• Korean Journal of Environment and Ecology
• /
• v.26 no.5
• /
• pp.707-718
• /
• 2012

This study was conducted to monitor 4 years of changes in the vegetation structure starting from 2007 when restoration began and propose vegetation management ideas for the riparian ecological restoration areas in the purchased land around Nakdonggang(River). The study was conducted in each of 15 locations ($208,342m^2$) in the riparian ecological restoration areas in November 2007, September 2008, October 2009 and September 2010. The analysis results of the changes in planting species and population showed that, in the case of trees, Acer pseudo-sieboldianum, Quercus acutissima, Acer ginnala, Quercus aliena, Quercus variabilis indicated relatively little changes in their numbers and Quercus dentata, Cornus walteri, Morus alba, Styrax obassia, Sorbus alnifolia var. macrophylla indicated a 100% withering rate. Most shrubs withered due to the oppressive pressure of herbs and climbing plants. The planting density decreased over 4 years on average 28 plants/$100m^2$ to 20 plants/$100m^2$ to 16 plants/$100m^2$. Shortly after the restoration, The the amount of growth was reduced by restoration stress. however as time goes on after the restoration tended to stabilize. The changes in the basal area showed a decrease from $507.1cm^2/100m^2$ in 2007 right after restoration to $301.8cm^2/100m^2$ in 2008 and afterwards showed an increasing trend by going to $324.9cm^2/100m^2$ in 2009 and $372.7cm^2/100m^2$ in 2010. To improve the planting structure of the riparian ecological restoration area, the selection of tree species that have been considered for soil moisture and the differentiation of suitable planting structures that have been considered for local conditions were needed.

• Korean Journal of Environment and Ecology
• /
• v.34 no.5
• /
• pp.358-371
• /
• 2020

As climate change is expected to lead to a severe reduction of biodiversity, studies to investigate the reasons for habitat loss, growth decline, and death of Korean fir (Abies koreana Wilson), endangered alpine/subalpine species in Korea, have been conducted for years but found no clear answer yet. This study reviewed previous studies on Korean fir published in the journals in the past 40 years, 1980 through 2020, into 10-year units, examined the study trend by period, region, and subject with a focus on ecological studies, and analyzed the study results. The ecological studies were categorized into evolutionary ecology, physiological ecology, population ecology, and landscape ecology. Based on the results, we suggested the required research fields in the future. We found a total of 73 papers published in the past 40 years and 48 (65.8%) of them published in the past 10 years. In terms of region, Mt. Halla accounted for the most as 41 papers were on it. In terms of ecological subjects, the physiological ecology accounted for the most with 38, and the evolutionary ecology accounted for the least with 10. The review of the study results showed that many studies identified water stress caused by the water resource imbalance due to temperature increase and spring precipitation reduction following climate change as the main reason for the decline and habitat loss of Korean fir. However, recent studies suggested other factors, such as soil environment, disturbing organisms, and climatic events. The cause of the decline and death of the Korean fir not yet being clearly identified is that most of the studies dealt with the basic content, were carried out intermittently, and were concentrated in some regions. Therefore, we need long-term studies with advanced technology in each study subject at a local scale to find the cause of Korean fir decline and present sustainable management and conservation. Moreover, it is necessary to extend our study subjects to ecosystem ecology and systems ecology to integrate the results from various study subjects for a comprehensive understanding of the reason for Korean fir declines. The results of comprehensive studies could provide clearer answers for Korean fir's declines and the alternatives of conservation management and practices.

