• Nuclear Engineering and Technology
• /
• v.52 no.7
• /
• pp.1517-1523
• /
• 2020

The widely used medical isotope technetium-99 m (^99mTc) is a daughter of Molybdenum-99 (⁹⁹Mo), which is mainly produced using dedicated research reactors from the nuclear fission of uranium-235 (²³⁵U). ^99mTc has been used for several decades, which covers about 80% of the all the nuclear diagnostics procedures. Recently, the instability of the supply has become an important topic throughout the international radioisotope communities. The aging of major ⁹⁹Mo production reactors has also caused frequent shutdowns. It has triggered movements to establish new research reactors for ⁹⁹Mo production, as well as the development of various ⁹⁹Mo production technologies. In this context, a new research reactor project was launched in 2012 in Korea. At the same time, the development of fission-based ⁹⁹Mo production process was initiated by Korea Atomic Energy Research Institute (KAERI) in 2012 in order to be implemented by the new research reactor. The KAERI process is based on the caustic dissolution of plate-type LEU (low enriched uranium) dispersion targets, followed by the separation and purification using a series of columns. The development of proper waste treatment technologies for the gaseous, liquid, and solid radioactive wastes also took place. The first stage of this process development was completed in 2018. In this paper, the results of the hot test production of fission ⁹⁹Mo using HANARO, KAERI's 30 MW research reactor, was described.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.733-738
• /
• 2017

In this study, we selected chlorine, a typical toxic material used in many workplaces, as the leakage material, and through the analysis of alternative scenarios based on the meteorological conditions in the summer frequently encountered in accidents, we suggest ways to improve the (method of analysis/accident scenario modeling). The analysis of 296 chemical accidents from January 2014 to December 2016 found that the highest rate of occurrence was in summer, accounting for 35.81% of the total. According to the risk assessment, the influence range and number of inhabitants in the influence area were 712.4 m and 20,090 under the annual mean weather conditions and 796.2 m and 27,143 people under the summer mean weather conditions, respectively. This result implies that, under certain conditions, the range of impacts in the current alternative scenario is incomplete. Therefore, risk assessment systems need to be improved in order to take into consideration the characteristics of each chemical substance.

• Applied Biological Chemistry
• /
• v.29 no.1
• /
• pp.44-50
• /
• 1986

Two fractions of ${\beta}-glucanase$(CMCase), two fractions of filter paper degradation enzyme (FPase) and one ${\beta}-glucanase$ fraction were partially purified from Fusarium moniliforme and applied to recovery process of red bean starch. Red bean were incubated with the fractions of CMCase and FPase at $50^{\circ}C$ for 2 hours and the starch granules are separated. Maximal sedimentation rate of red bean starch granules was obtained with treatment of the mixture solution of 0.004 units/ml of FPase and 0.3 units/ml of CMCase. In the enzyme treated process percent recovery of red bean starch granule increased about 7% and suspended solid in waste water was reduced about 40%, compared with those of control. The results indicated that red bean cell treated with cellulase fractions absorbed water more rapidly and specific gravity of starch granule increased.

• Resources Recycling
• /
• v.30 no.4
• /
• pp.46-53
• /
• 2021

Biomass can be considered as chemical energy obtained from nature, and includes all living organisms such as plants, animals, and microorganisms. Biomass is eco-friendly, is easily obtainable from the environment, and can be recycled without special treatment processes. Biomass can also be converted into bioenergy fuel through pyrolysis and fermentation. Therefore, it has been considered as a renewable energy source, which prevents the depletion of natural resources such as fossil fuels. In this study, torrefaction to increase the carbon content in various types of biomass sources (sawdust, rice straw, rice bristles, coffee ground, and waste wood) was conducted under an inert atmosphere and at a temperature of 523~573K. The possibility of using torrefied biomass as an alternative to solid fuel for industrial purposes was analyzed by examining the carbon concentration and combustion behaviors.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.15 no.1
• /
• pp.171-177
• /
• 2007

