• 한국컴퓨터정보학회논문지
• /
• 제3권4호
• /
• pp.70-77
• /
• 1998

시스템 성능평가의 대상은 하드웨어와 소프트웨어로 나누어 평가할 수 있다. 현재 하드웨어의 평가는 부문별로 많이 개발되어 왔지만, 소프트웨어의 성능은 그 대응책 없이 개발되어 온 사례가 많다. 물론 외국에서는 소프트웨어 성능공학 쪽으로 많은 관심을 기울러 소프트웨어 개발도구 및 방법론이 성능공학 문제와 연관하여 제안되고 있다. 그러나 우리나라에서는 거의 전무한 상태인 것은 사실이다. 그래서 본 연구에서는 소프트웨어개발 도구 및 개발방법론을 정의하여 그 내용을 비교하고자 한다.

• Journal of Electrical Engineering and Technology
• /
• 제11권4호
• /
• pp.839-847
• /
• 2016

Energy recovery battery testing systems (ERBTS) have been widely used in battery manufactures. All the ERBTS are connected in parallel which forms a special and complicated micro-grid system, which has the shortcomings of low energy recovery efficiency, complex grid-connected control algorithms issues for islanded detection, and complicated power circuit topology issues. To solve those shortcomings, a DC micro-grid system is proposed, the released testing energy has the priority to be reutilized between various testing system within the local grid, Compared to conventional scheme, the proposed system has the merits of a simplified power circuit topology, no needs for synchronous control, and much higher testing efficiency. The testing energy can be cycle-used inside the local micro-grid. The additional energy can be recovered to AC-grid. Numerous experimental comparison results between conventional and proposed scheme are provided to demonstrate the validity and effectiveness of the proposed technique.

• 한국국방경영분석학회지
• /
• 제22권2호
• /
• pp.90-112
• /
• 1996

Research issues in software engineering in recent may be object oriented methodology and software quality. Since Halstead has proposed metric-software science in 1977, software quality area has been studied in steady but inactively until 1980s. As international standards such as ISO 9000-3, 9126 were enacted in 1990s early, interest in software quality is increased but many problems such as how to validate metric, measure quality or apply metric are remained. This paper proposes software quality metric methodology which software developer or project manager can use in measuring quality and validating metric during software development. The methodology is classified by several phases: establishment of quality requirement, identification of quality metric, data collection, metric implementation, metric validation. In order to show its applicability, test program, metrics and data are applied to each phase of the methodology. Consideration of this methodology as a methodology for software quality measurement similar to development methodology for software development is needed.

• 품질경영학회지
• /
• 제44권1호
• /
• pp.29-42
• /
• 2016

Purpose: This paper reviews the papers on reliability issues which are published in the Journal of the Korean Society for Quality Management (KSQM) since 1965. The literature review is purposed to survey a variety of reliability issues for several categories Methods: We divide all of reliability issues into 9 categories: acceleration test, reliability estimation, system reliability, software reliability, reliability data collection and analysis method, lifetime distribution, maintenance and warranty strategy, reliability applications, and reliability applications to military area Results: Dividing all of papers on reliability published in KSQM for 50 years into 9 categories, we provide a chronological roadmap for individual categories, and summarize the contents and contributions of surveyed papers Conclusion: The review paper is expected to provide future direction to improve reliaiblity theories and applications in manufacturing and service industries

• Nuclear Engineering and Technology
• /
• 제50권8호
• /
• pp.1255-1265
• /
• 2018

The need for a PSA (Probabilistic Safety Assessment) for a multi-unit at a site is growing after the Fukushima accident. Many countries have been studying issues regarding a multi-unit PSA. One of these issues is the problem of many combinations of accident sequences in a multi-unit PSA. This paper deals with the methodology and software to quantify a PSA scenarios for a multi-unit site. Two approaches are developed to quantify a multi-unit PSA. One is to use a minimal cut set approach, and the other is to use a Monte Carlo approach.