• Korean Journal of Poultry Science
• /
• v.40 no.2
• /
• pp.97-103
• /
• 2013

The present study examined effects of production performance, immune activity and egg quality by raising on exercise yard in laying Hens, the results of which could be used as baseline data to enhance animal welfare and the safety of livestock products. A total of 90 Hy-line-Brown laying hens of 13 weeks old were used in the experiment for 38 weeks. The cage group (Cage group) was raised in a cage, where an area of $0.084m^2$ was assigned to two hens, while hens in the exercise yard $1.1m^2$ group ($1.1m^2$ group) was assigned to a combination of a chicken house ($0.11m^2$) and a exercise yard ($1.1m^2$) per a hen. Hens in the exercise yard $2.2m^2$ group ($2.2m^2$ group) was assigned to a combination of a chicken house ($0.11m^2$) and a exercise yard ($2.2m^2$) per a hen. Treatment was replicated 3 times with ten birds per replication. Ten birds were arranged according to randomized block design. While initial egg production rate was significantly higher in the Cage group, $1.1m^2$ group exhibited a slightly higher rate in the mid- and late-stage of the experiment, although the difference was not statistically significant. Exercise yard treatment groups exhibited a higher feed intake rate than the Cage group up until the hens were 39 weeks old (P<0.05), but the difference dissipated from that age on. The age at first egg in the exercise yard treatment groups was 16 days later than that for the Cage group (P<0.05), although differences in the quality of the eggs were not observed. The results of immune activity test showed that IgA in the exercise yard treatment groups was significantly higher than that in the Cage group (P<0.05). IgG, IgM, and corticosterone were also higher in the exercise yard treatment groups. The soil in exercise yard increased of organic matter and decreased of cation exchange capacity (CEC) in raised hens. In sum, raising hens in a exercise yard raise style decreased the rate of initial egg production, which was followed by a slight increase during the latter part of the experiment. The exercise yard raise hens' immune activity was heightened.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.8-9
• /
• 2017

Soybean yield has been low and unstable in Japan and other areas in East Asia, despite long history of cultivation. This is contrasting with consistent increase of yield in North and South America. This presentation tries to describe perspective of breaking stagnation of soybean yield in East Asia, considering the factors of the different yields between regions. Large amount of rainfall with occasional dry-spell in the summer is a nature of monsoon climate and as frequently stated excess water is the factor of low and unstable soybean yield. For example, there exists a great deal of field-to-field variation in yield of 'Tanbaguro' soybean, which is reputed for high market value and thus cultivated intensively and this results in low average yield. According to our field survey, a major portion of yield variation occurs in early growth period. Soybean production on drained paddy fields is also vulnerable to drought stress after flowering. An analysis at the above study site demonstrated a substantial field-to-field variation of canopy transpiration activity in the mid-summer, but the variation of pod-set was not as large as that of early growth. As frequently mentioned by the contest winners of good practice farming, avoidance of excess water problem in the early growth period is of greatest importance. A series of technological development took place in Japan in crop management for stable crop establishment and growth, that includes seed-bed preparation with ridge and/or chisel ploughing, adjustment of seed moisture content, seed treatment with mancozeb+metalaxyl and the water table control system, FOEAS. A unique success is seen in the tidal swamp area in South Sumatra with the Saturated Soil Culture (SSC), which is for managing acidity problem of pyrite soils. In 2016, an average yield of $2.4tha^{-1}$ was recorded for a 450 ha area with SSC (Ghulamahdi 2017, personal communication). This is a sort of raised bed culture and thus the moisture condition is kept markedly stable during growth period. For genetic control, too, many attempts are on-going for better emergence and plant growth after emergence under excess water. There seems to exist two aspects of excess water resistance, one related to phytophthora resistance and the other with better growth under excess water. The improvement for the latter is particularly challenging and genomic approach is expected to be effectively utilized. The crop model simulation would estimate/evaluate the impact of environmental and genetic factors. But comprehensive crop models for soybean are mainly for cultivations on upland fields and crop response to excess water is not fully accounted for. A soybean model for production on drained paddy fields under monsoon climate is demanded to coordinate technological development under changing climate. We recently recognized that the yield potential of recent US cultivars is greater than that of Japanese cultivars and this also may be responsible for different yield trends. Cultivar comparisons proved that higher yields are associated with greater biomass production specifically during early seed filling, in which high and well sustained activity of leaf gas exchange is related. In fact, the leaf stomatal conductance is considered to have been improved during last a couple of decades in the USA through selections for high yield in several crop species. It is suspected that priority to product quality of soybean as food crop, especially large seed size in Japan, did not allow efficient improvement of productivity. We also recently found a substantial variation of yielding performance under an environment of Indonesia among divergent cultivars from tropical and temperate regions through in a part biomass productivity. Gas exchange activity again seems to be involved. Unlike in North America where transpiration adjustment is considered necessary to avoid terminal drought, under the monsoon climate with wet summer plants with higher activity of gas exchange than current level might be advantageous. In order to explore higher or better-adjusted canopy function, the methodological development is demanded for canopy-level evaluation of transpiration activity. The stagnation of soybean yield would be broken through controlling variable water environment and breeding efforts to improve the quality-oriented cultivars for stable and high yield.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.39 no.4
• /
• pp.227-234
• /
• 2019