In order to investigate the effect of the methanogenic bacteria in bacteria in leachate on the degradability of landfill waste, this study has created 4 cylinder-shape PVC lysimeters (Diameter: 30cm, Height: 200cm, Volume: 140L) and for the biological treatment and recirculation of the leachate, two anaerobic batch reactors (Diameter: 20cm, Height: 30cm) were created. To simulate a conventional landfill, no recycling was done in L1. In L2, 1,068ml of leachate (twice of rainfall amount) was recycled. In L3 and L4, the leachate was anaerobically digested in a dark room (with $35{\pm}1^{\circ}C$) for a week and them recycled by 1,064ml and 2,128ml, respectively, with recycled water only. In terms of cumulative $CH_4$ production, however, L3 and L4 were much higher (three times) than L1 and L2. Between L3 and L4, the latter was 1.23 times higher than the former in terms of cumulative CH4 production. In other words, the more the methanogenic bacteria-activated leachate is recycled, the more active the degradation due to active methane fermentation by the recyled methanogenic bacteria. And methane recovery is different according to the amount of recycled the methanogenic bacteria in leachate.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.3
• /
• pp.229-238
• /
• 2007

In this paper, structural design requirements and safety evaluation criteria of the spent nuclear fuel disposal canister are studied for deep geological deposition. Since the spent nuclear fuel disposal canister emits high temperature heats and much radiation, its careful treatment is required. For that, a long term(usually 10,000 years) safe repository for the spent nuclear fuel disposal canister should be secured. Usually this repository is expected to locate at a depth of 500m underground. The canister which is designed for the spent nuclear fuel disposal in a deep repository in the crystalline bedrock is a solid structure with cast iron insert, corrosion resistant overpack and lid and bottom, and entails an evenly distributed load of hydrostatic pressure from underground water and high pressure from swelling of bentonite buffer. Hence, the canister must be designed to withstand these high pressure loads. If the canister is not designed for all possible external loads combinations, structural defects such as plastic deformations, cracks, and buckling etc. may occur in the canister during depositing it in the deep repository. Therefore, various structural analyses must be performed to predict these structural problems like plastic deformations, cracks, and buckling. Structural safety evaluation criteria of the canister are studied and defined for the validity of the canister design prior to the structural analysis of the canister. And structural design requirements(variables) which affect the structural safety evaluation criteria should be discussed and defined clearly. Hence this paper presents the structural design requirements(variables) and safety evaluation criteria of the spent nuclear fuel disposal canister.

• Resources Recycling
• /
• v.7 no.3
• /
• pp.52-57
• /
• 1998

The objective of this study was to investigate the effect of cow manure as additive material on the ripening of sewage s sludge for vermistabiJization. The changes of the waste properties by ripening for 50days were observed as a function of the v various mixture ratios of sewage sludge ‘and cow manure. The pH values of the mixture wastes decreased from 7.5-7.67 to 6_ 9~7.2 by the ripening for 50days, and the mixture ratio made dIfferent pH values. The initial value of oxidation-reduction p potential (Eh) of the mixture waste was a negative (-) value indicating an unfavorable condition for earthworm after, but the v values of Eh increased with the opening time. The Increase rate at Eh value was prop$\alpha$rtional to the mixture ratio of cow m manure. The value of alkalinity was also changed into the favorable range for earthworm after 50days except for non-use of 1 the cow manure When the mixture ratio of the cow manure increased from 10% to 30%, the growth of earthworms increased h from 63.7% to 88.3 % tor the survival rate, 265% to 321% for the liveweight increasing rate and 66.7_7% to 91% for hatching f rate of the cocoons. It can be concluded that the proper content of tbe cow manure in the sewage sludge to ensure effective v vermistabilization was over 20%, when the mixture was ripened during 50 days. The quantity of ingestion and 며ectian at 20%-30% was found to be O.15--i.L18g sludge and 0 1l--O.14g solid per capacity earthworm per day, respectively.

