• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.61-65
• /
• 2018

In this study, the conversion of glucosamine, which is a major monomer in chitin/chitosan of crustacean shell, using solid acid catalyst was performed to obtain chemical intermediates such as levulinic acid and 5-hydroxymethyl furfural (5-HMF). The conversion reaction was optimized with four reaction factors of selection of ionic resin catalyst, reaction temperature, catalyst amount, and reaction time. As an optimized result, the highest levulinic acid yield was achieved approximately 36.86% under the determined conditions (Amberlyst 15 as a solid-acid catalyst, $180^{\circ}C$, 5% catalyst amount and 60 min). On the other hand, 5-HMF yield was found to be 0.91% at the condition.

• Journal of the Korean Society of Food Culture
• /
• v.11 no.3
• /
• pp.385-392
• /
• 1996

The soluble solid of red pepper was extracted by water in order to investigate changes of soluble solid content by different extraction temperature $(4{\sim}90^{\circ}C)$ and time $(1/2{\sim}3\;hrs)$, and the contents of carotenoid, capsaicinoids, free sugar, organic acid, free amino acid in soluble solid were measured. Most of soluble solid in red pepper was extracted within the first 2 hrs and $93{\sim}98%$ of total soluble solid was extracted during the first 30 min. The contents of carotenoid increased by increasing extraction time and temperature, but decreased by increasing extraction time at $60^{\circ}C$ and $90^{\circ}C$. ${\beta}$-carotene content was sharply decreased after 2 hrs at $90^{\circ}C$. The content of capsaicinoid was sharply increased between 1 hr and 2 hr. Fructose and glucose in red pepper were extracted in the range of $83.8%{\sim}96.4%$ and the contents of free sugar gradually increased by increasing extraction time and temperature. The content of organic acid was gradually increased by increasing extraction time and temperature and the greatest amount of organic acid was extracted during the first 30 min of extraction time. The content of free amino acid was decreased by increasing extraction temperature.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.347-347
• /
• 2006

Polymers containing poly(vinyl phosphonic) acid segments are promising candidates to be used as proton conducting membranes. Solid state NMR spectroscopy represents an ideal probe of proton motion on the molecular level, because it allows us to selectively detect the nuclei of interest. In this paper, we apply solid state NMR methods to poly(vinyl phosphonic) acid in order to demonstrate that the proton conduction of poly(vinyl phosphonic acid) results from P-OH proton through hydrogen bonding and that the condensation of phosphonic acid leads to decrease in proton conductivity. $^{1}H\;and\;^{31}P$ solid state NMR experiments are supported by quantum chemical computation of NMR parameters.

• Journal of the Korean Ceramic Society
• /
• v.29 no.5
• /
• pp.396-402
• /
• 1992

Carbon solid was prepared from dormant mesophase pitch (DMPP) without using a binder and its properties were characterized. DMPP powder was stabilized with air or nitric acid in pretreatment stage so that it might not soften in later heat ttreatment stage. Optimum sintering properties were obtained from carbon powder with 2.36∼2.38 of C/H atomic ratio and 1.27∼1.40 of C/O atomic ration in air stabilization. In nitric acid stabilization, optimum sintering properties were obtained when 20∼40 vol.% of nitric acid solution was used. Compressive strength increased up to 1200$^{\circ}C$ of heat treatment temperature, and the highest compressive strength and bulk density of carbon solid from DMPP were 3000 kgf/㎤, respectively. The optical properties of carbon solid obtained was fine mosaic structure. Carbon solid after graphitization showed the properties of hard carbon due to stabilization and its shore hardness was 120.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.12
• /
• pp.1929-1931
• /
• 2004

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.1
• /
• pp.1-11
• /
• 2013

In this study, we investigated chemical characteristics of solid residues obtained from inorganic acid hydrolysis of hybrid poplar (Populus alba ${\times}$ glandulosa). Different concentration (72, 36, 18%) of sulfuric acid and hydrochloric acid were used for first hydrolysis step and second hydrolysis step were carried out after equally dilution to 4%. Solid residues after consecutive two step hydrolysis were named to RS72 (Residue from Sulfuric acid 72%), RS36, RS18, as well as RC36 (Residue from hydroChloric acid 36%) and RC18, respectively. The yield of RS decreased from 71.2% to 21.4% with increasing sulfuric acid concentration in the first hydrolysis step, whereas that of RC showed little difference (67.0% to 65.0%), irrespective of hydrochloric acid concentration. The lignin content in solid residue was 23.6% for both of RS36 and RS18, 25.6% for RC36 and 27.3% for RC18, respectively. The results of pyrolyzer-GC/MS showed that 24 cellulose derivatives (Levoglucosan, Furfural) and 21 lignin derivatives (Guaiacol, Syringol) were detected. Thermogravimetric analysis indicated that the yield of char increased and maximum wieght loss rate decreased with increasing lignin portion of solid residue. Therefore, structure of lignin was condensed effectively by sulfuric acid and by high concentration of acid.