This study was performed to investigate the effect of heat-stressed environment on rumen microbial diversity in Holstein cows. Rectal temperature and respiration rate were measured and rumen fluid was collected under normal environment (NE; Temperature humidity index (THI)=64.6) and heat-stressed environment (HE; THI=87.2) from 10 Holstein cows (60±17.7 months, 717±64.4 kg) fed on the basis of dairy feeding management in National Institute of Animal Science. The rumen bacteria diversity was analyzed by using the Illumina HiSeq^TM 4000 platform. The rectal temperature and respiratory rate were increased by 1.5℃ and 53 breaths/min in HE compared to that in NE, respectively. In this study, HE exposure induced significant changes of ruminal microbe. At phylum level, Fibrobacteres were increased in HE. At genus level, Ruminococcaceae bacterium P7 and YAD3003, Butyrivibrio sp. AE2032, Erysipelotrichaceae bacterium NK3D112, Bifidobacterium pseudolongum, Lachnospiraceae bacterium FE2018, XBB2008, and AC2029, Eubacterium celulosolvens, Clostridium hathewayi, and Butyrivibrio hungatei were decreased in HE, while Choristoneura murinana nucleopolyhedrovirus, Calothrix parasitica, Nostoc sp. KVJ20, Anabaena sp. ATCC 33047, Fibrobacter sp. UWB13 and sp. UWB5, Lachnospiraceae bacterium G41, and Xanthomonas arboricola were increased in HE. In conclusion, HE might have an effect to change the rumen microbial community in Holstein cows.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.7
• /
• pp.37-47
• /
• 2017

In this study, a series of full-scale field tests on prebored and precast steel pipe piles and the corresponding numerical analysis have been conducted in order to study the characteristics of pile load-settlement relations and shear stress transfer at the pile-soil interface. Dynamic pile load tests (EOID and restrike) have been performed on the piles and the estimated design pile loads from EOID and restrike tests were analysed. Class-A type numerical analyses conducted prior to the pile loading tests were 56~105%, 65~121% and 38~142% respectively of those obtained from static load tests. In addition, design loads estimated from the restrike tests indicate increases of 12~60% compared to those estimated in the EOID tests. The EOID tests show large end bearing capacity while the restrike tests demonstrate increased skin friction. When impact energy is insufficient during the restrike tests, the end bearing capacity may be underestimated. It has been found that total pile capacity would be reasonably estimated if skin friction from the restrike tests and end bearing capacity from the EOID are combined. The load-settlement relation measured from the static pile load tests and estimated from the numerical modelling is in general agreement until yielding occurs, after which results from the numerical analyses substantially deviated away from those obtained from the static load tests. The measured pile behaviour from the static load tests shows somewhat similar behaviour of perfectly-elastic plastic materials after yielding with a small increase in the pile load, while the numerical analyses demonstrates a gradual increase in the pile load associated with strain hardening approaching ultimate pile load. It has been discussed that the load-settlement relation mainly depends upon the stiffness of the ground, whilst the shear transfer mechanism depends on shear strength parameters.

