• Corrosion Science and Technology
• /
• v.7 no.4
• /
• pp.237-242
• /
• 2008

Physical properties of water, such as dielectric constant and ionic product, significantly vary with the density of water. In the supercritical conditions, since density of water widely varies with pressure, pressure has a strong influence on physical properties of water. Dielectric constant represents a character of water as a solvent, which determines solubility of an inorganic compound including metal oxides. Dissociation equilibrium of an acid is also strongly dependent on water density. Dissociation constant of acid rises with increased density of water, resulting in drop of pH. Density of water and the density-related physical properties of water, therefore, are the major governing factors of corrosion and environmentally assisted cracking of metals in supercritical aqueous solutions. This paper discusses importance of "physical properties of water" in understanding corrosion and cracking behavior of alloys in supercritical water environments, based on experimental data and estimated solubility of metal oxides. It has been pointed out that the water density can have significant effects on stress corrosion cracking (SCC) susceptibility of metals in supercritical water, when dissolution of metal plays the key role in the cracking phenomena.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.3
• /
• pp.189-197
• /
• 2007

The solubility of U(VI) hydrolysis products was determined by using a laser-induced breakdown detection (LIBD) technique. The experiments were carried out at uranium concentrations in range from $2{\times}10^{-4}\;M\;to\;4{\times}10^{-6}\;M$, pH values between 3.8 and 7.0, the constant ionic strength of 0.1 M $NaClO_4$ and the temperature of $25.0{\pm}0.1^{\circ}C$. The solubility product of U(VI) hydrolysis products was calculated from LIBD results by using the hydrolysis constants selected in NEA-TDB. The solubility product extrapolated to zero ionic strength, ${\log}K^{\circ}_{sp}=-22.85{\pm}0.23$ was calculated by using a specific ion interaction theory (SIT). The spectral features of ionic species in uranium solutions were investigated by using a conventional UV-visible absorption spectrophotometer and a fluorophotometer, respectively, $(UO_2)_2(OH)_2^{2+}\;and\;(UO_2)_3(OH)_5^+$ were dominant species at uranium concentration of $2{\times}10^{-4}\;M$.

• Journal of Pharmaceutical Investigation
• /
• v.27 no.1
• /
• pp.29-38
• /
• 1997

Precipitation was formed during the preparation of decoction from a mixture of Scutellariae Radix and Coptidis Rhizoma. Baicalin and berberine were identified in this coprecipitated product (CPP) and these components were the active ingredients of two herbal medicine. We extracted respectively crude baicalin and berberine in Scutellariae Radix and Coptidis Rhizoma and prepared coprecipitate of crude baicalin-berberine. To increase the stability and bioavailability of coprecipitate of crude baicalin-berberine(CBB), which is slightly soluble drug, its inclusion complex was prepared and studied in this experiment. Inclusion complex of CBB with ${\beta}-cyclodextrin(CBB-{\beta}-CD)$ was prepared by freeze drying method and its characteristics were ascertained by means of solubility test, differential thermal analysis(DTA) and scanning electron microscope(SEM). The type of $CBB-{\beta}-CD$ is classified as $A_L-type$ on phase solubility diagram, and the stoichiometric ratio of CBB(baicalin in CBB) : ${\beta}-CD$ complex is 1:1 and formation constant is 151 $M^-1$. The solubility, dissolution, in situ absorption and serum concentration of $CBB-{\beta}-CD$ were significantly increased when compared to CBB. Therefore enhanced bioavailability of CBB by inclusion complexation with ${\beta}-cyclodextrin$ might be useful for dosage form design of active ingredients of two herbal medicine.

