• 대한기계학회논문집A
• /
• 제41권7호
• /
• pp.665-671
• /
• 2017

알칼리금속을 이용한 열전기변환장치(Alkali-Metal Thermal-to-electric Converter)는 열을 전기로 직접 변환하는 기술이다. AMTEC 기술은 기존 에너지기술 대비 고효율성과 고밀도성을 지니는 정적 에너지 변환 장치로서 이론 발전효율이 40%로 높고 단위발전량이 500 W/kg, $2.01W/cm^2$로 우수하다. AMTEC의 작동원리는 작동유체인 소듐이 분압차이에 의해서 고체전해질인 베타알루미나(BASE)의 내부에서 외부로 이온화를 거쳐며 통과하는데, 이때 전자를 주고 받으며 전기를 생성한다. BASE내외부의 분압차 형성을 위해서는 고온내구성과 기밀성이 높은 접합기술이 요구된다. 개발된 접합기술을 이용하여BASE/절연부/금속부 시스템의 안정적인 전기적/구조적 시스템을 구성하고 멀티-셀 모듈들을 제작하여 개방회로 전압과 전류-전압특성을 측정하는 방법으로 AMTEC 모듈전지들의 출력성능과 수명을 평가하였다.

• 한국임상수의학회지
• /
• 제25권3호
• /
• pp.187-191
• /
• 2008

A 7-year-old, intact female Yorkshire terrier dog was presented for coughing, anorexia, chest pain and dyspnea. Right lateral thoracic radiograph demonstrated a large mass shape on the heart base with decreased cardiac silhouette and severe right deviation of the trachea with the heart shifted to the left thoracic wall was observed on the ventrodorsal thoracic projection. Echocardiographic examination revealed a large rounded mass compressing left atrium around the heart base without signs of pericardial effusion. On computed tomographic (CT) findings, sagittal CT images depicted the possibility of cranial vena caval invasion and heart base involvement of the mass associated with biatrial compression. Dorsal CT image revealed the right deviation of trachea due to the heart base mass and markedly shrunk lung space was detected on the transverse CT image. Because the dog suddenly had died during the recovery from anesthesia after finishing CT scan, necropsy was performed. On gross findings, a large and lobulated mass was located at the base of the heart. A poorly-demarcated, infiltrative, multilobulated tumor composed of polyhedral cells in solid cellular sheets was confirmed based on histopathologic examination. This dog was diagnosed as a chemodectoma. This case report describes the clinical findings, diagnostic consistency of thoracic radiography, echocardiography and CT, and histopathologic confirmation in a spontaneously occurring chemodectoma with a Yorkshire terrier dog.

• Earthquakes and Structures
• /
• 제11권6호
• /
• pp.943-966
• /
• 2016

Recently, magnetorheological elastomer (MRE) material and its devices have been developed and attracted a good deal of attention for their potentials in vibration control. Among them, a highly adaptive base isolator based on MRE was designed, fabricated and tested for real-time adaptive control of base isolated structures against a suite of earthquakes. To perfectly take advantage of this new device, an accurate and robust model should be built to characterize its nonlinearity and hysteresis for its application in structural control. This paper first proposes a novel hysteresis model, in which a nonlinear hyperbolic sine function spring is used to portray the strain stiffening phenomenon and a Voigt component is incorporated in parallel to describe the solid-material behaviours. Then the fruit fly optimization algorithm (FFOA) is employed for model parameter identification using testing data of shear force, displacement and velocity obtained from different loading conditions. The relationships between model parameters and applied current are also explored to obtain a current-dependent generalized model for the control application. Based on the proposed model of MRE base isolator, a second-order sliding mode controller is designed and applied to the device to provide a real-time feedback control of smart structures. The performance of the proposed technique is evaluated in simulation through utilizing a three-storey benchmark building model under four benchmark earthquake excitations. The results verify the effectiveness of the proposed current-dependent model and corresponding controller for semi-active control of MRE base isolator incorporated smart structures.

