• 한국산학기술학회논문지
• /
• 제6권6호
• /
• pp.468-472
• /
• 2005

유리병의 제조에 있어서 유리 융체가 금형 벽면에 부착하는 것을 방지하기 위하여 성형할 때마다 금형 내벽면을 윤활제로 도포하는 공정이 있다. 금형 벽면을 통기성이 있는 다공질 소결체로 제조하면 도포공정을 생략할 수 있다. 따라서 본 연구에서는 스테인리스 중에서 내열${\cdot}$내마모 특성이 가장 우수한 310L계 조대 분말($-150{\mu}m$) 및 420J2 계 미세 분말($40{\~}50{\mu}m$)을 사용, 유리 금형용 내벽면 재로서 가장 적합한 다공질 소결체(소결체의 밀도: $85{\~}90\%$)를 제작하기 위하여 성형압력, 소결 분위기, 소결온도 및 시간을 변화시켜 다음과 같은 결과를 얻었다. (1) 고상 소결로서는 입자 크기가 큰 310L분말을 가지고는 어느 경우에 있어서나, 목적하는 소결 밀도를 얻을 수 없었다. (2) $2ton/cm^2$의 성형압력으로 성형한 실형상 성형체를 양산용 진공($1300^{\circ}C$, 2시간) 소결로에서 소결한 결과, 소결체의 밀도는 $310L+0.03\%B$, 420J2, 420J2+(0.03, 0.06)$\%$B에서 각각 6.2(79$\%$), 6.6(86$\%$), 7.3(95$\%$), $7.6(99\%)g/cm^3$로 나타났다. 따라서, 420J2계 분말(저압성형) 및 310L+0.03$\%$B(고압성형)분말을 사용하여 진공 중 소결하면 목적하는 통기도를 가진 소결체를 제작할 수 있다는 것을 알았다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2001년도 추계학술강연 및 발표대회
• /
• pp.7-7
• /
• 2001

The increasing interest in light weight materials coupled to the need for cost -effective processing have combined to create a significant opportunity for aluminum P/M. particularly in the automotive industry in order to reduce fuel emissions and improve fuel economy at affordable prices. Additional potential markets for Al PIM parts include hand tools. Where moving parts against gravity represents a challenge; and office machinery, where reciprocating forces are important. Aluminum PIM adds light weight, high compressibility. low sintering temperatures. easy machinability and good corrosion resistance to all advantages of conventional iron bm;ed P/rv1. Current commercial alloys are pre-mixed of either the AI-Si-Mg or AL-Cu-Mg-Si type and contain 1.5% ethylene bis-stearamide as an internal lubricant. The powder is compacted in closed dies at pressure of 200-500Mpa and sintered in nitrogen at temperatures between $580~630^{\circ}C$ in continuous muffle furnace. For some applications no further processing is required. although most applications require one or more secondary operations such as sizing and finishing. These sccondary operations improve the dimension. properties or appearance of the finished part. Aluminum is often considered difficult to sinter because of the presence of a stable surface oxide film. Removal of the oxide in iron and copper based is usually achieved through the use of reducing atmospheres. such as hydrogen or dissociated ammonia. In aluminum. this occurs in the solid st,lte through the partial reduction of the aluminum by magncsium to form spinel. This exposcs the underlying metal and facilitates sintering. It has recently been shown that < 0.2% Mg is all that is required. It is noteworthy that most aluminum pre-mixes contain at least 0.5% Mg. The sintering of aluminum alloys can be further enhanced by selective microalloying. Just 100ppm pf tin chnnges the liquid phase sintering kinetics of the 2xxx alloys to produce a tensile strength of 375Mpa. an increilse of nearly 20% over the unmodified alloy. The ductility is unnffected. A similar but different effect occurs by the addition of 100 ppm of Pb to 7xxx alloys. The lend changes the wetting characteristics of the sintering liquid which serves to increase the tensile strength to 440 Mpa. a 40% increase over unmodified aIloys. Current research is predominantly aimed at the development of metal matrix composites. which have a high specific modulus. good wear resistance and a tailorable coefficient of thermal expnnsion. By controlling particle clustering and by engineering the ceramic/matrix interface in order to enhance sintering. very attractive properties can be achicved in the ns-sintered state. I\t an ils-sintered density ilpproaching 99%. these new experimental alloys hnve a modulus of 130 Gpa and an ultimate tensile strength of 212 Mpa in the T4 temper. In contest. unreinforcecl aluminum has a modulus of just 70 Gpa.