• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.3
• /
• pp.141-148
• /
• 2021

Agrivoltaic systems, also called solar sharing, stated from an idea that utilizes sunlight above the light saturation point of crops for power generation using solar panels. It is expected that agrivoltaic systems can realize climate smart agriculture by reducing evapotranspiration and methane emission due to the reduction of incident solar radiation and the consequent surface cooling effect and bring additional income to farms through solar power generation. In this study, to evaluate that agrivoltaic systems are suitable for realization of climate smart agriculture, we conducted agro-environmental observations (i.e., downward/upward shortwave/longwave radiations, air temperature, relative humidity, water temperature, soil temperature, and wind speed) in a rice paddy under an agrivoltaic system and compared with the environment outside the system using automated meteorological observing systems (AMOS). During the observation period, the spatially averaged incoming solar radiation under the agrivoltaic system was about 70% of that in the open paddy field, and clear differences in the soil and water temperatures between the paddy field under the agrivoltaic system and the open paddy field were confirmed, although the air temperatures were similar. It is required in the near future to confirm whether such environmental differences lead to a reduction in water consumption and greenhouse gas emissions by flux measurements.

• Korean Journal of Agricultural Science
• /
• v.38 no.3
• /
• pp.505-512
• /
• 2011

Structural characteristics for standard models of single-span plastic greenhouse in Korea and high tunnels in North America were analyzed, and comparative analysis for greenhouse environments measuring in Korean farmhouse and Rutgers high tunnel was carried out to find structural and environmental improvements of single-span plastic greenhouses that occupy most of Korean greenhouse. Widths of high tunnels are similar to single-span plastic greenhouses but their heights are high comparatively and their side heights are fairly higher than single-span plastic greenhouses specially. Rafters, which are main frames, section sizes of high tunnels are bigger and their intervals are wider than single-span plastic greenhouses. Relative bending resistances compared with representative Korean greenhouse were analyzed by 0.92 to 1.42 in single-span plastic greenhouses, and 1.38 to 2.96 in high tunnels. Frame ratios of single-span plastic greenhouses were 6.8 to 8.6%, and those of high tunnels were 5.5 to 8.7%. We analyzed air temperatures and solar radiations measured in single-span plastic greenhouse and high tunnel on clear days in late March. There were outside temperatures in generally similar range, and judging by rise of indoor temperatures, ventilation performance of high tunnel is more excellent than single-span plastic greenhouse. Solar radiations of two areas were no big difference but light transmittance of high tunnel was a little bit higher than single-span plastic greenhouse. Single-span plastic greenhouses are disadvantageous in environmental managements such as ventilation performance and light transmittance because distance between greenhouses is too narrow and length of greenhouse is too long compared to high tunnels. To get the environmental improvement effects as well as to increase the structural resistance of single-span plastic greenhouses are achievable by widening the width of greenhouse in possible range, widening the space between rafters, and enlarging the section size of rafters. Also, we need to secure enough distance between greenhouses and to restrict the length of greenhouse by maximum 50 m in order to improve the ventilation performance and the light transmittance.

• Journal of IKEEE
• /
• v.22 no.1
• /
• pp.213-215
• /
• 2018

In this study, we fabricate amorphous carbon thin films on silicon substrates by DC sputtering method and investigate the optical property and photothermal characteristics. A representative amorphous carbon thin film has a absorption value of 97% at a wavelength of 1000 nm and shows a temperature increase of $3^{\circ}C$ from $21.1^{\circ}C$ to $24.1^{\circ}C$ during white light irradiation. In addition, the amorphous carbon film has a heating rate four times higher than that of the substrate during light irradiation for 50 sec.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.340-340
• /
• 2016

We have prepared alumina (Al2O3) doped zinc oxide (AZO) films by DC magnetron sputtering (MS) technique and obtained higher self surface texturing at a high target angle (f). We have characterized the films and applied it as a front electrode of a single junction amorphous silicon solar cell. At a lower f the deposited films show higher values of optical gap (Eg), charge carriers mobility & concentration, crystallite grain size and wider wavelength range of transmission. At higher target angle the sheet resistance, surface roughness, haze factor etc for the films increase. For f=72.5o the haze factor for diffused transmission becomes 6.46% at 540 nm wavelength. At f=72.5o the material shows a reduction in crystallinity and evolution of a hemispherical-type sub-micron surface textures. A Monte Carlo method (MCM) of simulation of the AZO film deposition shows that such an enhanced self-surface texturing of the films at higher f is possible.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.170.2-170.2
• /
• 2015