• Corrosion Science and Technology
• /
• v.11 no.6
• /
• pp.257-262
• /
• 2012

Flow accelerated corrosion (FAC) of the carbon steel piping in nuclear power plants (NPPs) has been major issue in nuclear industry. Rotating cylinder FAC test facility was designed and fabricated and then performance of the facility was evaluated. The facility is very simple in design and economic in fabrication and can be used in material and chemistry screening test. The facility is equipped with on line monitoring of pH, conductivity, dissolved oxygen(DO), and temperature. Fluid velocity is controlled with rotating speed of the cylinder with a test specimen. FAC test of SA106 Gr. B carbon steel under 4 m/s flow velocity was performed with the rotating cylinder at DO concentration of less than 1 ppb and of 1.3 ppm. Also a corrosion test of the carbon steel at static condition, that is at zero fluid velocity, of test specimen and solution was performed at pH from 8 to 10 for comparison with the FAC data. For corrosion test in static condition, the amount of non adherent corrosion product was almost constant at pH ranging from 8 to 10. But adherent corrosion product decreased with increasing pH. This trend is consistent with decrease of Fe solubility with an increase in pH. For FAC test with rotating cylinder FAC test facility, the amount of non adherent corrosion product was also almost same for both DO concentrations. The rotating cylinder FAC test facility will be further improved by redesigning rotating cylinder and FAC specimen geometry for future work.

• Journal of Adhesion and Interface
• /
• v.4 no.2
• /
• pp.1-9
• /
• 2003

Epoxy-amine liquid prepolymers are extensively applied onto metallic substrates and cured to obtain painted materials or bonded joint structures. Overall performances of such systems depend on the created interphase between the organic layer and the substrate. When epoxy-amine liquid mixtures are applied onto more or less hydrated metallic oxide layer, concomitant amine chemical sorption and hydroxide dissolution appear lending to the chelate formation. As soon as the chelate concentration is higher than the solubility product, these species crystallize as sharp needles. Moreover, intrinsic and thermal residual stresses are developed within painted or bonded systems. When residual stresses are higher than the organic layer/substrate adhesion, buckling, blistering, debonding may occur leading to a catastrophic drop of system performances. Practical adhesion can be evaluated with either ultimate parameters (Fmax or Dmax) or the critical strain energy release rate, using the three point flexure test (ISO 14679-1997). We observe that, for the same system, the ultimate load decreases while residual stresses increase when the liquid/solid time increases. Ultimate loads and residual stresses depend on the metallic surface treatment. For these systems, the critical strain energy release rate which takes into account the residual stress profile and the Young's modulus gradient remains quite constant whatever the metallic surface treatment was. These variations will be discussed and correlate to the formation mechanisms of the interphase.

• Textile Coloration and Finishing
• /
• v.3 no.3
• /
• pp.34-43
• /
• 1991

The dyeing property of milling type acid dyes with various chemical constitution were studied in one bath dyeing of Wool/Nylon blended fabrics and the proper dyeing condition to get solid color by using reserving agent was also examined. The result of the experiments can be summarized as follows; 1) Although the effect of pH on dyeing of wool with a highly hydrophiilic dye is great in the dyeing of wool and nylon, the proper pH of dyeing bath is weakly acidic 5, in which levelling dye can be obtained by increasing the solubility product. 2) Under a constant pH, the dye with fewer numbers of sulfonic acid groups increases the dyeing amount of nylon as the concentration of the dye is increased. Thus the appropriate dye for light color is the one with many numbers of sulfonic acid groups and the proper dye for medium and deep color is of fewer sulfonic acid groups for one-bath dyeing. 3) When the dye concentration is greater than the critical depth, the K/S value of wool and nylon was almost not effected or slightly increased.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.3
• /
• pp.145-151
• /
• 2023

In order to extend shelf life for rockfish fillets by modified atmosphere packaging (MAP), different package atmospheres were compared in the product quality preservation. Firstly, CO₂ solubility was measured at 0, 5, 10, and 15℃ to be incorporated into the mathematical model to predict the volume and CO₂ concentration of the package at expected storage temperature. The CO₂ solubility given in Henry's constant decreased with temperature to be fitted with a linear equation. Then air packaging as control and four MAP conditions of 100 g fillets were prepared and stored for duration of 5 days at 10℃ to compare them in the quality preservation effect. Four MAP conditions employed were CO₂(60):O₂(30):N₂(10), CO₂(60):O₂(0):N₂(40), CO₂(30):O₂(30):N₂(40) andCO₂(30):O₂(0):N₂(70). MAP conditions with high CO₂ concentration inhibited total aerobic bacteria, and the conditions containing O₂ led to low TVB-N. MAP of CO₂(60):O₂(30):N₂(10) was found to be the best condition for rockfish fillet preservation considering total aerobic bacteria growth and nitrogenous volatiles production.

