• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.1
• /
• pp.1-28
• /
• 2019

This study analyzed the density and mortality rate of Korean fir at 9 sites where individuals of Korean firs were marked into the live and dead trees with coordinates on orthorectified aerial images by digital photogrammetric system. As a result of the analysis, Korean fir in each site showed considerable heterogeneity in density and mortality rate depending on the location within site. This make it possible to assume that death of Korean fir can occur by specific factors that vary depending on the location. Based on the analyzed densities and mortality rates of Korea fir, we investigated the correlation between topographic factors such as altitude, terrain slope, drainage network, solar radiation, aspect and the death of Korean fir. The density of Korean fir increases with altitude, and the mortality rate also increases. A negative correlation is found between the terrain slope and the mortality rate, and the mortality rate is higher in the gentle slope where the drainage network is less developed. In addition, it is recognized that depending on the aspect, the mortality rate varies greatly, and the mean solar radiation is higher in live Korean fir-dominant area than in dead Korean fir-dominant area. Overall, the mortality rate of Korean fir in Mt. Halla area is relatively higher in areas with relatively low terrain slope and low solar radiation. Considering the results of previous studies that the terrain slope has a strong negative correlation with soil moisture and the relationship between solar radiation and evaporation, these results lead us to infer that excess soil moisture is the cause of Korean fir mortality. These inferences are supported by a series of climate change phenomena such as precipitation increase, evaporation decrease, and reduced sunshine duration in the Korean peninsula including Jeju Island, increase in mortality rate along with increased precipitation according to the elevation of Mt. Halla and the vegetation change in the mountain. It is expected that the spatial patterns in the density and mortality rate of Korean fir, which are controlled by topography such as altitude, slope, aspect, solar radiation, drainage network, can be used as spatial variables in future numerical modeling studies on the death or decline of Korean fir. In addition, the method of forest distribution survey using the orthorectified aerial images can be widely used as a numerical monitoring technique in long - term vegetation change research.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.9 no.3
• /
• pp.195-202
• /
• 2007

The normalized difference in incident solar energy between a target surface and a level surface (overheating index, OHI) is useful in eliminating estimation error of site-specific maximum temperature in complex terrain. Due to the complexity in its calculation, however, an empirical proxy variable called northern exposure index (NEI) which combines slope and aspect has been used to estimate OHI based on empirical relationships between the two. An experiment with real-world landscape and temperature data was carried out to evaluate performance of the NEI - derived OHI (N-OHI) in reduction of spatial interpolation error for daily maximum temperature compared with that by the original OHI. We collected daily maximum temperature data from 7 sites in a mountainous watershed with a $149 km^2$ area and a 795m elevation range ($651{\sim}1,445m$) in Pyongchang, Kangwon province. Northern exposure index was calculated for the entire 166,050 grid cells constituting the watershed based on a 30-m digital elevation model. Daily OHI was calculated for the same watershed ana regressed to the variation of NEI. The regression equations were used to estimate N-OHI for 15th of each month. Deviations in daily maximum temperature at 7 sites from those measured at the nearby synoptic station were calculated from June 2006 to February 2007 and regressed to the N-OHI. The same procedure was repeated with the original OHI values. The ratio sum of square errors contributable by the N-OHI were 0.46 (winter), 0.24 (fall), and 0.01 (summer), while those by the original OHI were 0.52, 0.37 and 0.15, respectively.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.6_1
• /
• pp.519-528
• /
• 2012

It was pointed out that the terrain distortion of SAR image is even worse than that of optical image although SAR imagery has the advantages of being independent of solar illumination and weather conditions. It is thus necessary to correct terrain distortion in SAR image for various application areas to integrate SAR and optical image information. There has to be a clear evaluation of terrain correction of high resolution SAR image according to the quality of DEM because the DEM of study site is generally used in the process of terrain correction. To achieve this issue, this paper compared the effects of quality of Digital Elevation Model(DEM) in the process of terrain correction of high resolution SAR images, using the DEM produced from 1:5000 topographic contour maps, LiDAR DEM, ASTER GDEM, SRTM DEM. We used TerraSAR-X and Cosmo-SkyMed, as the test data set, which are constructed on the same X-band SAR system as KOMPSAT-5. In order to evaluate quantitatively the correction results, we conducted comparative evaluation with the KOMPSAT-2 ortho image of the same region. The evaluation results showed that the DEM produced from 1:5000 topographic contour maps achieved successful results in the terrain correction of SAR image compared with the other DEM data, and the widely used SRTM DEM data in various applications was not suitable for the terrain correction of high resolution SAR images.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.4
• /
• pp.311-325
• /
• 2023