• Korean Journal of Environment and Ecology
• /
• v.36 no.3
• /
• pp.338-349
• /
• 2022

This study aims to investigate whether modular community planting, which entailed planting a variety of species of seedlings at high density, was more effective in restoring natural forests than the existing mature tree planting. We also investigated whether the planting density of the modular community planting facilitates growth or improves the tree layer coverage. We conducted outdoor experiments in which the samples were divided into a mature tree planting plot (control plot), where mature trees were planted at wide intervals, and a modular community planting (MCP) plot (treatment plot), where multiple seedlings were planted in high density. The MCP plot was further divided into the plot in which 3 seedlings were planted per m² and the plot of 1 seedling per m². We measured the specimens' survival rate, growth rate (tree height, crown width, and root collar diameter), and cover rate for 26 months from May 2019 and the predicted future tree height growth using the measured tree height. The survival rate and relative growth rate of the MCP were higher than those of the mature tree planting plot. The vertical coverage rate of the tree crown in the MCP exhibited complete coverage of the ground before 23 months, while the coverage rate of the mature tree planting decreased due to transplantation stress. The seedlings in the MCP, which were planted at high density, grew well and were predicted to grow higher than the mature trees in the large tree planting plot within 5 to 6.5 years after planting. It was due to multiple species, seedlings, high-density planting, and planting foundation improvements, such as soil enhancement and mulching. In other words, the seedlings planted in the MCP had a higher survival rate as their environmental adaptation after planting was better, and their early growth was also larger than the trees in the mature planting plot. The high-density mixed planting of various native species not only mitigated the inter-complementary environmental pressures but also facilitated growth by inducing competition between species. Moreover, the planting foundation improvement effectively increased the seedlings' viability and growth rate. A reduction in follow-up management costs is expected as the tree layer coverage sharply increases due to the higher planting density. In the MCP (3 seedlings per m² and 1 seedling per m²), the tree height growth was promoted with the higher planting density, and the crown width and root collar diameter tended to be larger with the lower planting density, but these differences were not statistically significant.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.6
• /
• pp.71-82
• /
• 2006

One of the most popular pre-reinforcement methods of tunnel heading in cohesionless soils would be the fore-polling of grouted pipes, known as RPUM (reinforced protective umbrella method) or UAM (umbrella arch method). This technique allows safe excavation even in poor ground conditions by creating longitudinal arch parallel to the tunnel axis as the tunnel advances. Some previous studies on the reinforcing effects have been performed using numerical methods and/or laboratory-based small scale model tests. The complexity of boundary conditions imposes difficulties in representing the tunnelling procedure in laboratory tests and theoretical approaches. Full-scale study to identify reinforcing effects of the tunnel heading has rarely been carried out so far. In this study, a large scale model testing for a tunnel in granular soils was performed. Reinforcing patterns considered are four cases, Non-Reinforced, Crown-Reinforced, Crown & Face-Reinforced, and Face-Reinforced. The behavior of ground and pipes as reinforcing member were fully measured as the surcharge pressure applied. The influences of reinforcing pattern, pipe length, and face reinforcement were investigated in terms of stress and displacement. It is revealed that only the Face-Reinforced has decreased sufficiently both vertical settlement in tunnel heading and horizontal displacement on the face. Vertical stresses along the tunnel axis were concentrated in tunnel heading from the test results, so the heading should be reinforced before tunnel advancing. Most of maximum axial forces and bending moments for Crown-reinforced were measured at 0.75D from the face. Also it should be recommended that the minimum length of the pipe is more than l.0D for crown reinforcement.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.1
• /
• pp.57-70
• /
• 2009

