• Bulletin of the Korean Chemical Society
• /
• 제34권10호
• /
• pp.2968-2972
• /
• 2013

A highly efficient and environmentally benign protocol has been developed for the first time to produce a wide range of biologically active 5-hydroxyindole derivatives using montmorillonite KSF clay as a reusable solid acid catalyst. The use of recyclable clay makes this procedure quite simple, more convenient and cost-effective.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제4권2호
• /
• pp.95-102
• /
• 2000

Methane combustion over perovskite-type oxides prepared using the malic acid method was investigated. To enhance the catalytic activity, the perovskite oxides were modified by the substitution of metal into their A or B site. In addition, the reaction conditions, such as the temperature, space velocity, and partial pressure of the methane were varied to understand their effect on the catalytic performance. With the LaCoO3-type catalyst, the partial substitution of Sr or Ba into site A enhanced the catalytic activity in the methane combustion. With the LaBO3(B=Co, Fe, Mn, Cu)-type catalyst, the catalytic activities were exhibited in the order of Co>Fe Mn>Cu. Futhermore, the partial substitution of Co into site B enhanced the catalytic activity, whereas an excess amount of Co decreased the activity. The surface area and catalytic activity of the perovskite catalysts prepared using the malic acid method showed higher values than those prepared using the solid reaction method. The catalytic activity was enhanced with decreased methane concentration and with a decrease in the space velocity.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.244.2-244.2
• /
• 2010

Biological conversion of biomass into fuels and chemicals requires hydrolysis of the polysaccharide into monomeric sugars. In this study, dilute sulfuric acid used as a catalyst for the pretreatment of rapeseed straw. Hydrolysis can be performed enzymatically, and with dilute or concentrate mineral acids. Dilute-acid hydrolysis of rapeseed straw was optimized through the utilization of combined severity. Evaluation criteria for optimization of the pretreatment conditions were based on high xylose recovery and low inhibitor contents in the hydrolyzates. In addition, this paper reports the compositional analysis of hydrolyzate liquors and solid residues, xylose and glucose mass balance closures, and digestibility results of the acid pretreated rapeseed straw.

• 한국재료학회지
• /
• 제34권7호
• /
• pp.341-354
• /
• 2024

Today, the principles of green chemistry are being fundamentally applied in the chemical industry, such as the nitrobenzene industry, which is an essential intermediate for various commercial products. Research on the application of response surface methodology (RSM) to optimize nitrobenzene synthesis was conducted using a sulfated silica (SO₄/SiO₂) catalyst and batch microwave reactor. The nitrobenzene synthesis process was carried out according to RSM using a central composite design (CCD) design for three independent variables, consisting of sulfuric acid concentration on the silica (%), stirring time (min), and reaction temperature (℃), and the response variable of nitrobenzene yield (%). The results showed that a three-factorial design using the response surface method could determine the optimum conditions for obtaining nitrobenzene products in a batch microwave reactor. The optimum condition for a nitrobenzene yield of 63.38 % can be obtained at a sulfuric acid concentration on the silica of 91.20 %, stirring time of 140.45 min, and reaction temperature of 58.14 ℃. From the 20 experiments conducted, the SO₄/SiO₂ catalyst showed a selectivity of 100 %, which means that this solid acid catalyst can potentially work well in converting benzene to nitrobenzene.

• 한국응용과학기술학회지
• /
• 제18권1호
• /
• pp.40-48
• /
• 2001

Curing reaction was carried out with the acrylic resin (ACR) [n-butyl acrylate/atyrene/2-hydroxyethyl methacrylate/acetoacetoxyethyl methacrylate (AAEM)] synthesized before and a curing agent, hexamethoxymethylmelamine (HMMM). With rotational rheometer, the effect of catalysts on curing rate of acrylic resin/melamine was examined. Among the four catalysts used, p-toluene sulfonic acid showed the highest reactivity, and the optimum amount of catalyst was 0.5 phr. It was observed that in the ACR/HMMM curing reaction, gelation point was lowered with the increasing the amount of AAEM and HMMM in the ACR.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.512-512
• /
• 2009

본 연구는 자유지방산을 포함하고 있는 저품위 유지로부터 바이오디젤을 합성하는데 있어서 외부가열 방법 대신에 마이크로파를 이용한 내부 직접가열 방법으로 고체촉매 반응을 가속화한 연구에 관한 것이다. 대두유를 원료로 KOH 균일촉매를 이용한 전이에스테르화 실험에서는 섭씨 60도 상압조건에서 반응시간 3분에 95.4%의 전환율을 획득했다. 올레산과 고체산촉매를 이용한 자유지방산 제거 실험에서는 섭씨 60도 상압조건에서 solvent free 방식의 S-ZrO2는 반응시간 20분만에 93.7%의 제거율을 보였고 Rohm&Hass사의 Amberlyst-15dry 촉매는 반응시간 30분에 82.0%의 제거율을 보였다. 또한 바이오디젤 합성에 사용된 마이크로파의 총 에너지를 측정한 결과 외부가열 방법에 비해 약 1/3 수준임을 확인했다. 이것은 기존의 heat bath를 이용한 실험결과들과 비교할 때 반응속도가 약 10배 정도 향상되면서도 에너지효율이 높다는 것을 확인한 결과로서, 저품위 유지를 원료로 하는 바이오디젤 생산공정에서 마이크로파가 매우 효율적인 가열수단이 될 수 있음을 보여주었다.

