• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.235-236
• /
• 2006

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.971-972
• /
• 2008

• 한국응용과학기술학회지
• /
• 제15권4호
• /
• pp.57-62
• /
• 1998

In this study, a new conducting materials, namely, a Schiff base (polymeric azomethine) was synthesized from 2,6-diamino-N-docosyl pyridinium bromide and terephthalaldehyde to obtain a soluble and fusible conducting polymer. The synthesized Schiff base structure was analyzed by using UV/vis absorption spectrophotometer, FT-IR spectrometer and $^1H$-NMR spectrometer. It was found that the Schiff base was successfully synthesized and soluble in carbon tetrachloride$(CC^{14})$, its Langmuir-Blodgett film was easily fabricated, and its surface pressure was determined to be 30mN/m for solid state by measuring ${\pi}$-A isotherm.

• 펄프종이기술
• /
• 제47권2호
• /
• pp.9-16
• /
• 2015

High loading of base paper is regarded as one of reasons to aggravate fold cracking of coated paper. But the relationship between the ash content of base paper and fold cracking of coated paper has not been shown yet. We investigated the effect of ash content in base paper on the fold cracking of coated paper. Handsheets with three different ash contents (19.5-23.5%) were prepared, and double layered coating were applied on the top side of the handsheets. A gravimetric water retention meter (AA-GWR) was employed to fold the paper with a uniform pressure after solid printing on the coated surface. The fold cracking was digitized by calculating the cracked area by means of an image analysis technique. Results suggested that high ash content in the base paper increased the fold cracking of the outer surface of coated papers. In the case of inner surface greater fold crack areas were obtained, and the number of cracks decreased because long and wide cracks were formed. Reduction in tensile strength and thickness appeared to give greater fold cracking for highly loaded papers.

• Journal of Korean Neurosurgical Society
• /
• 제43권3호
• /
• pp.165-168
• /
• 2008

The location of ganglioglioma (GG) within the infratentorial compartment is unusual. The authors report a rare case of GG in the cerebellar hemisphere. A 12-year-old boy suffered from headache and gait disturbance. Neuroimaging studies demonstrated a large enhancing cerebellar mass with cystic components compressing the forth ventricle. After complete resection of the tumor, the patient became symptom free. Histological examination on the tumor disclosed glial cells and dysplastic ganglion cells. Although it is a rare tumor, in the appropriate clinical setting, a GG should be considered in the presence of a cerebellar mass with both solid and cystic components on magnetic resonance images in children.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.139-142
• /
• 2004

Nickel base superalloys are widely used for high temperature applications due to heat resisting capability and corrosion resistance at high temperatures. Superalloys with many strengthening alloying elements are frequently used in powder form to alleviate harmful effects of alloy segregation. HIP (hot isostatic pressing) and DB (diffusion bonding) as a form of solid-state bonding process is used to make turbine components, such as integrated turbine rotors. HIP/DB process requires many technical overcomes related to dimensional changes as well as microstructural control. In this research, HIP/DB process for nickel base superalloys, Udimet 720 and MM 247, were investigated with a view to control the dimensional change during the consolidation process. Simple disc-shaped cans were used to select the conceptual die design for the control of the dimensional change especially in radial direction. The change in the shape of consolidated shape was investigated using commercial FE code with constitutive equations fur low temperature plasticity deformation.

• Bulletin of the Korean Chemical Society
• /
• 제25권9호
• /
• pp.1309-1313
• /
• 2004

A simple and reliable method has been developed to selectively separate and concentrate trace amounts of thallium ion from real samples for the subsequent measurement by flame atomic absorption spectrometry (FAAS). Thallium ions are absorbed quantitatively during passage of aqueous real samples through an octadecyl bonded silica membrane disk modified by 4-(4-Chloro-phenylazo)-2-[(4-hydroxy-phenylamino)-methyl]-phenol. The retained $Tl^+$ ions are then stripped from the disk quantitatively with a minimal amount of thiosulfate solution as eluent. The proposed method permitted large enrichment factors of about 130 and higher. The relative standard deviation for ten replicate extraction of thallium from 1 L samples containing 5 ${\mu}g$ thallium is 1.2%. The break through volume for 5 ${\mu}g$ thallium is 1000 mL. The limit of detection of the proposed method is 11.2 ng of $Tl^+$ per 1000 mL. The effects of various cationic interferences on the recovery of thallium in binary mixtures were studied. The method was applied to the recovery of $Tl^+$ ions from natural water and human hair samples.

