• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.4
• /
• pp.119-128
• /
• 2008

In this study, we attempted to seek out the ways to recycle fresh root-chips in the slope revegetation works by breaking tree root wastes occurring during the construction works, also to review the applicability of fresh root-chips as the soil media in slope revegetation works. For this purpose, we organized test units in order to investigate on-site applicability of fresh root-chips (broken chips). In order to examine the desirable ration of combining fresh root-chips with the hydroseeding soil media on the cutting slopes, we organized test units depending on the amount of combination. The following is the main experimental results. 1. At first, we analyzed properties of hrdro-seeding soil media and soil of the experimental sites. The overall results demonstrate that all the test units show proper range for vegetation. 2. We believe that the physical properties of soils in the earlier phase of restoration works on the sloped sites are not greatly affected by the fact whether broken chips exist or not. However, as time elapses, broken chips needs to be investigated further on what kind of impact they have on the soil condition. 3. More species are found in the test unit combining broken chips and we believe that it will contribute to blossoming of green plants and ecological succession of neighboring plants. 4. We performed experiment on possibility for fresh root-chips as substitutes for the hydro-seeding soil-media. In the test unit that combines fresh root-chips, its mixture ratio tends to exceed that of the test unit that does not combine fresh root-chips by 5 %. In case of the Thick-Layer-Soil-Media Hydroseeding works, the mixture ratio of the test unit that combines fresh root-chips after 16 weeks exceeds that of the test unit that does not combine fresh root-chips by 75%. 5. From the result of our experiment, it is obvious that the ratio of mixture and the number of emerging species are higher for the test unit combining fresh root-chips than the test unit that does not combine them. In other words, we can replace the hydro-seeding-soil-media with some Fresh root-chips without affecting the physical property of soil.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.6
• /
• pp.19-23
• /
• 2022

For the substantiation and verification of studies related to the construction of a levee using riverbed soil, real-scale levee construction and experimental studies are essential. One of the most important factors in the experimental study is the reproducibility of the multiple levees with the same initial conditions. Quantitative analysis of the reproducibility should be presented. In this study, a number of physical properties (specific gravity test, sieving test, liquid-plastic limit test, compaction test, on-site Density test) for multiple embankments built with fine-grained bed soil was obtained. The collected data then used to obtain the possibility of reproducing levee through statistical analysis to suggest a process of indicating a numeric initial condition of the real-scale test. As a result of statistical analysis to verify the aforementioned process, it was confirmed that it was possible to quantitatively evaluate the reproducibility of the construction under the same conditions of embankments. This is expected to be a basic data for a full-scale embankment test using riverbed soil including other soil based real-scale tests.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.5
• /
• pp.172-179
• /
• 2010

This study was conducted to establish a management plan for the Songrim woodland restoration by analyzing the site characteristics of the Songrim Woodland Natural Monument (Natural Monument 445) in Hadong-Gun, Gyeongsangnam-Do, Korea. The Songrim woodland was a pure pine forest. To stimulate the growth of sub-trees or mid- story vegetation in both a non-rest year forest and a rest year forest, it is recommended to take a silvicultural practices such as pruning because canopy of over-story trees was closely covered. The Songrim woodland in the non-rest year forest severely competed among individual trees of DBH classes of 60 cm and height of 18 m, while the woodland in the rest-year forest competed with DBH classes of 62 cm and height of 10 m, respectively. Soil physical property such as soil hardness, soil pore space rates, and pF 2.7 was restored following the rest-year forest designation. Mean salt concentration in the Songrim woodland soils was 0.006%. The result suggests that it is needed to take a study to prevent the salt inputs to conserve the Songrim woodland.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.65 no.3
• /
• pp.15-28
• /
• 2023

The compaction properties of the soil change depending on the physical properties, and are also affected by crushing of the particles. Since the particle size distribution of soil affects the engineering properties of the soil, it is necessary to analyze the material properties to understand the compaction characteristics. In this study, the size of each sieve was classified into four in the particle size analysis as a material property, and the compaction characteristics were evaluated by multiple regression and maximum dry unit weight. As a result of maximum dry unit weight prediction, multiple regression analysis showed R² of 0.70 or more, and DNN analysis showed R² of 0.80 or more. The reliability of the prediction result analyzed by DNN was evaluated higher than that of multiple regression, and the analysis result of DNN-T showed improved prediction results by 1.87% than DNN. The prediction of maximum dry unit weight using particle size distribution seems to be applied to evaluate the compacting state by identifying the material characteristics of roads and embankments. In addition, the particle size distribution can be used as a parameter for predicting maximum dry unit weight, and it is expected to be of great help in terms of time and cost of applying it to the compaction state evaluation.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.66 no.1
• /
• pp.15-24
• /
• 2024

