• 융합정보논문지
• /
• 제7권1호
• /
• pp.67-73
• /
• 2017

제지슬러지 소각재, 용광로 슬래그, 미세분말 생석회, 무수석고 및 프라이애쉬를 주성분으로 하는 고화제를 염분을 함유한 해양토양에 알맞도록 제조하였다. 고화제이 주성분은재활용된 세라믹 종류이며 이중 CaO가 고화작용에 있어서 중요한 역할을 한다. 고화처리 후 중성화 시간은 약 2주일이었으며, 표준사를 사용하여 1주일 양성 후 모르타르 실험에서 압축강도는 약 12N/mm2 정도로 나타났다. 이것은 수도권 매립지에 사용되고 있는 고화제에 비하여 14배 정도의 강도이다. 염분 함유된 해양토양에 적용하여 평판재하실험을 한 결과 5일정도 지나면 대형도저가 지나갈 수 있을 정도의 항복하중을 얻었다. 일축압축강도 실험에서는 5일 경과 후 약 300kPa의 전단강도를 얻었다. 인천지역과 같이 해양 매립이 많이 이루어지고 있는 지역의 연약지반 보완작업에 유용하게 적용될 것으로 파악된다.

• 한국산업보건학회지
• /
• 제16권1호
• /
• pp.27-35
• /
• 2006

The aim of this study was to identify the sources of benzene detected in airborne of casting workplace where benzene was not used as raw material. We have identified benzene by GC/FID and GC/MSD. In this pilot test, small size iron chamber(diameter 30 cm, height 20 cm) was used. As the raw materials, new sand, recovered sand, and mixed casting sand(new sand + solidifying agent + organic resin + coating material) was tested, respectively. In the new sand benzene was not detected, but in the recovered sand and the mixed casting sand was detected. Xylenesulfonic acid(solidifying agent), one of the mixed casting sand ingredients was thought to product benzene by thermal decomposition above $400^{\circ}$..., but the other raw materials(organic resin and coating material) were thought not to product benzene. In this experiment, the most of benzene by thermal decomposition was produced within 1 hour after pouring the iron solution($1560^{\circ}$...) in small size iron chamber. When the mixed casting sand with coating material was used, the concentration of the produced benzene was average 2.91 ppm(range 1.98~3.72 ppm), and without coating material, benzene concentration was average 0.11 ppm(range 0.08~0.14 ppm).

• 반도체디스플레이기술학회지
• /
• 제18권2호
• /
• pp.11-16
• /
• 2019

The four different polymer compounds were manufactured with the two kinds of plasticizers [(di-2-ethylhexyl sebacate(DOS), and di-2-butyl sebacate(DBS)] and two different additive amounts(18, 26 phr) of the same plasticizer for making cable sheath for ship. Ethylene-vinylacetate, ethylene-propylene-diene-copolymer as matrix polymers and ethylene-vinylacetate grafted maleic anhydride as coupling agent were selected for compounding with fire retardant, closslinking agent, filler, and other additives besides plasticizer. The compound including DOS showed the higher ${\Delta}T$ than that including DBS at the same additive amount in the rheology test. And with increasing plasticizer, the compounds resulted in lower tensile strength and higher elongation by lubricating effect of plasticizer. DOS yielded better aging resistance and cold resistance than DBS due to the good heat resistance and low solidifying point of DOS compared to DBS.

• Journal of Plant Biotechnology
• /
• 제2권3호
• /
• pp.123-128
• /
• 2000

To enhance in vitro plantlet regeneration efficiency of soybean through embryogenesis, the culture conditions such as material part and size of immature seed, 2,4-D, pH and solidifying agents for somatic embryogenesis were investigated. Somatic embryogenesis was induced from the immature embryo, immature cotyledon and embryonic axis explants of the immature seed on MS medium supplemented with 2.0 mg/L 2,4-D. The highest rate (up to 22.9%) of somatic embryogenesis was obtained from the immature cotyledon, following embryonic axis and the immature embryo. The rate varied with the developmental stages of seed. The maximum rate (25.4%) of embryogenesis was obtained from 3-4 mm length of the seed (after 25 days of flowering). The optimum concentration of 2,4-D for embryogenesis was 10 mg/L. The optimum pH was at 5.8 and solidifying agent for medium was better with 0.4% gelrite than with agar. For rapid multiplication of shoot tips from the germinating somatic embryos, they were cultured on MS medium containing 2 mg/L indole-3-butyyic acid (IBA) and 1 mg/L 6-benzyladenine (BA). After then somatic embryos with one and three cotyledons were transferred to the growth regulator free medium. The medium exhibited the higher rate (ca. 50%) of development than the multiplication medium.