• 현장농수산연구지
• /
• 제23권1호
• /
• pp.39-48
• /
• 2021

In this study, characteristics of solid-state fermentation distilled spirits with nuruk (fermentation starter) and sorghum were investigated. The starch digestion activity was highest in black koji (A. usamii) at 359.15 U/g dry base, white koji (A. luchuensis) at 306.98 and yellow koji (A. oryzae) at 15.31 was followed. The pH of the solid-state fermented mash in yellow, white and black koji showed 5.09, 4.46 and 4.50 respectively with significant differences (p<0.001). The total acid content of white and black koji was 0.73% as citric acid. The alcohol content of mash prepared with yellow, white and black koji was 4.34, 4.24, 3.89% respectively. The contents of reducing sugar showed 3.28, 3.23 and 2.64%. Total sugar were 14.88, 17.84 and 17.60% respectively. The alcohol content of each distillate ranged from 44.3 to 39.9%, and the furfural content in yellow koji was 1.25 times lower than the others.

• 한국재료학회지
• /
• 제4권6호
• /
• pp.611-619
• /
• 1994

본 연구는 Lithium Alumino Silicate 기본계에 핵형성제로 $TiO_{2}$와 $ZrO_{2}$를 사용하여 기본유리를 제조하고 열처리에 따른 $\beta$-quartz고용체의 미결정 형성과정을 분석하였다. 또한 $\beta$-quartz고용체의 형성에 따른 열적 특성과 광학적 특성을 비교하였다. 그 결과, 기본 유리의 열팽창 계수는 $45\sim 55 \times 10^{-7} \textrm{cm}/^{\circ}C$였으며, 결정화 시편의 열팽창 계수는$ -8\sim +8 \times 10^{-7}\textrm{cm}/^{\circ}C$ ($25^{\circ}C \sim 525^{\circ}C$)였다. $900^{\circ}C$이하에서 열처리된 Glass Cermics의 결정은 $\beta$-quartz 고용체가 형성되었고, 결정의 크기가 0.21$\mu \textrm{m}$를 초과하지 않았으며, 최고의 투광도는 80%이상을 나타냈다. RO성분을 MgO와 ZnO를 사용한 경우보다 MgO 단독으로 사용한 시편을 결정입자의 크기가 온도에 의존하지 않고 일정함을 나타냈으며, ZnO의경우는 입자의 크기가 최소값(0.18$\mu \textrm{m}$)을 보이며 온도의존성이 크게 나타냈다.

• 한국분말재료학회지
• /
• 제23권3호
• /
• pp.247-253
• /
• 2016

In this study, solid solution heat treatment of consolidated nickel-based superalloy powders is carried out by hot isotactic pressing. The effects of the cooling rate of salt quenching, and air cooling on the microstructures and the mechanical properties of the specimens are analyzed. The specimen that is air cooled shows the formation of serrated grain boundaries due to their obstruction by the carbide particles. Moreover, the specimen that is salt quenched shows higher strength than the one that is air cooled due to the presence of fine and close-packed tertiary gamma prime phase. The tensile elongation at high temperatures improves due to the presence of grain boundary serrations in the specimen that is air cooled. On the contrary, the specimen that is salt quenched and consists of unserrated grain boundaries shows better creep properties than the air cooled specimen with the serrated grain boundaries, due to the negative creep phenomenon.