This study was conducted to analyze the habitat suitability of the major honey trees including Kalopanax septemlobus Koidz., Prunus spp., Tilia spp., and Styrax obassia Siebold & Zucc. indigenous to mountain Gariwang and Yumeong using the machine learning approach (i.e., MaxEnt model). The AUC values of the model predictions were mostly above 0.7, and the results of the response curves showed that the environmental drivers that had effects on the habitat suitability of the major honey trees were elevation, mean annual precipitation, and mean annual temperature. These results indicate that climatic drivers along the elevation gradient are the main environmental drivers in explaining the distribution patterns of the major honey trees. In addition, the results of the response curves of Prunus spp. and Styrax obassia Siebold & Zucc. differed slightly in terms of slope and mean annual solar radiation as the main environmental drivers. The results of this study will be valuable for the establishment of honey tree forests and management plans for the natural and artificial forests in South Korea, as well as for the mapping the distribution of honey trees. Further studies at different regional levels, reflecting biotic drivers, will be needed to expand the production of honey and pollen at different strata and to produce honey annually.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.3
• /
• pp.151-165
• /
• 2008

Ground slope and aspect are important parameters for physical deterministic water balance models like BROOK90 or hydrological models which attempt to calculate evapotranspiration, snowmelt, and net radiation. This study constructs a Digital Elevation Model(DEM) and examines how DEM resolution can change the average ground slope and aspect of a river basin and attempts to evaluate the effects on simulation results of BROOK90, a physical deterministic water balance model. The study area is Byungcheon river basin in Korea. DEM has been constructed using a 1:25,000 digital map with the methods of TIN and Topo To Raster. The total of 20 DEMs with 10m~100m resolution have been constructed, with a 10m interval. It was found that the higher the DEM resolution, the steeper the average ground slope value of the Byungcheon river basin. In turn, the direct solar radiation of a hilly area in the model increased the evapotranspiration and reduced the stream runoff in the Byungcheon river basin. On the other hand, a lower DEM resolution tends to move the average aspect from southeast to south in the Byungcheon river basin. Accordingly, it was found that stream runoff was reduced and evapotranspiration increased.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.1
• /
• pp.75-88
• /
• 2009

The main purpose of the current research is to introduce the alternative algorithm of the non-recursive batch filter based on the unscented transformation in which the linearization process is unnecessary. The presented algorithm is applied to the orbit determination of a low earth orbiting satellite and compared its results with those of the well-known Bayesian batch least squares estimation and the iterative UKF smoother (IUKS). The system dynamic equations consist of the Earth's geo-potential, the atmospheric drag, solar radiation pressure and the lunar/solar gravitational perturbations. The range, azimuth and elevation angles of the satellite measured from ground stations are used for orbit determination. The characteristics of the non recursive unscented batch filter are analyzed for various aspects, including accuracy of the determined orbit, sensitivity to the initial uncertainty, measurement noise and stability performance in a realistic dynamic system and measurement model. As a result, under large non-linear conditions, the presented non-recursive batch filter yields more accurate results than the other batch filters about 5% for initial uncertainty test and 12% for measurement noise test. Moreover, the presented filter exhibits better convergence reliability than the Bayesian least squares. Hence, it is concluded that the non-recursive batch filter based on the unscented transformation is effectively applicable for highly nonlinear batch estimation problems.

• Korean Institute of Interior Design Journal
• /
• v.22 no.6
• /
• pp.3-10
• /
• 2013

This study intends to clarify the key elements of designing low energy residential building construction by planning out residential construction in nature oriented designing method utilizing nearby environment and nature oriented energy from designing stage instead of construction of low energy residential building. Development of building technology is proportional to the development of technology that lasts already. However, what is no less important than the advancement of technology, it is the study of fundamental phenomena energy use in response to climate, reduction, such as recycling. It is possible in such a purpose, it is assumed that there is a need to study elements implementation plan in accordance with the climatic characteristics of the study. Method for controlling the condition solar radiation, sunshine, depending on the characteristics of the weather, by utilizing the convection phenomenon of nature, to maintain the air comfort in the interior space is the essence of eco-friendly construction and passive Property This is an important architectural elements to be aim. For through the analysis of this case, corresponding to the phenomenon of the features of the macro climate and micro climate due to climate change, a combination building blocks of classification placement of each, shape, structure, elevation, space, of the material appeared in various it was possible to know the construction characteristics were. As shown in each case, construction method to address climate change has been found to apply to a comprehensive analysis climatic characteristics of each region, in response to this, the construction of element each corresponding.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1240-1243
• /
• 2008

