• Journal of Mechanical Science and Technology
• /
• 제14권10호
• /
• pp.1159-1167
• /
• 2000

Particles in liquid-solid suspension flow might enhance or suppress the rate of heat transfer and turbulence depending on their size and concentration. The heat transfer characteristics of liquid-solid suspension in turbulent flow are not well understood due to the complexibility of interaction between solid particles and turbulence of the carrier fluid. In this study, the heat transfer coefficients of liquid-solid mixtures are investigated using a double pipe heat exchanger with suspension flows in the inner pipe. Experiments are carried out using spherical fly ash particles with mass median diameter ranging from 4 to $78{\mu}m$. The volume concentration of solids in the slurry ranged from 0 to 50% and Reynolds number ranged from 4,000 to 11,000. The heat transfer coefficient of liquid-solid suspension to water flow is found to increase with decreasing particle diameter. The heat transfer coefficient increases with particle volume concentration exhibiting the highest heat transfer enhancement at the 3% solid volume concentration and then gradually decreases. A correlation for heat transfer to liquid-solid flows in a horizontal pipe is presented.

• 한국정밀공학회지
• /
• 제18권9호
• /
• pp.156-164
• /
• 2001

Two-dimensional solidification analysis during rheology forming process of semi-solid aluminum alloy has been studied. Two-phase fluid flow model to investigate the velocity field and temperature distribution is proposed. The proposed mathematical model is applied to the die shape of the two types. To calculate the velocity and temperature fields during rheology forming process, the earth governing equation correspondent to the liquid and solid region are adapted. Therefore, each numerical models considering the solid and liquid region existing within the semi-solid material have been developed to predict the deflect of rheology forming gnarls. The Arbitrary Boundary Maker And Cell (ABMAC) method is employed to solve the two-phase flow model of the Navier-Stokes equation. Theoretical model on the basis of the two-phase flow model is the mixture rule of solid and liquid phases. This approach is based on the liquid and solid viscosity. The liquid viscosity is pure liquid state value, however solid viscosity is considered as a function of the shear rate, solid fraction and power law curves.

• 대한기계학회논문집A
• /
• 제26권10호
• /
• pp.1971-1981
• /
• 2002

Two-dimensional solidification analysis during rheology forming process of semi-solid aluminum alloy has been studied. Two-phase flow model to investigate the velocity field and temperature distribution is proposed. The proposed mathematical model is applied to the die shape of the two types. To calculate the velocities and temperature fields during rheology forming process, the each governing equations correspondent to the liquid and solid region are adapted. Therefore, each numerical model considering the solid and liquid coexisting region within the semi-solid material have been developed to predict the defects of rheology forming parts. The Arbitrary Boundary Maker And Cell(ABMAC) method is employed to solve the two-Phase flow model of the Navier-Stokes equation. Theoretical model basis of the two-phase flow model is the mixture rule of solid and liquid phases. This approach is based on using the liquid and solid viscosity. The Liquid viscosity is pure liquid state value, however solid viscosity is considered as a function of the shear rate, solid fraction and power law curves.

• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.737-744
• /
• 2021

An investigation is conducted to study a solid-liquid mixture vertically upward hydraulic transport of solid particles by non-Newtonian fluids in the Mud system. Rheology of particulate suspensions in viscoelastic fluids is of importance in many applications such as particle removal from surfaces, transport of proppants in fractured reservoir and cleaning of drilling holes, etc. In this study a clear acrylic pipe was used in order to observe the movement of solid particles. Annular velocities varied from 0.4 m/s to 1.2 m/s. The mud systems which were utilized included aqueous solution of sodium carboxymethyl cellulose (CMC) solutions. Main parameters considered in the study were inner-pipe rotary speed, fluid flow regime and particle injection rate. Solid volumetric concentration and pressure drops were measured for the various parameters such as inclination angle, flow rate, and rotational speed of inner cylinder.

• Asian-Australasian Journal of Animal Sciences
• /
• 제5권3호
• /
• pp.571-582
• /
• 1992

Soybeans were dry extruded at three different temperatures (125, 135 and $145^{\circ}C$) for 30 s. Four lambs fitted with cannulae in the rumen and abomasums were used in a balanced $4{\times}4$ Latin square design. Lambs were fed at 2 h intervals for 12 times a day with automatic feeder to maintain steady state conditions in digestive tract. A dual-phase marker system was used to estivate ruminal flow rate of both liquid and solid digesta. Objectives of this study were to determine the effect of extrusion temperature of raw soybean on the ruminal liquid and solid dilution rate, nitrogen digestion and flow at the abomasum and availability of amino acid in lambs. There were no significant effects of extrusion on liquid and solid dilution rate, and liquid volume. Ruminal liquid flow rate was not influenced by extrusion and ranged from 389 to 435 ml/hr. Extrusion had no influence on ruminal OM digestion and flow rate to the abomasums. Dietary N flow to the abomasums increased (p < 0.05) as extruding temperature increased. Extruding temperature had a significant effect (p < 0.05) on flow of N escaping ruminal degradation and ranged from 34.91 to 57.38%. Microbial N synthesized/kg OMTDR ranged from 27 to 37 g and highest with $145^{\circ}C$ ESB diet. Extrusion decreased the amount of degradable amino acid in the rumen and increased the supply of amino acid to the lower gut, especially with 135 and $145^{\circ}C$ ESB diets.