Unlike artificially created homogeneous materials, the process of calculating the elastic modulus of natural soil involves the possibility of errors. Because the stress-strain behavior of soil is nonlinear, the secant modulus of elasticity is often used based on 1/2 of the stress at failure. Since soil has the property of changing its elastic modulus depending on the confining pressure, numerical analysis models that analyze its behavior inevitably include complex elements. The hyperbolic model, which relatively accurately simulates the behavior immediately after loading in soft ground, assumes that the stress-strain curve of the consolidated undrained triaxial test is hyperbolic and requires the slope of the tangent line at the starting point. However, the slope of the initial tangent in the stress-strain curve obtained from an actual triaxial test is difficult to have regularity according to changes in confining pressure. Additionally, due to the characteristics of a hyperbola, even small changes in related factors cause large changes in the hyperbola. Therefore, there is a lot of randomness in the process of calculating model parameters from the triaxial test results, which causes large differences in the results. Therefore, the method of calculating the initial elastic modulus by the consolidation test presented in this study is also used to verify the method by the triaxial test. It can be applied. However, since this study was applied to only one sample showing typical consolidation characteristics, it is necessary to check samples with various physical properties in the future.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.6
• /
• pp.123-132
• /
• 2019

This study is to estimate the spatial soil moisture using Terra MODIS (Moderate Resolution Imaging Spectroradiometer) satellite data and machine learning technique. Using the 3 years (2015~2017) data of MODIS 16 days composite NDVI (Normalized Difference Vegetation Index) and daily Land Surface Temperature (LST), ground measured precipitation and sunshine hour of KMA (Korea Meteorological Administration), the RDA (Rural Development Administration) 10 cm~30 cm average TDR (Time Domain Reflectometry) measured soil moisture at 78 locations was tested. For daily analysis, the missing values of MODIS LST by clouds were interpolated by conditional merging method using KMA surface temperature observation data, and the 16 days NDVI was linearly interpolated to 1 day interval. By applying the RNN-LSTM (Recurrent Neural Network-Long Short Term Memory) artificial neural network model, 70% of the total period was trained and the rest 30% period was verified. The results showed that the coefficient of determination ($R^2$), Root Mean Square Error (RMSE), and Nash-Sutcliffe Efficiency were 0.78, 2.76%, and 0.75 respectively. In average, the clay soil moisture was estimated well comparing with the other soil types of silt, loam, and sand. This is because the clay has the intrinsic physical property for having narrow range of soil moisture variation between field capacity and wilting point.

• Journal of Drive and Control
• /
• v.20 no.4
• /
• pp.71-79
• /
• 2023

In the field of agricultural machinery, various on-field tests are conducted to measure design load for optimal design of agricultural equipment. However, field test procedures are costly and time-consuming, and there are many constraints on field soil conditions due to weather, so research on utilizing simulation to overcome these shortcomings is needed. Therefore, this study aimed to model agricultural soils using discrete element method (DEM) software. To simulate draft force, predictions are made according to travel speed and compared to field test results to validate the prediction accuracy. The measured soil properties are used for DEM modeling. In this study, the soil property measurement procedure was designed to measure the physical and mechanical properties. DEM soil model calibration was performed using a virtual vane shear test instead of the repose angle test. The DEM simulation results showed that the prediction accuracy of the draft force was within 4.8% (2.16~6.71%) when compared to the draft force measured by the field test. In addition, it was confirmed that the result was up to 72.51% more accurate than those obtained through theoretical methods for predicting draft force. This study provides useful information for the DEM soil modeling process that considers the working speed from the perspective of agricultural machinery research and it is expected to be utilized in agricultural machinery design research.