• Resources Recycling
• /
• v.15 no.5 s.73
• /
• pp.47-51
• /
• 2006

The total amount of ash generated from the municipal solid waste incineration(MSWI) in Korea was approximately 420,000 tons in 2005 including 68,000 tons of fly ash. Fly ash from MSWI generally contains high amount of CaO (upto ${\sim}50%$) due to the treatment of flue gas by spraying CaO-base materials. Currently, most of fly ash generated is finally ended up with specially designed landfill sites and only less then 20% of fly ash is recycled. In the present work, preparation of $CaCO_3$ from the MSWI ny ash was studied to promote the fly ash recycling. Fly ash obtained from the dust collector in stoker-type MSWI is used to selectively dissolve CaO by using the sugar solution. Then, $CO_2$ gas was passed through the dissolved solution to pro- duce $CaCO_3$ powder. The optimum conditions for CaO dissolution were solid content 10%, reaction time 15 minutes, sugar concentration $10{\sim}15%\;and\;pH\;10.5{\sim}11.0$. The high grade $CaCO_3$ powder was obtained and the experimental conditions are also discussed.

• Journal of Animal Environmental Science
• /
• v.16 no.1
• /
• pp.51-60
• /
• 2010

This experiment was conducted to investigate the effects of concentrated pig slurry separated from membrane filter and by environment-friendly agro-materials mixtures on growth of lettuce in hydroponics. The swine waste treatment system having a ultra filtration and a reverse osmosis process was designed in this study. Filtration of pig slurry was necessary to prevent the hose clogging in hydroponics. Primary separation using ultra filter was followed by concentration by RO (Reverse Osmosis). The concentrated pig slurry (CS) was mixed by five different environment-friendly agro-materials mixtures. The chemical nutrient solution was the solution of National Horticulture Research Station for the growth of lettuce. The concentration of nutrient solution in hydroponics was adjusted a range of 1.5 mS/cm in EC. The concentrated pig slurry was low in phosphorus(P), suspended solid and heavy matal, but rich in potassium (K). The concentrated slurry was lowest in the growth characteristics of leaf lettuce. And also SPAD value in leaf was reduced in plot treated with concentrated slurry. But the growth of lettuce in the mixtures plot (CS+BM+AA, CS+BM+AA+SW) in hydroponics was significantly high compared to concentrated slurry. The fresh yield of lettuce was 78, 84% that of nutrient solution as 131.9, 142.2g in plot of CS+BM+AA and CS+BM+AA+SW, respectively. Our studies have shown that it is possible to produce organic culture using concentrated slurry and environment-friendly agro-materials mixture, although growth is slower than when using a conventional inorganic hydroponic solution.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.2
• /
• pp.57-65
• /
• 2008

Wastewater containing strong organic matter is very difficult to treat by utilizing general sewage treatment plant. but the wastewater is adequate to generate biomass energy (bio-gas; methane gas) by utilizing anaerobic digestion. EcoDays Plug Flow Reactor (E-PFR), which was already proved as an excellent aerobic wastewater treatment reactor, was adapted for anaerobic food wastewater digestion. This research was performed to improve the efficiency of bio-gas production and to optimize anaerobic wastewater treatment system. Food wastewater from N food waste treatment plant was applied for the pilot scale experiments. The results indicated that the efficiency of anaerobic wastewater treatment and the volume of bio-gas were increased by applying E-PFR to anaerobic digestion. The structural characteristics of E-PFR can cause the high efficiency of anaerobic treatment processes. The unique structure of E-PFR is a diaphragm dividing vertical hydraulic multi-stages and the inversely protruded fluid transfer tubes on each diaphragm. The unique structure of E-PFR can make gas hold-up space at the top part of each stage in the reactor. Also, E-PFR can contain relatively high MLSS concentration in lower stage by vertical up-flow of wastewater. This hydraulic flow can cause high buffering capacity against shock load from the wastewater in the reactor, resulting in stable pH (7.0~8.0), relatively higher wastewater treatment efficiency, and larger volume of bio-gas generation. In addition, relatively longer solid retention time (SRT) in the reactor can increase organic matter degradation and bio-gas production efficiency. These characteristics in the reactor can be regarded as "ideal" anaerobic wastewater treatment conditions. Anaerobic wastewater treatment plant design factor can be assessed for having 70 % of methane gas content, and better bio-gas yielding and stable treatment efficiency based on the results of this research. For example, inner circulation with generated bio-gas in the reactor and better mixing conditions by improving fluid transfer tube structure can be used for achieving better bio-gas yielding efficiency. This research results can be used for acquiring better improved regenerated energy system.