• 한국태양에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.273-278
• /
• 2009

The experimental study is performed to investigate the optimum design of the system dissipating properly heat from the in-situ solar panel installed on site. For this purpose, six 12-Watts panels, which are set at the different conditions of the solar panels contained phase change material, changing the array of the aluminum fin and honeycomb at the back of the panel, are tested. PCM, which has $44^{\circ}C$ melting point, is chosen in this study. In order to enhance the thermal heat from the absorbed heat in PCM, finned aluminum plate is placed. Furthermore, Aluminum honeycomb is imbedded in the back container to find if it would improve the thermal conductivity of PCM. As a result, the solar panel, which is combined with honeycomb and outward fins with PCM instead of placing the fine inward, is showing the best performance in terms of controling panel temperature and efficiency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.585-591
• /
• 2020

In accordance with the government's expansion of solar power generation, the installation of solar panels is expected to expand in Korea. On the other hand, policy discussions on the establishment of a domestic post-management system for waste from photovoltaic power are insufficient. This study estimated the benefit-cost of solar PV Panel recycling and derived the implications for the photovoltaic waste policies in Korea. Overall, the profitability of the recycling project is very low when the project execution period is 10 years. On the other hand, the economic efficiency of the project can be sufficiently high when the duration of the solar panel recycling project is extended to 20 years. In the short term, it is challenging to expect voluntary companies to enter this recycling business because of low economic efficiency. Therefore, it is necessary to prepare various policies to improve the economic efficiency of the recycling business. In conclusion, the following policy implications for PV panel recycling activation are proposed: i) legislation for the recycling of waste solar photovoltaic panel, ii) designation of Association for Solar Panel waste monitoring, and iii) expansion of R & D and the development of various business models related to solar recycling.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.352-355
• /
• 2000

Although for its great amount and cleanness solar energy has been studied a lot as a substitute one, it is limitedly being utilized in heating water and partly in special usage for high cost of installing solar cell in Korea. Consider domestic shortage of natural energy resources and environmental issue by the Climate Agreement treated in 1994, it is urgently needed to study the practical application of solar energy as a substitute one. Therefore in order to increase the efficiency of solar cell and decrease its price, this study treats the course of designing and manufacturing the panel that connects sunlight by fixing reflector.

• Journal of Aerospace System Engineering
• /
• v.14 no.3
• /
• pp.51-59
• /
• 2020

In the case of cubesat, a PCB-based deployable solar panel advantageous in terms of weight reduction and electrical circuit design is widely used considering the limited weight and volume of satellites. However, because of the low thermal conductivity of PCB, there is a limit relative to heat dissipation. In this paper, the thermal gap pad is applied to the contact between the PCB-based solar panel and the aluminum stiffener mounted on the outside of the panel. Thus, the heat transfer from the solar cell to the rear side of the panel is facilitated. It maximizes the heat dissipation performance while maintaining the merits of PCB panel, and thus, it is possible to improve the power generation efficiency from reducing the temperature of the solar cell. The effectiveness of the thermal design of the 6U cubesat's deployable solar panel using the thermal gap pad has been verified through on-orbit thermal analysis based on the results, compared with the conventional PCB-based solar panel.

• Journal of information and communication convergence engineering
• /
• v.5 no.4
• /
• pp.358-361
• /
• 2007

We report on a new type dc-dc converter design that combines the advantage of dc ripple noise elimination and high efficiency. As potential low cost solar cells, DSC module and the panel's system efficiency and stability are still critical problems to the way of marketing. In this study, a new three-step dc-dc converter scheme with the phase-shift-carrier technology is proposed to apply for solar power system. We have achieved power conversion efficiency around 94.88%.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.11
• /
• pp.1806-1816
• /
• 2009

This study analyzes the efficiency of a solar cell attached to an air circulation jacket. A commercially available silicon solar panel was selected and attached at four spots where the body angle was $40-60^{\circ}$ and voltage ($V_{oc}$, V), current ($I_{sc}$, A), and output power (P, W) were measured to determine the efficiency. The solar panel was applied to the outer jacket that operates with two fans to increase the convection that lowers the body temperature. The heavy work of standing, walking, and sweeping of a street sweeper was simulated in the field test. The microclimate within the jacket (with or without a fan) was measured and the subjective thermal, humidity, and comfort sensations were surveyed. SPSS 12.0 statistical package was used for a t-test and Wilcoxon signed-rank test. The results show that the highest efficiency of the solar cell was at the incident angle of $60^{\circ}$ in terms of voltage, current and output power distribution. The microclimate temperature of the air circulation jacket decreased significantly with the high power of the fan and subjects felt cooler than the jacket with a fan at the incident angle of $60^{\circ}$. Air circulation jackets operated by a silicon solar panel showed a significant cooling effect on the wearers.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.5
• /
• pp.67-73
• /
• 2013