• Bulletin of the Korean Chemical Society
• /
• 제19권4호
• /
• pp.466-470
• /
• 1998

Catalytic hydrogenation of carbon dioxide for the simultaneous synthesis of methanol and dimethyl ether (together called oxygenates) over a combination of methanol synthesis and methanol dehydration catalysts has been studied. Various methanol synthesis and methanol dehydration catalysts were examined for this reaction. The addition of promotors like $Ga_2O_3\; and\; Cr_2O_3$ to Cu/ZnO catalyst gave much more enhanced yield on the formation of oxygenates. From the results, the promotional effect of $Cr_2O_3$ has been explained in terms of increase in the intrinsic activity of Cu while that of $Ga_2O_3$ being increase in the dispersion of Cu. Among the methanol dehydration catalysts examined, the solid acids bearing high population of intermediate-strength acid sites were found to be very effective for the production of oxygenates. HY zeolite which contains strong acid sites produce small amount of hydrocarbons as by-products. However, CuNaY zeolite in which the presence of strong acid sites are minimum gives very high oxygenates yield without the formation of hydrocarbons.

• Korean Chemical Engineering Research
• /
• 제49권2호
• /
• pp.155-160
• /
• 2011

디메틸 에테르(DME)는 최근 청정 연료로서 주목을 받고 있다. 본 연구에서는 메탄올 탈수반응을 통한 디메틸 에테르(DME)의 제조에 대하여 조사하였다. 이때 촉매는 제올라이트 계열인 고체산 촉매를 이용하였다. 조촉매로서 세리아가 반응전환율뿐만 아니라 DME 생성 선택도도 증가시키는 것을 발견하였다. 실리카/알루미나의 조성비와 촉매 표면의 세리아의 무게함량을 변화시켜 최적의 촉매를 선정하였다. 5 wt%의 세리아가 첨가된 ZSM5-30의 DME에 대한 반응선택성이 가장 뛰어났으며, 이 촉매는 메탄올 내에 포함되어 있는 수분의 영향을 거의 받지 않았다. 마이크로 반응기에서 얻은 데이터를 가지고 반응 속도식을 구하였다.

• Bulletin of the Korean Chemical Society
• /
• 제28권8호
• /
• pp.1265-1272
• /
• 2007

A solid acid catalyst, NiSO4/CeO2-ZrO2 was prepared simply by promoting ZrO2 with CeO2 and supporting nickel sulfate on CeO2-ZrO2. The support of NiSO4 on ZrO2 shifted the phase transition of ZrO2 from amorphous to tetragonal to higher temperatures because of the interaction between NiSO4 and ZrO2. The surface area of 10-NiSO4/1-CeO2-ZrO2 promoted with CeO2 and calcined at 600 oC was very high (83 m2/g) compared to that of unpromoted 10-NiSO4/ZrO2 (45 m2/g). This high surface area of 10-NiSO4/1-CeO2-ZrO2 was due to the promoting effect of CeO2 which makes zirconia a stable tetragonal phase as confirmed by XRD. The role of CeO2 was to form a thermally stable solid solution with zirconia and consequently to give high surface area and acidity of the sample, and high thermal stability of the surface sulfate species. 10-NiSO4/1- CeO2-ZrO2 containing 1 mol% CeO2 and 10 wt% NiSO4, and calcined at 600 oC exhibited maximum catalytic activities for both reactions, 2-propanol dehydration and cumene dealkylation.

• Bulletin of the Korean Chemical Society
• /
• 제29권1호
• /
• pp.57-60
• /
• 2008

Catalytic oligomerization of isobutene to produce triisobutenes has been performed over a cation-exchange resin (Amberlyst-35) by using commercial C4 feeds. The catalytic activity in the oligomerization was retained without deactivation up to 90 h of reaction in a simulated reaction feed without butadiene, but its activity was significantly affected by the presence of butadiene in commercial C4 feeds. The isobutene conversion with time-on-stream was significantly decreased in the presence of butadiene, indicating the catalyst deactivation by butadiene. However, the stable activity for trimerization was accomplished when the oligomerization was carried out after eliminating butadiene by hydrogenation of the feeds. This work demonstrates that butadiene plays a role as a catalyst poison on the solid acid catalyst, so that its removal in the reactant feed is essential for practical application of trimerization.