• 자원리싸이클링
• /
• 제16권6호
• /
• pp.39-45
• /
• 2007

황동 전구 base 제조과정에서 발생하는 황산폐수에 함유된 구리와 아연의 농도를 저감시키기 위해 중화법에 의한 최적조건을 조사하였다. 구리와 아연이 함유된 황산용액에 대해 화학반응과 물질수지를 고려하여 용액의 pH에 따른 구리와 아연의 농도분포와 용해도를 구하였다. 구리와 아연의 수산화물이 침전되는 pH영역에서 아연의 용해도가 구리의 용해도보다 크므로, 구리에 비해 아연의 제거율이 용액의 pH에 민감하였다. 응집제로 $Al_2(SO_4)_3$를 첨가하는 경우 아연의 제거율은 응집제의 첨가형태에 영향을 받지 않았으나, 구리의 경우에는 용액으로 첨가하는 것이 고체상태로 첨가하는 것보다 제거율이 높았다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.380-383
• /
• 2006

This study examines the influence factor of flanking transmission in the wall. Generally, there is the difference of airborne sound isolation between laboratory and field test. The purpose of this study is examing the cause of droping sound insulation performance in the field and searching the method of improving sound insulation performance. First, we measured the sound isolation in the wall at the lab. Then, we measured it in the field and compared them. At the base of these datum, we measured the flanking transmission and solid transmission. For the flanking transmission am the wall, we used intensive method. So, we found the influence of solid transmission.

• 한국분말재료학회지
• /
• 제2권2호
• /
• pp.165-170
• /
• 1995

Alloying behavior of nanocrystalline Al-Ti-(Si) composite powders via mechanical alloying (MA) has been investigated, and the effect of Si on the microstructural changes during MA was discussed. The microstructures of both MA powders and extruded compacts were examined. In Al-Ti system, the solid solutionized nanocrystalline powders could be obtained by MA. On the contrary, fine Si particles were embedded as an elemental state in the matrix of Al-Ti-Si system because of the brittleness and the negligible solid solubility of Si in Al. After hot extrusion, $Al3Ti$ phase was finely precipitated in Al-10fSTi alloy, and Si particles were dissolved to form $(Al, Si)_3Ti$ phase in Al-10%Ti-2%Si alloy.

• 대한기계학회논문집
• /
• 제17권7호
• /
• pp.1740-1750
• /
• 1993

The aluminar short fiber reinforced composite materials for hot extrusion were fabricated by semi-solid stirring method, and extruded at extrusion temperature $400^{\circ}C$ with various extrusion ratio. The hot extrusion load of volume fraction 15% metal matrix composites and base alloy Al7075 has been compared. The fiber length distribution, fiber breakage and fiber orientation are investiged to know the fiber behaviour in before and after hot extrusion. The tensile strength of the hot extruded billet are experimentally determined for different of extrusion ratios, and compared with theorically calculated strength.

• 한국분말재료학회지
• /
• 제1권1호
• /
• pp.60-65
• /
• 1994

When a commercial prealloyed Fe-powder(Fe-5Cr-lMo-2Cu-0.5P-3C) is liquid phase sintered at 116$0^{\circ}C$, liquid precipitates with various shapes form within solid grains during the initial stage of sintering. The shape of a liquid precipitate changes pith the increment of their size from sphere(with radius<0.3$\mu\textrm{m}$), a transient polyhedron with more than 7 faces(1~2 $\mu\textrm{m}$), cuboid(3~5 $\mu\textrm{m}$), and finally to sphere(>5 $\mu\textrm{m}$). The shapes of liquid precipitates closely resemble the growth shapes predicted on the basis of solid-liquid interfacial energy and the coherency strain energy with anisotropic elastic constants in the diffusion zone around the precipitates.

• 소성∙가공
• /
• 제8권5호
• /
• pp.437-448
• /
• 1999

The reheating of the billet in the semi-solid state as quickly and homogeneously as possible is one of the most imposrtant parts. To obtain a fine globular microstructure in cross section of billet, the optimal design of the induction coil for variation of alloys and specimen sizes is necessary. For the thixo-forging process the construction of the reheating data base is very important, because the reheating conditions are different for variation of SSM and billet sizes. So in this study, the optimal coil design of A356 (ALTHIX) and Aι2024 with d×ι=60×90 (mm) to obtain the globular microstructure is theoretically proposed. The suitability of an optimal coil design will be demonstrated by reheating experiments. Finally, the thixoformability of an arbitrarily shaped product is evaluated by its forming variables. The defects and mechanical properties are also investigated.

• 한국소음진동공학회논문집
• /
• 제17권2호
• /
• pp.143-148
• /
• 2007

This study examines the influence factor of flanking noise in the wall. Generally, there is the difference of airborne sound isolation between laboratory and field test. The purpose of this study is examing the cause of droping sound insulation performance in the field and searching the method of improving sound insulation performance. First, we measured the sound isolation in the wall at the lab. Then, we measured it in the field and compared them. At the base of these datum, we measured the flanking noise and solid transmission. For the flanking noise in the wall, we used intensive method. So, we found the influence of solid transmission.