• Journal of the Korean Ceramic Society
• /
• v.35 no.12
• /
• pp.1286-1293
• /
• 1998

${SO_4}^{2-}$ ions present in industrial waste water if combined with other metal ions in the water can cause serious scale problem in a transporting pipe. In this study therefore ${SO_4}^{2-}$ ions in an acidic solution have been removed by using surface active glasses. Glasses with various compositions of $SiO_2-Na_2O-B_2O_3-RO$ (R=Mg, Ca, Sr, Ba) system were reacted in a ${SO_4}^{2-}$ ion-containing solution with various pHs ranging from 1 to 4 for various time the reacted glass surfaces were analyzed by XRD and SEM and all ions in the reacted solution were also measured ${SO_4}^{2-}$ ions in the solution were combined with divalent ions leached out of glass and precipitated on the glass surface as sulfate crystals. In this was the surface ion could be removed from the acidic solution. The sulfate ion removal capacity is closely related to the solubility product con-stants of the newly formed sulfate crystals. Almost no sulfate crystal was formed on the MgO-containing glass while sulfate crystals were easily formed on the glass containing either SrO or BaO This indicates that those glasses have strong removal efficiency of ${SO_4}^{2-}$ ions from the solution.

• Resources Recycling
• /
• v.23 no.1
• /
• pp.48-57
• /
• 2014

In this study, we have investigated the influence of the nature of solvent on the grafting reaction of maleic anhydride onto polyethylene wax obtained as a by-product in a high density polyethylene plant. The results show that the grafting ratio in xylene as a solvent was higher than toluene. This is because xylene has excellent monomer solubility, swelling property and miscibility. It has been also observed that grafting degree shows an initial jump in percentage of grafting with increasing amount of solvent, from 0% v/w to 200% v/w giving maximum grafting in 200% v/w and then slightly decreases on further increase in the amount of solvent and becomes almost constant. It can be also seen that gel content was not formed under the use of solvent. It means that solvent prevented cross-linking reaction due to chain transfer reactions to solvent molecules. Studies of melt viscosity at $140^{\circ}C$ showed that viscosity increased after grafting of maleic anhydride onto polyethylene wax.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.2
• /
• pp.306-310
• /
• 2005

The comparison in release rate constant and properties of extracts from extruded raw ginseng and extruded white ginseng was conducted to apply extrusion process for manufacturing of released ginseng tea bag. Dry raw ginseng and white ginseng powder were extruded at 20∼30% moisture content and 200∼300 rpm by using an experimental twin-screw extruder. Browness and redness (both indicated the releasing of saponin and ginsenosides) were increased with the increase in the screw speed and the decrease of moisture content. Crude saponin and water solubility index (WSI) of both ginseng also share the same behaviour against the level of screw speed and moisture content, as well as browness and redness. The particle size effects of extruded raw ginseng at 20% and 28% moisture content on absorbance of released extract at 260 up to 560 nm, WSI, and water absorption index were determined. While particle size decreased from 800∼1000 nm to 200∼500 nm, absorbance and WSI are decreased. Absorbance and WSI shown increasing level while moisture content was decreased. In conclusion, the formation of pores by expansion and disruption of cell wall in extrusion cooking were obviously responsible to increase the amount of released extract of extruded ginseng and its WSI as well. The extrusion process turns out be the efficient process for manufacturing of commercial ginseng tea product than those of other thermal processes.