• 한국재료학회지
• /
• 제31권1호
• /
• pp.8-15
• /
• 2021

Transparent, photocatalytic, and self-cleaning TiO2 thin film is developed by TiO2 sol-gel coating on glass and polycarbonate (PC) substrates. Acetyl acetone (AcAc) suppresses the precipitation of TiO2 by forming a yellowish (complex) transparent sol-gel. XPS analysis confirms the presence of Ti2p and O1s in the thin films on glass and PC substrates. The TiO2-sol is prepared by stabilizing titanium (IV) isopropoxide (TTIP) with diethylamine and methyl alcohol. The addition of AcAcsilane coupling solution to the TiO2-sol instantaneously turns to yellowish color owing to the complexing of titanium with AcAc. The AcAc solution substantially improves the photocatalytic property of the TiO2 coating layer in MB solutions. The coated TiO2 film exhibits super hydrophilicity without and with light irradiation. The TiO2 thin film stabilized by adding 8.7 wt% AcAc shows the highest photo-degradation for methylene blue (MB) solution under UV light irradiation. Also, the optimum photocatalytic activity is obtained for the 8.7 wt% AcAc-stabilized TiO2 coating layer calcined at 450 ℃. The thin-films on glass exhibit fast self-cleaning from oleic acid contamination within 45 min of UV-light irradiation. The appropriate curing time at 140 ℃ improves the anti-fogging and thermal stability of the TiO2 film coated on PC substrate. The watermark-free PC substrate is particularly beneficial to combat fogging problems of transparent substrates.

• Bulletin of the Korean Chemical Society
• /
• 제16권12호
• /
• pp.1148-1152
• /
• 1995

Oxidative dimerization of methane to C2-hydrocarbons was performed over lead aluminate spinel catalysts. These spinel catalysts were prepared by co-precipitation, aerogel, and sol-gel methods. The active phase of lead aluminate oxides was found to be PbAl2O4 spinel. The activities of the catalysts were strongly dependent on the preparation method as well as the composition of PbAl2O4 phase. The proper oxygen mobility of PbAl2O4 spinel oxides appeared to be important to get high catalytic activity and selectivity for C2-hydrocarbon formation.

• 한국치위생학회지
• /
• 제1권1호
• /
• pp.125-132
• /
• 2001

This study was carried out to investigate the effect of multi or single application of fluoride plus 0.05% NaF solution on the remineralization of dental caries lesion. The microhardness changes of enamel surface were measured after application of fluoride and precipitation of 0.05% NaF solution on 6 groups of cow's tooth on which the artificial carious lesions were formed first. Test groups were calssified into two step application with NaF, $SnF_2$ and APF under different application time conditions plus 0.05% NaF solution(group I, II, III, IV) and single application with APF plus 0.05% NaF solution (group V) and control(0.05% NaF solution only, group IV). The obtained results were as follows. 1. Regarding microhardness change of enamel surface. microhardness increments in group I(NaF for 1 minute+APF for 3 minutes+0.05% NaF solution for 1 minute), II($SnF_2$ 1 min+APF 3 min+NaF sol.), III($SnF_2$ 2 min+APF 2 min+NaF sol.), IV(NaF 2 min+APF 2 min+NaF sol.) and V(APF 4 min+NaF sol.) were significantly greater than group VI.(P<0.05) 2. Microhardness changes of shorter application time of $SnF_2$ (group II) were significantly greater than group III. (P<0.05) 3. Microhardness changes were variable with kinds of fluoride, application sequence and application time of fluoride. but had no relation with the number of fluoride application.

• 한국세라믹학회지
• /
• 제46권6호
• /
• pp.574-582
• /
• 2009

$UO_2$ microsphere particles, core material of HTGR(High Temperature Gas Reactor) nuclear fuel, were prepared using by the GSP(Gel Supported Precipitation) method which is a modified-method of the wet sol-gel process. The spherical shape of initial liquid ADU droplets from the vibration nozzle system was continuously kept till the conversion to the final $UO_2$ microsphere. But the size of a final $UO_2$ microsphere was shrunken to about 25% of an initial ADU droplet size. Also, we found that the composition of dried-ADU gel particles was constituted of the very complicated phases, coexisted the U=O, C-H, N-H, N-O, and O-H functional groups by FT-IR. The important factors for obtain the no-crack $UO_2$ microsphere during the thermal treatment processes must perfectly wash out the remained-$NH_4NO_3$ within the ADU gel particle in washing process and the selections of an appropriate heating rate at a suitable gas atmosphere, during the calcining of ADU gel particles, the reducing of $UO_3$ particles, and the sintering of $UO_2$ particles, respectively.

• 한국응용과학기술학회지
• /
• 제18권3호
• /
• pp.167-173
• /
• 2001

The spinel $LiMn_{2}O_{4}$ powders were synthesized at $480^{\circ}C$ for 12 h in air by a sol-gel method using manganese acetate and lithium hydroxide as starting material and the $Fe_{3}O_{4}$ powders were synthesized by the precipitation method using $0.2M-FeSO_{4}{\cdot}H_{2}O$ and 0.5M-NaOH. The synthesized $Fe_{3}O_{4}$ powders were mixed at portion of 5, 10, 15 and 20 wt% about $LiMn_{2}O_{4}$ powders through ball-milling followed by drying at room temperature for 48 h in air. The mixed catalysts were reduced at $350^{\circ}C$ for 3 h by hydrogen and the decomposition rate of carbon dioxide was measured at $350^{\circ}C$ using the reduced catalysts. As the results of $CO_{2}$ decomposition experiments, the decomposition rates of carbon dioxide were 85% in all catalysts but the initial decomposition rates of $CO_{2}$ were slightly high in the case of the $5%-Fe_{3}O_{4}$ added catalyst.

