In the fatty acid compositions, squash seed oil was composed mainly of unsaturated fatty acids, 74.9% of which was oleic acid, whereas red pepper seed oil, pine nut oil, and sesame oil contained linoleic acid as a major component showing 64.4%, 56%, 48.8%, and 47.8%, respectively. In perilla seed oil, the amounts of linoleic and linolenic acids were 14.1% and 58%, respectively which meant nearly three-fourths of the total fatty acidsbeing the unsaturated essential fatty acids. This study will encourage the use of these conventional and unconventional vegetable oils which have highr ratios of polyunsaturated to saturated fatty acids.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.3
• /
• pp.169-176
• /
• 2013

Objectives: The aim of this study is to critically review the health effects of not only direct exposure to biocide, but also indirect exposure to by-product hazardous agents generated through the use of biocide in metalworking operations. Methods: An extensive literature review was conducted of studies reporting on respiratory disease cases, particularly hypersensitivity pneumonitis (HP), in environments using water-soluble metalworking fluids (MWFs). Keyword search terms included 'metalworking fluids', 'machining fluids', 'metalworking operation' 'machining operation' and 'biocide', which were also used in combination. Additional articles were identified in references cited in the articles reviewed. Results: Several of the field, epidemiological and experimental studies reviewed assumed that the symptoms and signs typical of HP developed in machinists who handled water-soluble MWF could be caused by inhalation exposure to nontuberculous mycobacteria (NTM). Most NTM are known to be not only resistant to both biocide and disinfectant, but also to have acid-fast cell walls that are highly antigenic. The presence or persistence of the Mycobacterium species, referred to as NTM, in metalworking fluid-using operations may be caused by NTM contamination in either the natural water or tap water that is used to dilute the base oil and additives for water-soluble MWFs. This hypothesis that NTM contamination in water-soluble MWFs is a causative agent of HP has high biologic plausibility, such as antigenic property, hydrophobicity and small diameter (< 5 um). Conclusions: Aerosolized mycobacteria colonized from MWF are likely to be causing the HP. Inhalation exposure to mycobacteria should be considered as a possible cause for the development of HP.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.6
• /
• pp.1196-1199
• /
• 2004

A bacterium, isolated from rabbit's waste and identified as Cellulomonas sp., had cellulase and thermostable $\alpha$-amylase activity when grown on wheat bran. Maximum activity of thermostable $\alpha$-amylase was obtained by adding $3\%$ soluble starch. However, soybean oil (1 ml $1^{-1}$) could increase the production of $\alpha$-amylase and cellulase in 'wheat bran. The $\alpha$-amylase was characterized by making a . demonstration of optimum activity at $90^{\circ}C$ and pH 6- 9, with soluble starch as a substrate. The effect of ions on the activity and the stability of this enzyme were investigated. This strain secreted carboxymethyl cellulase (CMCase), cellobiase ($\beta$­glucosidase), and filter paperase (Fpase) during growth on wheat bran. Carboxymethy1cellulase, cellobiase, and Fpase activities had pH optima of 6, 5.5, and 6, respectively. CMCase and cellobiase activities both had an optimum temperature of $50^{\circ}C$, whereas Fpase had an optimum temperature of $45^{\circ}C$.

• Natural Product Sciences
• /
• v.12 no.3
• /
• pp.162-165
• /
• 2006

Curcuma aeruginosa Roxb. (FamilyZingeberaceae), commonly known as 'pink and blue giner' is widely used in Indian system of medicine since time immemorial. The plant is found well in wild habitat and cultivated in southern India. The plant is distinguished by red corolla lobes and ferruginous or greenish-blue rhizome. Rhizoma is used medicinally as anti-diarrheal, anti-fungal; external use as astringent for wounds. A detailed pharmacognostic evaluation of its rhizome showed total ash 6.1%, acid insoluble ash 1.20%, alcohol soluble extractives 3.70% , water soluble extractives 14.50%, sugar 20.93%, starch 41.85%, and tannins 0.68%. Oh hydro distillation, the rhizomes and sessile tubers yielded 0.17% oil.

• ALGAE
• /
• v.18 no.4
• /
• pp.341-347
• /
• 2003

The potential antioxidative activity of water-soluble enzymatic hydrolyzates from a kelp, Ecklonia cava was evaluated by free radical scavenging and lipid peroxidation assays. To prepare water-soluble hydrolyzates from E. cava the seaweed was enzymatically hydrolyzed by five carbohydrases (Viscozyme, Celluclast, AMG, Termamyl and Ultraflo) and five proteases (Protamex, Kojizyme, Neutrase, Flavourzyme and Alcalase). Among all the hydrolyzates, Celluclast hydrolyzate effectively scavenged free radicals released from DPPH (1,1-diphenyl-2- pricrylhydrazyl) and recorded around 73% scavenging activity at the concentration of 4 mg ${\cdot}ml^{-1}$. This hydrolyzate was thermally stable and DPPH radical scavenging activity remained 80% or higher at heating temperatures of 40 and 60$^{\circ}C$ up to 12 h and around 80% at 100$^{\circ}C$ up to 8 h. AMG and Ultraflo hydrolyzate inhibited the lipid peroxidation of fish oil as that of $\alpha$-tocopherol. These results suggested that an enzymatic extraction will be an effective way for the production of a potential antioxidant from seaweeds.