• Korean Chemical Engineering Research
• /
• 제54권4호
• /
• pp.527-532
• /
• 2016

감압상태(1torr)의 순환유동층 플라즈마 반응기(내경 10 mm, 높이 800 mm)에서 기상 유속과 고체순환속도가 축방향 고체체류량 분포에 미치는 영향을 연구하였다. 폴리스타이렌 고분자 입자와 질소가스를 고체 및 기상 물질로 각각 사용하였다. 감압상태 순환유동층의 고체 순환량 변화는 상승관의 많은 기체 유량(40~80 sccm)에 의한 변화만큼 고체재순환부의 작은 유량 변화(6.6~9.9 sccm)에 의해서도 가능하였다. 감압상태 순환유동층의 고체 순환속도는 재순환부 기체 유속에 따라 증가하였다. 상승관내의 축방향 고체 체류량 분포는 하부의 농후상 영역에서 상부의 희박상 영역까지 높이에 따라 감소하는 형태를 나타내었다. 상승관 내 각 높이에서 고체순환속도의 증가에 따라 직선적으로 고체 체류량이 증가하였다. 이로써 플라즈마 형성과 유지 그리고 플라즈마 반응을 위해 적절한 플라즈마 로드 위치를 결정할 수 있다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제24회 춘계학술대회논문집
• /
• pp.53-56
• /
• 2005

하이브리드 로켓은 기존의 고체, 액체 로켓에 비하여 많은 이점을 가지고 있다. 본 연구에서는 선회류 하이브리드 로켓을 설계 및 제작하여 regression rate의 증진 방안을 모색하고자 하였다. 산화제 선회강도의 변화에 따라 연소실 압력을 측정하여 추력을 계산하였으며, 연소과정의 가시화를 통해 근사적 regression rate를 측정하였다. 또한 하이브리드 로켓 시험 중 발생할 수 있는 문제점과 해결 방안도 제시하였다.

• Journal of Biosystems Engineering
• /
• 제23권5호
• /
• pp.481-490
• /
• 1998

A computer vision system to measure low flow rate of solid particles was developed and tested to examine its performance with various sized 7 kinds of seeds, perilla, mung bean, paddy, small red bean, black soybean, Cuba bean and small potato tuber. The test was performed for two types of particle flow, continuous and discontinuous. For the continuous flow tested with perilla, mung bean and paddy, the tests resulted correlation coefficients for the flow rates measured by the computer vision and direct method about 0.98. Average errors of the computer vision measurement were in a range of 6∼9%. For the discontinuous flow tested with small red bean, black soybean, Cuba bean and small potato tuber, the tests resulted correlation coefficients for the flow rates measured by the computer vision and direct method 0.98∼0.99. Average errors of the computer vision measurement were in a range of 5∼10%. Performance of the computer vision system was compared with that of the conventional optical sensor to count particles in discontinuous flow. The comparison was done with black soybean, Cuba bean and small potato tuber, and resulted that the computer vision has much better performance than the optical sensor in a sense of precision of the measurement.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.777-781
• /
• 1997

In this study, the effect of strain-rate and inital solid fraction on the deformation behaviour of semi-solid material is investigated, when semi-solid forging is performed by the process of closed-die compression using A356 alloy of which the above results can be practically applied for industrical purpose. In order to simulate densification in the deformation of semi-solid material, the semi-solid material is assumed to be composed of solid region following rigid visco-plastic material, the liquid region following Darcy's law for the liquid flow saturated in the interstitial space. Simulation results of closed-die compression and simple upsetting under different strain-rate and initial solid fraction are compared.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권5호
• /
• pp.582-589
• /
• 2011

선박에서 배출되는 온실가스를 저감하기 위한 기술로 연료전지 기술이 고려되어지고 있다. 본 연구에서는 메탄을 연료로 사용한 내부개질형 500kW급 고체산화물형 연료전지의 선박 적용을 가정한 연료전지 시스템을 모델링하여 시스템의 구성에 따른 공기, 메탄, 물의 공급 유량 및 시스템 운전 압력이 연료전지 스택의 입구 및 출구에서의 가스 온도, 스택 출력 및 시스템 효율 등에 미치는 영향에 관하여 검토하였다. 그 결과 공기와 메탄의 공급 유량이 연료전지 스택 입구 및 출구 가스 온도에 직접적인 영향을 주었다. 공기와 물의 공급 유량이 증가하면 스택 출력 및 시스템 효율이 증가하고, 메탄의 경우 스택 출력은 증가하나 시스템 효율은 낮아진다.