• 한국분말재료학회지
• /
• 제30권2호
• /
• pp.107-115
• /
• 2023

Li_1.3Al_0.3Ti_1.7(PO₄)₃(LATP) is considered a promising material for all-solid-state lithium batteries owing to its high moisture stability, wide potential window (~6 V), and relatively high ion conductivity (10^-3-10^-4 S/cm). Solid electrolytes based on LATP are manufactured via sintering, using LATP powder as the starting material. The properties of the starting materials depend on the synthesis conditions, which affect the microstructure and ionic conductivity of the solid electrolytes. In this study, we synthesize the LATP powder using sol-gel and co-precipitation methods and characterize the physical properties of powder, such as size, shape, and crystallinity. In addition, we have prepared a disc-shaped LATP solid electrolyte using LATP powder as the starting material. In addition, X-ray diffraction, scanning electron microscopy, and electrochemical impedance spectroscopic measurements are conducted to analyze the grain size, microstructures, and ion conduction properties. These results indicate that the synthesis conditions of the powder are a crucial factor in creating microstructures and affecting the conduction properties of lithium ions in solid electrolytes.

• Bulletin of the Korean Chemical Society
• /
• 제32권6호
• /
• pp.1865-1872
• /
• 2011

This study investigates the sensitivity of a gas sensor to volatile organic compounds (VOCs) at various operating temperatures and catalysts. Nano-sized powdered $WO_3$ prepared by sol-gel and chemical precipitation methods was mixed with various metal oxides. Next, transition metals (Pt, Ru, Pd, and In) were doped on the surface of the mixture. Metal-$WO_3$ thick films were prepared using the screen-printing method. The physical and chemical properties of the films were studied by SEM/EDS, XRD, and BET techniques. The measured sensitivity to VOCs is defined as the ratio ($R_a/R_g$) of resistance ($R_{air}$) of $WO_3$ film in the air to resistance ($R_{gas}$) of $WO_3$ film in a VOCs test gas. The sensitivity and selectivity of the films were tested with various VOCs such as acetaldehyde, formaldehyde, methyl alcohol, and BTEX. The thick $WO_3$ film containing 1 wt % of Ru and 5 wt % of $SnO_2$ showed the best sensitivity and selectivity to acetaldehyde gas at an operating temperature of 300 $^{\circ}C$.

• 대한화학회지
• /
• 제41권3호
• /
• pp.130-137
• /
• 1997

육방형 이황화 티탄늄의 분말과 박막을 졸-겔법을 변형시켜 제조하였다. 여러 가지 용매하에서 이소프로폭시화 티탄늄과 황하 수소와의 반응에 의해 전구체의 침전을 유도한 후 이것을 황화 수소 분위기에서 열처리를 하면 분말이 얻어지는 반면 2-메톡시에톡시화 티탄늄과의 반응은 안정한 전구체 용액을 주므로 이것을 스핀 코팅하여 열처리하면 박막을 얻을 수 있다. 이러한 분말과 박막의 형태 변화를 열처리를 하면서 전자 현미경과 분말 X-선 회절기를 통해 살펴보았다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제27권1호
• /
• pp.203-208
• /
• 2013

Sericin is usually abandoned after the degumming process. However, it could be a valuable bioresource if an economically efficient recovery process could be set up. In this study, sericin was recovered directly from the degummed waste solution by adding calcium chloride, which induced the precipitation of the surfactant, sodium oleate, by charge interaction. The recovery yield was maximum when 10% of calcium chloride was added. Further increase in the calcium chloride concentration induced the precipitation of sericin. The recovered sericin had a molecular weight distribution similar to that of the hot-water-extracted sericin; but some highmolecular- weight sericin could not be recovered. The secondary structure and amino acid composition of the recovered sericin were similar to those of conventional hot-water-extracted sericin. We expect that sericin recovered from the degummed waste solution could be an alternative to the hot-water-extracted sericin, which is widely used in various applications.

• Applied Biological Chemistry
• /
• 제38권4호
• /
• pp.330-333
• /
• 1995

알코올처리 찰가자미류껍질 젤라틴을 식용단백소재로 이용하기 위한 기초자료를 얻을 목적으로 첨가제에 의한 알코올처리 젤라틴의 물리적 특성치의 변화를 검토하였다. 겔강도, 졸화온도, 겔화온도 및 점도와 같은 물리적 특성치는 에탄올처리의 유무에 관계없이 두 젤라틴 모두가 철이온, 당 및 에탄올을 첨가한 경우는 증가하였으나, 염화나트륨 및 유기산을 첨가한 경우는 감소하는 경향을 나타내었고, 첨가물에 의한 물리적 특성치의 증감폭은 에탄올 처리 유무에 따라 차이가 없었다.