제주도는 연평균 강우량이 1,975mm에 달하는 우리나라 최대의 다우지역이며 투수성이 좋은 다공질 화산암류 및 화산회토로 이루어져 있어 총 강우량의 48.5%에 이르는 빗물이 지하로 침투하여 대부분의 하천들은 건천을 이루고 있다. 제주도의 143개 하천 중 6개의 하천을 제외한 전 하천들은 건천의 형태를 이루고 있어 지표수의 발달이 매우 빈약하다. 본 연구에서는 장기 강우-유출 모형인 SWAT(Soil and Water Assessment Tool) 모형을 적용하여 제주도 주요하천의 유출량을 산정하고자 한다. 143개 하천 중 제주도 동부유역의 천미천과 북부유역의 외도천을 연구대상유역으로 선정하여 SWAT 모형을 적용하였다. 연구 대상유역에 대한 SWAT 모형의 입력자료인 수문 기상자료(Precipitation, Solar Radiation, Wind Speed, Climate, Humidity)와 지형자료(DEM(Digital Elevation Model), Land Use, Soil Type)를 구축하였으며, 동시에 모형의 보정 및 검증을 위하여 천미천 외도천 유역의 실측 유출자료를 수집하여 정리하였다. 모델의 입력자료를 구축하고 SWAT 모형을 이용하여 천미천 외도천 유역의 유출 모의를 하였고, 유출 모의 결과를 바탕으로 하여 수문관련 매개변수들의 민감도 분석을 하였으며, 민감도 분석을 통하여 보정을 수행하였다. 보정을 수행한 결과를 바탕으로 하여 천미천 외도천의 유출모의 결과를 분석하였으며, 향후 제주도에 필요한 연구결과 활용방안에 대하여 검토한 이상의 결과들로부터 제주도 하천에 대하여 SWAT모형을 적용한 결과 장기 일 유출량 모의에 대하여 전체적으로 우수한 결과를 보이고 있다. 향후 많은 보다 많은 유출량 자료를 확보하여 본 연구의 결과와 비교 검정하여 SWAT 모형을 구축한다면 제주도 하천의 장기 일 유출량 모의를 할 수 있을 것이라 판단된다.

• Atmosphere
• /
• v.23 no.3
• /
• pp.275-282
• /
• 2013

In this study, the numerical model was developed to evaluate the observational environment of sunshine duration and, for evaluating the accuracy and utility of the model, it was verified against the observational data measured at Dae-gu Automated Synoptic Observing System (ASOS) located in an urban area. Three-dimensional topography and building configuration as the surface input data of the model were constructed using a Geographic Information System (GIS) data. First, the accuracy of the computing planetary positions suggested by Paul Schlyter was verified against the data provided by Korea Astronomy and Space Science Institute (KASI) and the results showed that the numerical model predicted the Sun's position (the solar azimuth and altitude angles) quite precisely. Then, this model was applied to reproduce the sunshine duration at the Dae-gu ASOS. The observed and calculated sunshine durations were similar to each other. However, the observed and calculated sunrise (sunset) times were delayed (curtailed), compared to those provided by KASI that considered just the ASOS's position information such as latitude, longitude, and elevation height but did not consider the building and topography information. Further investigation showed that this was caused by not only the topographic characteristic (higher in the east and lower in the west) but also the buildings located in the southeast near the sunrise and the southwest near the sunset. It was found that higher building resolution increased the accuracy of the model. It was concluded that, for the accurate evaluation of the sunshine duration, detailed building and topography information around the observing sites was required and the numerical model developed in this study was successful to predict and/or the sunshine duration of the ASOS located in an urban area.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.116.1-116.1
• /
• 2012

When an interplanetary (IP) shock passes over the Earth's magnetosphere, the geosynchronous magnetic field strength near the noon is always enhanced, while the geosynchronous magnetic field near the midnight decreases or increases. In order to understand what determines the positive or negative magnetic field response at nightside geosynchronous orbit to sudden increases in the solar wind dynamic pressure, we have examined 120 IP shock-associated sudden commencements (SC) using magnetic field data from the GOES spacecraft near the midnight (MLT = 2200~0200) and found the following magnetic field perturbation characteristics. (1) There is a strong seasonal dependence of geosynchronous magnetic field perturbations during the passage of IP shocks. That is, the SC-associated geosynchronous magnetic field near the midnight increases (a positive response) in summer and decreases (a negative response) in winter. (2) These field perturbations are dominated by the radial magnetic field component rather than the north-south magnetic field component at nightside geosynchronous orbit. (3) The magnetic elevation angles corresponding to positive and negative responses decrease and increase, respectively. These field perturbation properties can be explained by the location of the cross-tail current enhancement during SC interval with respect to geosynchronous spacecraft position.