• 한국중재학회지:중재연구
• /
• 제13권2호
• /
• pp.547-584
• /
• 2004

Information technology(IT) is changing rapidly based on growth of internet and computer businesses. Therefore, computer programs and softwares are distributed to computer users promptly for their productivity increase and efficient work. So, in the distribution, the softwares will be copied or released through network or other methods which are not authorized by the program owners. In that case, copyright dispute is incurred and various issues are come out due to infringement of the software copyright. Thus, the purpose of this study is to research infringement cases of the software copyright and how to settle the dispute which is related with software programs. To achieve the purpose of this study, this research consisted of 5 chapters. At chapter 1 introduction, it mentioned necessity of this study, purpose and how to research this study, and at chapter 2 dispute factors indicated and summarized for technical resolution. At chapter 3, infringement cases of software copyright analyzed and studied upon intellectual property(IP) related laws. And methods of dispute settlement discussed and suggested to chapter 4 for copyright and intellectual property protection. Also, it emphasized importance of arbitration to resolve the issues timely and avoid time and economical consumption. Of course, arbitration law has to be matched with the trend of technology development for effective settlement. At chapter 5 conclusion, it summarized this research and suggested further research for empirical test of economic value of the software copyright upon the aspect of business, law, and engineering. In this study, the results are 1) IP related laws have to be enacted or revised to meet technical changes for the protection of software copyright on time. The enactment or the revision of law takes a long time, therefore, to deal the dispute effectively, 2) arbitration law has to be utilized efficiently in order to resolve issues and settle the dispute promptly. It is suggested the dispute settlement through arbitration to save time and economic matters for legislation, and to harmony with the technology trends. 3) Recognition of software copyright is to be improved by users and enterprises for development of software related industries and intellectual property protection. In conclusion, the protection of software copyright is important than any other things in the field of IT because of the development of industry and intellectual property related laws. The development is for areas of business, law and engineering, so research and practices are to be combined with the areas so that it could resolve the dispute settlement and IP protection effectively.

• International Journal of Computer Science & Network Security
• /
• 제22권9호
• /
• pp.143-148
• /
• 2022

Component-based software development (CBD) is a methodology that has been embraced by the software industry to accelerate development, save costs and timelines, minimize testing requirements, and boost quality and output. Compared to the conventional software development approach, this led to the system's development being completed more quickly. By choosing components, identifying systems, and evaluating those systems, CBSE contributes significantly to the software development process. The objective of CBSE is to codify and standardize all disciplines that support CBD-related operations. Analysis of the comparison between component-based and scripting technologies reveals that, in terms of qualitative performance, component-based technologies scale more effectively. Further study and application of CBSE are directly related to the CBD approach's success. This paper explores the introductory concepts and comparative analysis related to component-based software engineering which have been around for a while, but proper adaption of CBSE are still lacking issues are also focused.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권5호
• /
• pp.1561-1583
• /
• 2022

Context: Testing is one of the techniques that can assure the quality of software including the domain of Software Product Line (SPL). Various techniques have been deliberated to enhance the quality of SPL including Model-based Testing (MBT). Objective: The objective of this study is to analyze and classify trends of MBT in SPL covering the solutions, issues and evaluation aspects by using taxonomy form. Method: A Systematic Literature Review (SLR) was conducted involving 63 primary studies from different sources. The selected studies were categorized based on their common characteristics. Results: Several findings can guide future research on MBT for SPL. The important finding is that the multiple measurements are still open to improving current metrics to evaluate test cases in MBT for SPL. The multiple types of measurement required a trade-off between maximization and minimization results to ensure the testing method which could satisfy multiple test criteria for example cost and effectiveness at the same time.

• 대한임베디드공학회논문지
• /
• 제7권3호
• /
• pp.135-142
• /
• 2012

The Quality of embedded system depends on the embedded software. As the complexity and the size of embedded software have been increasing, it is more likely that the software may include faults, and the reliability and stability issues are getting more important. In this paper, we propose a remote test tool for software based on VxWorks by using fault injection method. The test tool consists of test server and test client for testing on the cross development environment. The test server operates in the host system and user can not only test but also monitor the software by using it. The test client operates in the target system and it controls kernel objects and sends the input data into the software when receiving the control and data from the test server. We developed the prototype software and demonstrated the ability of testing software robustness by injecting faults.

• 한국해양공학회지
• /
• 제19권6호통권67호
• /
• pp.50-57
• /
• 2005

Ice resistance on ice-transiting vessels is one of th￡ important issues concerning th￡ design of ships with ice classes. In this study, th￡ development of GUI software for estimation of ice resistance on ice-transiting vessels is discussed. lee resistance estimation equations, based on model tests and full-scale sea trial data from many previous research articles, are studied in conjunction with two ship categories i.e., ,icebreakers/supply/tug vessels and ice-strengthened cargo vessels. lee resistance estimation equations are summarized in common format and are compared with each other. The GUI software 'Ice View,' written in MS Visual Basic language, can calculate ice resistances according to varying ice thickness and ship speed. The software can provide the calculated results, with suitable tables and graphs, for easy comparison of each ice resistance estimation equation.