• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.113-120
• /
• 2014

In this paper, we examine Asymmetric Multi-Processing Environment to provide LDW service. Asymmetric Multi-Processing Environment consists of high-speed MCU to support rapid image processing and low-speed MCU for controlling with other ECU at the control domain. Also we designed rapid image process application and LDW application Software Component(SW-C) according to the development process rule of AUTOSAR. To communicate between two MCUs, timer based polling based IPC was designed. Also to communicate with other ECUs(Electronic Control Units), we designed CAN messages to provide alarm information and receiving CAN message to catch the Turn signal. We confirm the possibility of the various ADAS development using an Asymmetric Multi-Processing Environment and AUTOSAR platform. We also expect providing ISO 26262 functional safety.

• Journal of Drive and Control
• /
• v.17 no.1
• /
• pp.27-36
• /
• 2020

The aim of this study is to design a simulation model for an electric All-Wheel-Drive (AWD) tractor to evaluate the performance of the selected component and agricultural work ability. The electric AWD tractor consists of four motors independently for each drive wheel, and each motor is combined with an engine generator, a battery pack, and reducers. The torque data of a 78 kW-class tractor was measured during plow tillage and driving operation to develop a workload cycle. A simulation model was developed by using commercial software, Simulation X, and it used the workload as the simulation condition. As a result of simulation analysis, the drive system, including an electric motor and reducers, was able to cope with high load during plow tillage. The SOC (State of Charge) level was influenced by the output power of the motor, and it was maintained in the range of 50~80%. The fuel consumed by the engine was about 18.23 L during working on a total of 8 fields. The electric AWD tractor was able to perform agricultural work for about 7 hours. In the future study, the electric AWD tractor will be developed reflecting the simulation condition. Research on the comparison between the simulation model and the electric AWD tractor should be performed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.1 s.173
• /
• pp.206-214
• /
• 2000

The pressure tube is a major component of the CANDU reactor, which supports nuclear fuel bundle and it's containment vessel. If a flaw is found during the periodic inspection from the pressure tube s. the integrity evaluation must be carried out. and the safety requirements must be satisfied for continued service. In order to complete the integrity evaluation, complicated and iterative calculation procedures are required. Besides, a lot of data and knowledge for the evaluation are required for the entire: integrity evaluation process. For this reason. an integrity evaluation system, which provides efficient of evaluation with the help of attached databases, was developed. The developed system was built on the basis of ASME Sec. XI and FFSG(Fitness For Service Guidelines for zirconium alloy pressure tubes in operating CANDU reactors) issued by the AECL, and covers the delayed hydride cracking(DHC). This system does not only provide various databases including the 3-D finite element analysis results on pressure tubes, inspection data and design specifications but also is compatible with other commercial database software. In order to verify the developed system, several case studies have been performed and the results were compared with those from AECL. A good agreement was observed between those two results.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.3
• /
• pp.342-349
• /
• 2010

This paper is a foundation work in developing a software for generating infrared images from a scene with various objects. The spectral radiance received by a remote sensor is consisted of the self-emitted, reflected and scattered components. In general, the self-emitted component is the most important part for generating Infrared signatures from the object. In this paper, the infrared image generation considering various surface temperature and optical surface property of a flat plate is demonstrated in MWIR($3{\sim}5{\mu}m$) and LWIR($8{\sim}12{\mu}m$) regions for different spatial resolutions of the images. Resulting spectral radiance values in the MWIR($3{\sim}5{\mu}m$) and LWIR($8{\sim}12{\mu}m$) regions arrived at the infrared sensor are compared numerically and graphically by recognizing that they are strongly dependent on the surface conditions such as the surface temperature and the surface emissivity. And these infrared images are also shown to be strongly dependent on the resolutions of the infrared imaging devices as well. This study reveals that the surface conditions are more dependent on the radiance level from the surface while the resolution of the imaging device is more responsible for identifying the shape of object.

• Journal of Korea Game Society
• /
• v.9 no.2
• /
• pp.29-39
• /
• 2009

Game scenarios are playing more important role as much as games are getting more sophisticated and expanded in their applications. However, general-purpose tools for production of game scenarios are still not developed. There are similar tools for the production of films or dramas and simple tools for the development of UCG. However, analysis about them shows that they are not suitable for the production of game scenarios. In this paper, we are to develop game scenario authoring tool called 'UMa' suitable for game production and easy to use. UMa is composed of synopsis entry, quest entry, DB entry, communication, display, and control component. Since UMa provides templates to make synopsis, quest, and DB, users can produce them very easily. Especially, characters and items DB are stored independently so that they may be reused to the production of scenarios for follow-up or another game. Using UMa, users can write game scenarios more easily and quickly and cooperate with each other at the same time by Web.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.3
• /
• pp.207-213
• /
• 2016

