• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.407.1-407.1
• /
• 2016

Electrochromism is defined as a phenomenon which involves persistently repeated change of optical properties between bleached state and colored state by simultaneous injection of electrons and ions, sufficient to induce an electrochemical redox process. Due to this feature, considerable progress has been made in the synthesis of electrochromic (EC) materials, improvements of EC properties in EC devices such as light shutter, smart window and variable reflectance mirrors etc. Among the variable EC materials, solid-state inorganics in particular, metal oxide semiconducting materials such as nickel oxide (NiO) have been investigated extensively. The NiO that is an anodic EC material is of special interest because of high color contrast ratio, large dynamic range and low material cost. The high performance EC devices should present the use of standard industrial production techniques to produce films with high coloration efficiency, rapid switching speed and robust reversibility. Generally, the color contrast and the optical switching speed increase drastically if high surface area is used. The structure of porous thin film provides a specific surface area and can facilitate a very short response time of the reaction between the surface and ions. The large variety of methods has been used to prepare the porous NiO thin films such as sol-gel process, chemical bath deposition and sputtering. Few studies have been reported on NiO thin films made by using sol-gel method. However, compared with dry process, wet processes that have the questions of the durability and the vestige of bleached state color limit the thin films practical use, especially when prepared by sol-gel method. In this study, we synthesis the porous NiO thin films on the fluorine doped tin oxide (FTO) glass by using sputtering and anodizing method. Also we compared electrical and optical properties of NiO thin films prepared by sol gel. The porous structure is promised to be helpful to the properties enhancement of the EC devices.

• 접착 및 계면
• /
• 제6권3호
• /
• pp.10-18
• /
• 2005

자동차의 유리를 폴리카보네이트로 대체하기 위하여 폴리카보네이트 판 위에 하드 코팅을 시도하였다. 본 연구에서는 tetraethyl orthosilicate (TEOS), methyltriethoxysilane (MTES)으로부터 졸-겔 과정을 이용하여 코팅 막을 형성하였는데 이 때 가장 우수한 물성을 갖는 배합 조건을 찾아보았다. 폴리카보네이트 판의 전처리, TEOS와 MTES의 비율, 용매의 선택, aging 시간, 산 촉매의 양, 코팅의 횟수 등을 변화시켜가면서 형성된 코팅 막의 물성을 측정하였다. 측정 결과 폴리메칠메타크릴레이트를 이용한 전처리가 접착력 향상에 매우 효과적이었으며 이러한 졸-겔 과장으로부터 연필경도 2 H 정도의 아주 매끄러운 코팅 막이 형성되었다.

• Current Photovoltaic Research
• /
• 제3권1호
• /
• pp.5-9
• /
• 2015

Absorption and luminescence characteristics of disperse red-19 (DR-19) and $TiO_2$ composite have been investigated with various poling electric field strengths. Two step synthetic processes were employed to employ the DR-19 to the $TiO_2$ sol-gel. Firstly, urethane bond formation between DR-19 (-OH) and 3-isocyanatopropyl triethoxysilane (ICPTES, -N=C=O) performed (ICPDR) prior incorporation to the $TiO_2$ sol-gel. Secondary, the hydrolysis of the ethoxy group from the ICPTES and condensation reaction between silanol groups from ICPTES and $TiO_2$ sol-gel were performed. The ICPDR and $TiO_2$ sol-gel ($DRTiO_2$) were mixed and stirred for several days. The composite was coated to the ITO coated glass substrate. Corona poling were performed before drying the composite with various electric field strengths. The absorption intensity decreased with the increase of the poling field strength, which resulted in the increase of poling efficiency. The photoluminescence also decreased as the poling field strength increased. There is long luminescence tail for the poled $DRTiO_2$ film compared with unpoled $DRTiO_2$ film. The luminescence long tail indicates that the self-trapped excitons and polarons were generated when the $DRTiO_2$ film was poled with electric field.

• 한국응용과학기술학회지
• /
• 제40권5호
• /
• pp.1116-1125
• /
• 2023

산화아연 막은 투명한 전도성 물질로써 다양한 분야의 광전자소자에 이용되고 있다. 그러므로 산화아연 막의 특성을 규명하는 것은 광전자소자의 성능을 높이는데 매우 중요한 역할을 할 것이다. 본 논문에서는 이러한 산화아연 막을 용액공정 기반으로 제작하여 형태적, 구조적 특성을 평가하고자 한다. 구체적으로는 졸-겔 방법을 반복적으로 시행하여, 시행 횟수에 따른 산화아연 막의 물성의 변화를 관찰할 것이다. 일정한 용액 조건하에서, 5회의 반복적인 졸-겔 방법을 시행한 결과 결정화가 진행되는 것을 확인하였다. 7회 이상에서는 원소 구성 및 결정화도가 특정 값에 수렴하는 경향을 보였다. 최종적인 산화아연 막의 평균결정의 크기는 약 10.7 nm 정도로 계산되었다. 본 연구를 통해 최적의 결정화를 보이는 공정횟수는 7회였다. 본 연구 결과 및 방법론은 다양한 용액공정 변수를 가변시키면서 적용할 수가 있고 최적의 공정조건을 확립하는데 기여할 것으로 기대한다.