The conversion of solar radiation into electrical energy by Photo-Voltaic (PV) effect is a very promising technology, being clean, silent and reliable, with very small maintenance costs and small ecological impact. The output power produced by the PV panels depends strongly on the incident light radiation. The continuous modification of the sun-earth relative position determines a continuously changing of incident radiation on a fixed PV panel. The point of maximum received energy is reached when the direction of solar radiation is perpendicular on the panel surface. Thus an increase of the output energy of a given PV panel can be obtained by mounting the panel on a solar tracking device that follows the sun trajectory. Tracking systems that have two axes and follow the sun closely at all times during the day are currently the most popular. This paper presents research conducted into the performance of Solar tracking system with photosensors. The results show that an optimized dual-axis tracking system with photosensor performance and analysis. From the obtained results, it is seen that the sun tracking system improves the energy and energy efficiency of the PV panel.ti-junction CPV module promises to accelerate growth in photovoltaic power generation.

• Journal of the Speleological Society of Korea
• /
• no.89
• /
• pp.27-33
• /
• 2008

Solar energy is most green and clean, unlimited and sustainable energy source on the earth. It is almost 97% of imported consumer energy in Korea. Because of resource poor nation, it is necessary to do their best to make alternative energy to allot their deficiency of the matter in hand of energy resources of petroleum. In a point of view of this problems, the natural solar energy should be improved by any methods as much, possible as we need. Photovoltaic generation with solar tracking system for obtaining optimal power is one of most benefit equipment to improve power of solar-cell panel producing clean electric power efficiently. Solar tracker is a device for orienting a solar photovoltaic panel toward the sun perpendicularly to sunlight, especially in widely separated place. For this reason, we are very interested in developing the equipment system of tracker, specially in solar cell applications, obtaining a high degree of accuracy to ensure that the optimal sunlight could be directed precisely against to the powered device. As a result, it was obtained of 12.46 volts at 90$^\circ$toward solar panel and 9.44 volts at 45$^\circ$, furthermore, improved efficiency more than 30% of average output voltage between tracker system (12.41V) and fixed system (8.55V), respectively. It is also very useful for optimum power system of widely separated cave.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.8
• /
• pp.148-155
• /
• 2002

A study on the installation angle of solar panels is conducted as a conceptual study on solar-RFC(regenerative fuel cell) system for stratospheric airships. The airship heads for the west in winter days and the east in summer days according to wind directions. Considering this, it is found that when the solar panel is installed with the center angle of 30 degree the energy output of solar panels is maximized on winter solstice and satisfies the required energy of summer days as well. Although with the optimized solar panel installation angle, efficiency of the regenerative power system needs be improved to 47% to provide required energy of a 170m-long airship. And the required amount of efficiency improvement decreases as the airship size increases.

• International journal of advanced smart convergence
• /
• v.11 no.3
• /
• pp.187-196
• /
• 2022

In this paper, we propose an example of designing and constructing a roof-type solar power plant structure equipped with a Pseudo-BIPV (Building-Integrated Photovoltaic) shape suitable for use as a roof of a small warehouse with a sandwich-type panel structure. As the characteristics of the roof-type solar power generation facility to be installed in the small warehouse proposed in this study, the shape of the roof is not a general A type, but a right-angled triangle shape with the slope is designed to face south. We chose a structure in which an inverter for one power plant and a control facility are linked by grouping several roofs of buildings. In addition, the height of the roof structure is less than 20 cm from the floor, and it has a shape similar to that of the BIPV, so it is building-friendly because it is almost in close contact with the roof. At the same time, the roof creates a reflective light source due to the white color. By linking this roof with a double-sided solar panel, we designed it to obtain both the advantage of the roof-friendliness and the advantage of efficiency improvement for the electric power generation based on the double-sided panel. Compared to the existing solar power generation facilities using A-shaped cross-sectional modules, the power generation efficiency of roofs in this case is increased by more than 11%, which we can confirm, through the comparison analysis of monitoring data between power plants in the same area. Therefore, if the roof-type solar structure suitable for the small warehouse we have presented in this paper is used, the facilities of electric power generation is eco-friendly. Further it is easier to obtain facility certification compared to the BIPV, and improved capacity of the power generation can be secured at low material cost. It is believed that the roof-type solar power generation facility we proposed can be usefully used for warehouse or factory-based smart housing. Sensor devices for monitoring, CCTV monitoring, or safety and environment management, operating in connection with the solar power generation facilities, are linked with the Internet of Things (IoT) solution, so they can be monitored and controlled remotely.