PURPOSE. A recently introduced direct drill-guiding implant surgery system features minimal tolerance of surgical instruments in the metal sleeve by using shank-modified drills and a sleeve-incorporated stereolithographic guide template. The purpose of this study was to evaluate the accuracy of this new guided surgery system in partially edentulous patients using geometric analyses. MATERIALS AND METHODS. For the study, 21 implants were placed in 11 consecutive patients using the direct drill-guiding implant surgery system. The stereolithographic surgical guide was fabricated using cone-beam computed tomography, digital scanning, computer-aided design and computer-assisted manufacturing, and additive manufacturing processes. After surgery, the positional and angular deviations between planned and placed implants were measured at the abutment level using implant-planning software. The Kruskal-Wallis test and Mann-Whitney U test were used to compare the deviations (${\alpha}=.05$). RESULTS. The mean horizontal deviations were 0.593 mm (SD 0.238) mesiodistally and 0.691 mm (SD 0.344) buccolingually. The mean vertical deviation was 0.925 mm (SD 0.376) occlusogingivally. The vertical deviation was significantly larger than the horizontal deviation (P=.018). The mean angular deviation was 2.024 degrees (SD 0.942) mesiodistally and 2.390 degrees (SD 1.142) buccolingually. CONCLUSION. The direct drill-guiding implant surgery system demonstrates high accuracy in placing implants. Use of the drill shank as the guiding component is an effective way for reducing tolerance.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.1
• /
• pp.76-82
• /
• 2017

Since the introduction of electronically controlled engines and electric propulsion ships, the need for an uninterruptible power supply for emergency power supply devices that use batteries has gained importance. The bidirectional converter in such emergency power supply devices is a crucial component. This paper proposes, a topology for an improved DC-DC bidirectional converter that is characterized by a high voltage conversion ratio and low voltage stress of switches. To confirm the performance of the converter, a computer simulation was executed with PSIM software. The conversion ratio of the proposed converter was found to be four times higher than the conventional boost converter in step-up mode and one-fourth that of the conventional buck converter in step-down mode, and the voltage stress of the switches was one-fourth of the high-side voltage. Moreover, the proposed converter was confirmed to be able to distribute equal currents between two interleaved modules without using any extra current-sharing control method because of the charge balance of its blocking capacitors.

• Archives of design research
• /
• v.17 no.2
• /
• pp.437-450
• /
• 2004

Advancement of the media it will be able to express the development and information of computer system causes a problem, how to get the information from plenty of digital data. It needs to the research that provides efficient interface to the user and presents the information visualization standard to the author Consequently, From this paper it investigated analysis of the dynamic diagram and the computer software it led development process of information visualization and result of development outcome. Important developing forms of Information visualization are include Element, Expression, Interface. For developing information visualization model, First, Find the element from many kind of media, include graphic. Second, Find form of the expression from past the diagram which comes to be used plentifully. Last, To get appropriate result it applies the interface, necessary from the interface component which is various uses from computer program. like this, on this paper presents about important three visualization developing forms with detail examples.

• Journal of Korea Multimedia Society
• /
• v.2 no.3
• /
• pp.265-276
• /
• 1999

Video on Demand (VOD) system is definitely one of main applications in upcoming multimedia era. In this research, we have designed and implemented a host-based scalable VOD system (SVOD) which is composed of low cost PC servers and runs on Linux kernel that is currently spotlighted in enterprise and research domains. Our contribution is as follows: first, the previous Ext2 file system was modified to efficiently support continuous media like MPEG stream. Second, the storage server features a host-based scalable architecture. Third, a software MPEG decoder was implemented using Microsoft's DirectShow$\circledR$COM. Finally, flow control between client and server is provided to suppress overflow and underflow of client circular buffer and supports FF VCR operation. We have known that it is possible to develop a thread-based and scalable VOD system on low cost PC servers and free Linux kernel.

• Industrial Engineering and Management Systems
• /
• v.10 no.2
• /
• pp.104-108
• /
• 2011

Technology is one of the major competitive advantages for small and medium enterprises (SME), especially ones operating in the manufacturing sector. Increasing technological capabilities is the basis for SME's business performance improvement. The main problem of SME's is a limitation in the areas of production facilities, technology, and human resources. Some of these constraints cause a decline in business performance and competitiveness of SME's. In this case analysis of technology components has to be carried out to determine the effect of technology on SME's business performance improvement. This study aims to measure the components of technology and to analyze the influence of each technology component on business performance of rattan processing SME's in South Kalimantan. The assessment is carried out on the technoware, humanware, inforware, and orgaware components using the technometric method (UNESCAP). Business performance is measured through a combination of financial and non-financial aspects deducted from financial and marketing figures. Analysis of the influence of technology components on business performance of SME's is done using the Structural Equation Model (SEM) with Partial Least Square software (PLS). Data is collected through interviews and questionnaires from 21 rattan processing SME's in South Kalimantan that produce rattan furnitures. The results show that the value of the contribution of technology (TCC) to the performance of rattan processing SME's in South Kalimantan is still quite low. Analysis of the results shows a direct influence of technoware and humanware on business performance, while orgaware influences business performance indirectly through humanware.