• Journal of Photoscience
• /
• 제11권1호
• /
• pp.1-6
• /
• 2004

Molecular assembling is one of the current interests in the field of bottom-up nanotechnology. Self-assembled monolayers of sulfur-containing molecules or supramolecular assemblies via surface sol-gel processes formed on conductive supports are chemically robust and can be easily fabricated without sophisticated instruments. We have fabricated various types of molecular assemblies consisting of donor-acceptor pairs on the surfaces of gold and indium-tin-oxide electrodes. Build-up of three-dimensional multi structures consisting of thiol dyes and gold nanoparticles also has been successful. These assemblies showed clear photocurrent responses in photoelectro-chemical cells. In this article, we will describe recent progress on photoelectric conversion using molecular assemblies especially focused on our research results.

• Transactions on Electrical and Electronic Materials
• /
• 제11권5호
• /
• pp.212-215
• /
• 2010

$BiFeO_3/Pb(Zr_{0.95}Ti_{0.05})O_3$ (BFO/PZT) heterolayered thin films were fabricated by the spin coating method on a Pt/Ti/$SiO_2$/Si substrate using metal alkoxide solutions. The coating and heating procedure was repeated 6 times to form the heterolayered films. The thickness of the BFO/PZT films after one cycle of drying/sintering is about 30-40 nm. All BFO/PZT films show a void free uniform grain structure without the presence of rosette structures. It can be assumed that the crystal growth of the upper BFO layers can be influenced by the lower PZT layers. As the number of coatings increased, the dielectric constant increased, so that the value for the 6-layer film was 1360 at 1 KHz.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.509-512
• /
• 1999

Ferroelectric Sr$_2$(Nb, Ta)$_2$O$_{7}$(SNTO), La$_2$Ti$_2$O$_{7}$(LTO) thin films were prepared by sol-gel processes. SNTO, LTO thin films were spin-coated on Pt/TiO$_2$/SiO$_2$/Si(100). Pt/Ti/SiO$_2$/Si(100). PT/ZrO$_2$/SiO$_2$/Si(100) substrates. After multiple coating, dried thin films were heat-treated for decomposition of residual organics and crystallization. Dielectric and other relevant electrical properties were measured and the results showed a little possibility in ferroelectric gate random access memory devices.ces.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.339-342
• /
• 1998

Ferroelectric L $a_2$ $Ti_2$ $O_{7}$(LTO) thin films were prepared by chemical solution deposition processes. Acetylacetone was used as chelating agent and nitric acid was added in the stock solution to control hydrolysis and condensation reaction rate. The LTO thin films were spin-coated on Pt/Ti/ $SiO_2$/(100)Si and Pt/Zr $O_2$/ $SiO_2$/(100)Si substrates. After multiple coating, dried thin films were heat-treated for decomposition of residual organics and crystallization. The role of acetylacetone in Ti iso-propoxide stabilization by possibly substituting $O^{i}$Pr ligand was studied by H-NMR. B site-rich impurity phase, i.e. L $a_4$ $Ti_{9}$ $O_{24}$, was found after annealing, where its appearance was dependent on process temperature indicating the possible reaction with substrate. Dielectric and other relevant electrical properties were measured and the results were compared between modified sol-gel and MOD processes.s.s.

• 한국분말재료학회지
• /
• 제16권4호
• /
• pp.254-261
• /
• 2009

In this study, we investigated the unit process parameters in spherical $UO_2$ kernel preparation. Nearly perfect spherical $UO_3$ microspheres were obtained from the 0.6M of U-concentration in the broth solution, and the microstructure of the $UO_2$ kernel appeared the good results in the calcining, reducing, and sintering processes. For good sphericity, high density, suitable microstructure, and no-crack final $UO_2$ microspheres, the temperature control range in calcination process was $300{\sim}450^{\circ}C$, and the microstructure, the pore structure, and the density of $UO_2$ kernel could be controlled in this temperature range. Also, the concentration changes of the ageing solution in aging step were not effective factor in the gelation of the liquid droplets, but the temperature change of the ageing solution was very sensitive for the final ADU gel particles.

• 대한환경공학회지
• /
• 제31권10호
• /
• pp.927-932
• /
• 2009

난분해성 및 독성 폐수 처리는 고급산화 기술과 생물학적 처리가 친화결합(intimate coupling) 을 이룰 때 최적의 효과를 거둘 수 있다. 본 연구에서는 광촉매 산화와 생물학적 처리를 친화결합하도록 고안된 다공성 $TiO_2$ 코팅 담체를 제조하여 광촉매 반응에 관한 동력학 연구를 수행하였다. 저온 sol-gel 코팅법으로 제조된 PVA 재질의 다공성 $TiO_2$ 담체는 UV 조사하에서 methylene blue (MB)를 효율적으로 분해하였다. 시험 농도(최대 100 ${\mu}M$)에서 MB의 흡착속도는 1차반응 (first-order reaction)의 성질을 보였으며, 흡착과 산화를 포함한 총반응속도는 유사 Langmuir 모델로 예측 가능하였다. 이러한 원인은 담체 표면에 MB가 흡착됨에 따라 UV 조사에 의하여 광촉매 반응이 일어날 표면이 줄어들었기 때문인 것으로 판단된다. 다공성 $TiO_2$ 담체의 단위 $TiO_2$ 량당 최대 MB 제거속도는 슬러리 $TiO_2$ 반응기에서 얻은 MB 제거속도보다 4배 더 빨랐다. 본 연구로 인하여 저온 sol-gel 코팅법으로 제조한 PVA 재질 다공성 $TiO_2$ 담체가 성공적인 광분해 반응을 나타내는 것이 확인되었으며, 동 담체에 대한 광촉매 반응의 동력학적 성질이 구명되어, 향후 생물처리를 친화결합 시킬 수 있는 연구 바탕을 확보하였다.