Enormous interest in trivalent rare-earth (RE) ions activated luminescent materials has been gaining owing to their promising applications in bio-imaging, solar cells, white light-emitting diodes and field-emission displays. Among these trivalent RE ions, dysprosium (Dy3+) was widely investigated due to its unique photoluminescence (PL) emissions. A series of Dy3+-activated CaWO4 phosphors were prepared by a facile high-temperature solid-state reaction method. The X-ray diffraction, PL spectra, cathodoluminescence (CL) spectra as well as PL decay curves were used to characterize the prepared samples. Under ultraviolet light excitation, the characteristic emissions of Dy3+ ions were observed in all the obtained phosphors. Furthermore, the PL emission intensity increased gradually with the increment of Dy3+ ion concentration, reaching its maximum value at an optimized Dy3+ ion concentration. Additionally, color-tunable emissions were obtained in Dy3+-activated CaWO4 system by adjusting the Dy3+ ion concentration and excitation wavelength. Ultimately, strong CL properties were observed in Dy3+-activted CaWO4 phosphors. These results suggested that the Dy3+-activted CaWO4 phosphors may have potential applications in the field of miniature color displays.

• Journal of Bio-Environment Control
• /
• v.8 no.3
• /
• pp.164-171
• /
• 1999

Tomato yield and harvest date were analyzed to examine the productivity of Single Truss Tomato Production System(STTPS) for four regions in Korea. It was found that the solar radiation was not sufficient to get the maximum tomato yield during the low light seasons. The difference of total annual yield between Suwon and Jinju regions was about 12kg.m$^{-2}$ . These results indicate that supplemental lights are needed to increase the yield. The availability of natural light should be considered in deciding the locations of tomato greenhouses. The harvest date could be adjusted by using supplemental lighting. The development and implementation of the lighting control strategies are required for reducing electricity expense.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.662-662
• /
• 2013

Over the last several decades, innovative light-harvesting devices have evolved to achieve high efficiency in solar energy transfer. Research on the mechanisms for plasmon resonance is very desirable to overcome the conventional efficiency limits of photovoltaics. The influence of localized surface plasmon resonance on hot electron flow at a metal-semiconductor interface was observed with a Schottky diode composed of a thin silver layer on $TiO_2$. The photocurrent is generated by absorption of photons when electrons have enough energy to travel over the Schottky barrier and into the titanium oxide conduction band. The correlation between the hot electrons and the surface plasmon is confirmed by matching the range of peaks between the incident photons to current conversion efficiency (IPCE, flux of collected electrons per flux of incident photons) and UV-Vis spectra. The photocurrent measured on Ag/$TiO_2$ exhibited surface plasmon peaks; whereas, in contrast to the Au/$TiO_2$, a continuous Au thin film doesn't exhibit surface plasmon peaks. We modified the thickness and morphology of a continuous Ag layer by electron beam evaporation deposition and heating under gas conditions and found that the morphological change and thickness of the Ag film are key factors in controlling the peak position of light absorption.

• Current Photovoltaic Research
• /
• v.4 no.2
• /
• pp.64-67
• /
• 2016

We investigated the influences of Ag nanoparticle (NP) arrays and surface nanohole (NH) patterns on the optical characteristics of 10-${\mu}m$-thick c-Si wafers using finite-difference time-domain (FDTD) simulations. In particular, we comparatively studied the plasmonic effects of both monomer arrays (MA) and heptamer arrays (HA) consisting of identical Ag NPs. HA improved the optical absorption of the c-Si wafers in much wider wavelength range than MA, with the help of hybridized plasmon modes. The light trapping capability of the NH array pattern is superior to that of the Ag plasmonic NPs. We also found that the addition of the Ag HA on the wafers with surface NH patterns further enhanced optical absorption: the expected short-circuit current density was as high as $34.96mA/cm^2$.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2207-2210
• /
• 2005

Guest guidance system based on the compact battery-less information terminal, Aimulet, which has been developed by the authors of the National Institute of Advanced Industrial Science and Technology (AIST), Japan. Conventional Aimulet, which is Aimulet ver.1 or CoBIT, has features of location and direction sensitive information service device without batteries. On the other hand, the Aimulet has two subjects, one is multiplex and demultiplex of some contents, and the other is operation under sunshine. Former subject is of solved by the wavelength multiplex technique using LED emitter with different wavelength and dielectric optical filters. Latter subject is solved by new micro spherical solar cells with a visible-light-eliminating optical filter and a new design of light irradiation. These techniques are applied to the EXPO 2005, Aichi Japan and introduced in public. Aimulet GH is Former technique is applied on Aimulet GH, which is used in Orange Hall of the Global House, scientific museum with a fossil of a frozen mammoth.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.4
• /
• pp.585-590
• /
• 2017

In this paper, a low power of safety oriented sidewalk block was implemented using dimming technology using LED and illuminance sensor to prevent glare by high - intensity light source and prevent night traffic accident. The dimming system of this paper used a light bulb color with less fatigue to prevent glare and consumed 6.10Wh power. Also, it is confirmed that the power saving is about 56.9% when compared with the existing system.