• 광물과 암석
• /
• 제35권1호
• /
• pp.25-39
• /
• 2022

본 연구는 원자력 시설 해체 시 발생되는 저준위 및 극저준위 폐토양, 점토와 산업부산물인 고로슬래그를 이용하여 방사성 폐기물을 안전하게 담지할 수 있는 비소성 시멘트의 제조 가능성을 평가하고 광물·형태학적 분석을 통하여 생성된 반응 물질에 대하여 고찰하였다. 본 연구에서는 (1) 폐토양, 점토 및 고로슬래그의 특성 분석, (2) 폐토양, 점토 및 고로슬래그를 고화재 및 성분조정제로 이용한 원전 해체 폐기물 담지를 위한 비소성 시멘트 제조 및 최적의 배합 비율 도출, (3) 제조된 비소성 시멘트 고화체의 수화반응 생성물질에 대하여 광물·형태학적 분석 등을 수행하였다. 비소성 시멘트 고화체의 광물·형태학적 분석 결과, 폐토양과 점토는 수화반응 생성물이 관측되지 않았으며, 고로슬래그의 경우 고화체의 강도를 발현시킬 수 있는 수화반응생성물질인 calcium silicate hydrate (CSH), 에트링가이트(ettringite)가 생성되는 것을 확인하였다. 폐토양, 점토를 고화재로 이용한 비소성 시멘트의 재령 28일 후 고화체는 최적의 배합 비율에서 약 3 MPa의 강도를 나타내 처분장 인수기준 압축강도인 3.44 MPa를 만족하지 못하는 것을 확인하였다. 그러나, 고로슬래그를 고화재로 이용한 비소성 시멘트는 모든 실험 조건에서 처분장 인수기준 압축강도를 만족하며, 최적의 배합 비율에서는 약 27 MPa로 높게 나타나는 것을 확인할 수 있었다. 이러한 결과를 통하여 비소성 시멘트 고화재로 고로슬래그, 방사성 핵종에 대한 흡착제 역할로 폐토양 및 점토를 이용한다면 방사성 폐기물 처분을 위한 최적의 비소성 시멘트를 제조할 수 있을 것으로 판단된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.841-846
• /
• 2003

The purpose of this paper is to present and discuss some of harbor foundation constructed on seashore soft ground by Deep Wing Mixing in deep mixing method. A series of laboratory and field experiments including unconfined compressive strength, permeability, geo-physical survey, sea water concentration, lateral and settlement measurement, field core sample were carried out to check physical, mechanical and environmental characteristics of solidified foundation soil treated by HWS solidifying agent. The results from this research showed that Deep Wing Mixing method could be efficiently applied in the construction site of seashore structure foundation.

• Journal of Microbiology
• /
• 제34권4호
• /
• pp.384-386
• /
• 1996

Application of polyacrylamide gel (PAG) instead of agar to solid cultures of Streptomyces spp. was studied. The improved media were prepared by 1) gelling 20 ml of 5% acrylamide in a glass petri dish at room temperature, 2) washing by running water for more than 8 hr to remove residual reaction reagents, 3) drying at 5$0^{\circ}C$ for 12 hr to make a gel film, 4) autoclaving at 121$^{\circ}C$ for 15 min, and 5) swelling gel for about 4 hr by adding sterile liquid medium. In PAG media there were no differences from the observation of morphological characteristics showing during the cellular differentiation on agar media, whereas the ability to utilize carbohydrates differed somewhat from agar media. Agar media thus were little favorable for biochemical tests which the growth was determined depending on the formation of colony, but washed PAG was superior to serve as a solidifying agent.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.739-742
• /
• 2002

Immobilization of contaminants in contaminated soils by solidification processes is an attractive potential remediation process. In this study, the treatability of lead, copper, toluene, and COD was investigated by leaching test. Industrial sand was adopted as the test material and was contaminated with lead copper, and toluene to 100mg/kg, 500mg/kg, 200mg/kg respectively. P solidifying agent was used as the binder(20% by weight of contaminated soil) in the solidification treatment. The leachability of contaminants leached from the solidified soil was evaluated using column test. The percentage of contaminants leached from the solidified soil was significantly reduced by reaction of waste species with cement components and encapsulation reaction of binder. Based on the tests, it is ascertained solidification process can be a very effective method to control the elution of contaminants from the contaminated soil.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.343-346
• /
• 2002

The chemical compatibility of leachate with the two natural materials was analyzed by performing the hydraulic conductivity test. The selected liner materials were natural marine clay and weathered soil sampled from Kimpo wastefill and Daehwa Dong, Kyonggi Do, respectively. PARAFIX, which is mainly composed of paraffin, cement, stearic acid, PVA etc., was used as solidifying agent. The chemical solutions used in the test were 10% acetic acid, 10% methanol, and real leachate from Kimpo wastefill and the results of tests were compared with that of distilled water. The results of tests show that hydraulic conductivity of solidified clay was increased slightly with permeation of acetic acid, methanol and the increase of hydraulic conductivity was not shown with permeation of leachate, distilled water and in case of weathered soil. Based on the tests, it is ascertained that the tested liner materials can be stable with the solution of low concentration.

• 보존과학회지
• /
• 제35권4호
• /
• pp.269-277
• /
• 2019

Seaweed extracts, namely carrageenan obtained from Grateloupia elliptica and algin obtained from Laminaria, were employed as adhesive agents to synthesize solid adhesives for paper. Carrageenan from Grateloupia elliptica with the highest adhesive strength and lgin from Laminaria with the highest compressive strength was selected. The selected carrageenan and algin were mixed in a ratio of 7:3, and the mixture was employed as an adhesive agent. At a high temperature, sodium stearate(used as a solidifying material) oxidized the seaweed extracts. Consequently, carrageenan and algin were added to the final manufacturing process. The adhesive strength of the final synthesized solid adhesive is found to be 3.02 MPa and the compressive strength is found to be 30.5 N. Compared to the adhesive strength (2.95 MPa) and compressive strength (30.11 N) of commercial solid adhesives, the obtained results indicate superior adhesion characteristics. Furthermore, the proposed adhesive is environment-friendly because the presence of volatile organic compounds, formaldehyde, and heavy metals(such as chromium, lead, and cadmium) were not detected. Moreover, when used, the flatness of paper was twice that of commercial solid paper adhesives. Hence, the proposed adhesive can provide excellent adhesion, stability, and usability.