• Journal of Korean Society of Forest Science
• /
• v.96 no.1
• /
• pp.89-95
• /
• 2007

This study was carried out to evaluate soil properties by regions from chestnut (Castanea crenata Sieb. et Zucc) stands in Gyeongnam province. Soil physical and chemical properties were measured from soil samples of top 20 em collected from three hillslopes (upper, middle, lower) of the chestnut stands in six regions (Jinjusi, Sacheonsi, Sancheonggun, Hadonggun, Goseonggun, Hapcheongun) where are major chestnut cultivation areas throughout the province. Soil properties were significantly different among regions (p<0.05), while were not significantly different among hillslopes (p>0.05). Soil bulk density, soil pore space, soil pH, organic matter content, total nitrogen, available phosphorus, and CEC were significantly different among regions (p<0.05). Soil bulk density was significantly lower (p<0.05) in Hadonggun ($0.96g/cm^3$ than in other regions ($1.12{\sim}1.22g/cm^3$). Soil pH was below pH 5.03 in most regions and Sancheonggun showed the lowest soil pH value (pH 4.62), followed by Jinjusi, Hadonggun, Hapcheongtm, Goseonggun, and Sacheonsi. Organic matter content was highest in Hadonggun (6.46%), while other regions ranged between 2.93% and 3.47%. Total nitrogen content showed a similar trend like the organic matter content. Available phosphorus was above 100 ppm in Jinjusi, Hadonggun and Sancheonggun, but Sacheonsi showed the lowest concentration (15 ppm) among the regions. Cation Exchange Capacity (CEC) was above 10 cmolc/kg in Goseonggun and Hadonggun, but below 8.6 cmolc/kg in Jinjusi and Hapcheongtm. Potassium content ranged between 0.07 and 0.14 cmolc/kg, and magnesium was above 0.66 cmolc/kg in all regions. The results indicate that soil property in chestnut stands was different among regions in Gyeongnam province. This suggested that the chestnut stands should be managed by the fertilization application reflected in the variability of regional soil property in chestnut stands.

• Journal of Conservation Science
• /
• v.25 no.2
• /
• pp.155-160
• /
• 2009

This study is designed to optimize the method of using SE-101 for strengthening the durability and the stabilization of moving historical site. The permeability and the shear strength of The epoxy SE-101 with low viscosity were measured on different particle sizes and moisture content of soil. Like it can be expected from the data of viscosity, as the soil particle size was increased, the permeability was also increased, while the shear strength was decreased. And especially, it is noted that the deviation of permeability can be more extreme according to the different hardening speed of macromolecule and mineral additives. As the rate of moisture content in soil sample is increased, the deviation between permeability and shear strength is also increased. Even though among the same soil sample, some parts of it can be weaker than others, which cause the breakages of epoxy products. Thus, it is necessary that the soil should be dried over 50% of permeation depth of SE-101 before use.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.963-969
• /
• 2011

The river-bed sediments from the major river basins were analysed for the chemical and physical properties to evaluate environmental safety for the agricultural uses. The samples were taken from 16 sites of Han river, 36 of Geumgang river, 27 of Yeongsan river, and 140 of Nakdong river. The total of 219 samples from the 28 counties were taken from the surface of the sediments at the depth of 50 cm. The particle density of the sediments was greater than $2.63Mg\;m^{-3}$ and the whole range of the density was $2.60{\sim}2.69Mg\;m^{-3}$, the average particle size was 0.7 mm whereas the size range was 0.075~0.85 mm. The analyses of the particle sizes by basins showed that Han and Geumgang river had particle sizes of 0.075~0.85 mm, while Geumgang and Yeongsan river had particle sizes of 0.25~0.85 mm. Geumgang and Yeongsan river tended to have greater particle sizes. The average values of the chemical properties were 6.3 for pH, $0.16dS\;m^{-1}$ for EC, $8g\;kg^{-1}$ for organic matter, $101mg\;kg^{-1}$ for available phosphate, 0.39, 3.47, and $0.93cmol_c\;kg^{-1}$ for exchangeable potassium, calcium, and magnesium respectively. The greatest property at each basin was pH for Han river, Ec, available phosphate and exchangeable sodium for Geumgang river, organic matter, exchangeable calcium and magnesium for Yeongsan river, and exchangeable potassium for Nakdong river.