Considerable advance has been made on research on effect of steel pipe Umbrella Arch Method (UAM) and mechanical reinforcement mechanism through numerical analyses and experiments. Due to long analysis time of three-dimensional analysis and its complexity, un-quantitative two-dimensional analysis is dominantly used in the design and application, where equivalent material properties of UAM reinforced area and ground are used, For this reason, development of reasonable, theoretical, quantitative and easy to use design and analysis method is required. In this study, both field UAM tests and laboratory tests were performed in the residual soil to highly weathered rock; field tests to observe the range of reinforcement, and laboratory tests to investigate the change of material properties between prior to and after UAM reinforcement. It has been observed that the increase in material property of neighboring ground is negligible, and that only stiffness of steel pipe and cement column formed inside the steel pipe and the gap between steel pipe and borehole contributes to ground reinforcement. Based on these results and concept of Convergence Confinement Method (CCM), two dimensional axisymmetric analyses have been performed to obtain the longitudinal displacement profile (LDP) corresponding to arching effect of tunnel face, UAM effect and effect of supports. In addition, modified load distribution method in two dimensional plane-strain analysis has been suggested, in which effect of UAM is transformed to internal pressure and modified load distribution ratios are suggested. Comparison between the modified method and conventional method shows that larger displacement occur in the conventional method than that in the modified method although it may be different depending on ground condition, depth and size of tunnel, types of steel pipe and initial stress state. Consequently, it can be concluded that the effect of UAM as a beam in a longitudinal direction is not considered properly in the conventional method.

• Korean Journal of Agricultural Science
• /
• v.15 no.1
• /
• pp.47-68
• /
• 1988

This study was conducted to define the optimal conditions for embryo growth during seed stratification and for breaking dormancy as well as seed germination of stratified ginseng seeds. The experiments were also carried out to detect some materials which were expected to induce seed dormancy in the ginseng seeds. The results summarized as follows; 1. The growth of embryo during seed stratification was significantly inhibited by the existence of endocarp. The fastest embryo growth was resulted at $15^{\circ}C$ and an estimated optimal temperature for embryo growth was about $18^{\circ}C$. 2. There was no significant difference between the embryo growth and germination ratio of ginseng seeds which were sown in seed bed at Aug-5 without seed stratification and that of artificial seed stratification. 3. Embryo growth and germination ratio was significantly inhibited by high temperature treatment at $30^{\circ}C$ for 24 hours or respiration stress by immersing seeds in water for 10 days or more. 4. When the seed stratification was started at $10^{\circ}C$, growth of embryo in the ginseng seeds were almost stopped. But, when the seeds were stratified first at $20^{\circ}C$ for 50 days and next at $10^{\circ}C$ for 50 days, the embryo growth was significantly promoted compared with the embryo growth in the seeds which were stratified at $20^{\circ}C$ for 100 days. 5. The successive embryo growth after seed stratification was significantly accelerated at $10^{\circ}C$ but the seeds chilled at $5^{\circ}C$ for 100 days were resulted in the highest germination ratio as well as the shortest days for germination. 6. The successive embryo growth during chilling treatment and seed germination were significantly inhibited by immersing seeds in water just before chilling treatment or during chilling treatment and by interruption of chilling treatment with raising temperature to $20^{\circ}C$ for 20 days during chilling treatment. 7. The germination ratio of ginseng seeds which finished chilling treatment was highest at $10^{\circ}C$ and 62.5% was the estimated soil moisture for the best germination of ginseng seeds. The ginseng seeds were found to require high amount of oxygen for germination. 8. Only water soluble material in homogenized ginseng seeds showed a significant inhibiting effect on the seed germination of sesame, millet and soybean. Water soluble material dissolved from undehisced ginseng seeds showed stronger inhibiting effect on the seedling growth of sesame than material from dehisced ginseng seeds. Extraction temperature did not influence the inhibiting effect of the material dissolved from ginseng seeds on the seedling growth of sesame. 9. Water soluble materials dissolved from the berry pulps, leaves, fresh roots and dried roots also showed a significant inhibiting effect on the seedling growth of sesame. 10. Water soluble materials dissolved from the ginseng seeds, leaves and fresh roots showed a significant inhibiting effect on the germination of true fungi and the growth of spawn but the growth of phytopathogenic bacteria was not. 11. Among the water soluble materials dissolved from ginseng seeds, the materials of low molecular weight less than 3,000 were resulted a significant inhibiting effect on the seedling growth of sesame and the materials of high molecular weight also showed an inhibiting effect.