• Journal of Pharmaceutical Investigation
• /
• v.31 no.3
• /
• pp.167-172
• /
• 2001

All-trans retinoic acid (ATRA), vitamin A acid, has been shown to exert anticancer activity in a number of types of cancers, particularly in acute promyelocytic leukaemia (APL). Due to its highly variable bioavailability and induction of its own metabolism after oral treatment, development of parenteral dosage forms are required. However, its poor aqueous solubility and chemical unstability give major drawbacks in parenteral administration. This study was undertaken to investigate a possibility to develop a parenteral formulation of ATRA by employing solid lipid nanoparticle (SLN) as a carrier. By optimizing the production parameters and the composition of SLNs, SLNs with desired mean particle size (<100 nm) as a parenteral dosage form could be produced from trimyristin (as solid lipid), Egg phosphatidylcholine and Tween 80 (as SLN stabilizer). The mean particle size of SLN formulation of ATRA was not changed during storage, suggesting its physical stability. Thermal analysis confirmed that the inner lipid core of SLNs exist at solid state. The mean particle size of ATRA-loaded SLNs was not significantly changed by the lyophilization process. ATRA could be efficiently loaded in SLNs, while maintaining its anticancer activity against HL-60, a well-known APL cell line. Furthermore, by lyophilization, ATRA loaded in SLN could be retained chemically stable during storage. Taken together, our present study demonstrates that physically and chemically stable ATRA formulation adequate for parenteral administration could be obtained by employing SLN technology.

• Korean Chemical Engineering Research
• /
• v.53 no.4
• /
• pp.478-481
• /
• 2015

In this study, the hydrolysis of green macro-algae Enteromorpha intestinalis using solid acid catalyst was conducted to obtain total reducing sugar. The hydrolysis was optimized with four reaction parameters of liquid-to-solid (L/S) ratio, catalyst amount, reaction temperature, and reaction time. As a optimized result, the highest TRS of 7.74 g/L was obtained under condition of 7.5 L/S ratio, $140^{\circ}C$, 15% catalyst amount and 2 hr. By the way, at this condition, only 0.13 g/L 5-HMF was detected. The solid acid-catalyzed hydrolysis of marine resources had the potential in the field of bioenergy.

• Macromolecular Research
• /
• v.13 no.3
• /
• pp.253-256
• /
• 2005

We prepared amino acid-derived diacetylene monomers using solid-phase organic synthesis. The solid-phase synthetic method allowed for the rapid and efficient preparation of functional diacetylenes. Amino acids having hydrophobic sidechains such as alanine, leucine, and phenylalanine, as well as hydrophilic sidechains such as aspartic acid and lysine, were successfully coupled to the diacetylene lipid. The diacetylene monomers prepared in this way were subjected to routine procedures for the generation of polydiacetylene vesicles. Depending on the nature of the side-chains, pink to blue colored polydiacetylenes were generated.

• Archives of Pharmacal Research
• /
• v.28 no.7
• /
• pp.756-760
• /
• 2005

Polyene macrolide amphotericin B (AmB) is the drug of choice for the treatment of disseminated fungal infections. However, because of its pronounced side effects, the drug has limited applicability. There are few interesting reports, which state that co-administration of the drug with homo-peptide of polyaspartic acid reduces the side effects of the drug. In our present study, an approach has been made to systematically synthesize low molecular weight heteropeptides consisting of L-aspartic acid and its derivative. It was hypothesized that such heteropeptides will reduce the toxic side effects of the drug by facile hydrophobic binding between the polymer and the drug. We have employed the strategy of solid phase peptide synthesis (SPPS) to synthesize low molecular weight hetero-peptides by using L-aspartic acid and benzyl-L-aspartic acid to induce the hydrophobic binding between the peptide and the drug. In future, the proposed methodology can be employed to tailor other polypeptides substituted with benzyl groups to reduce the nephrotoxicity of AmB.