• Journal of The Korean Society of Clinical Toxicology
• /
• v.19 no.1
• /
• pp.1-7
• /
• 2021

Purpose: The purpose of this study was to conduct a systematic review to investigate the socio-economic benefits of the poison control center (PCC) and to assess whether telephone counseling at the poison control center affects the frequency of emergency room visits, hospitalization, and length of stay of patients with acute poisoning. Methods: The authors conducted a medical literature search of the PubMed, EMBASE, and Cochrane Library databases. Two reviewers evaluated the abstracts for eligibility, extracted the data, and assessed the study quality using a standardized tool. Key results such as the cost-benefit ratio, hospital stay days, unnecessary emergency room visits or hospitalizations, and reduced hospital charges were extracted from the studies. When meta-analysis was possible, it was performed using RevMan software (RevMan version 5.4). Results: Among 299 non-duplicated studies, 19 were relevant to the study questions. The cost-benefit ratios of PCC showed a wide range from 0.76 to 36 (average 6.8) according to the level of the medical expense of each country and whether the study included intentional poisoning. PCC reduced unnecessary visits to healthcare facilities. PCC consultation shortened the length of hospital stay by 1.82 (95% CI, 1.07-2.57) days. Conclusion: The systematic review and meta-analysis support the hypothesis that the PCC operation is cost-beneficial. However, when implementing the PCC concept in Korea in the future, it is necessary to prepare an institutional framework to ensure a costeffective model.

• Tunnel and Underground Space
• /
• v.32 no.5
• /
• pp.298-311
• /
• 2022

Some problems, such as aging workers, a decreased population due to a low birth rate, and shortage of skilled workers, are rising in construction sites. Therefore research for smart construction technology that can be improved for productivity, safety, and quality has been recently developed with government support by replacing traditional construction technology with advanced digital technology. In particular, the motor grader that mainly performs road surface flattening is a construction machine that requires the application of automation technology for repetitive construction. It is predicted that the construction period will be shortened if the construction automation technology such as trajectory tracking, automation work, and remote control technology is applied. In this study, we introduce the hardware and software architecture of the smart motor grader to apply unmanned and automation technology and then analyze the traditional earthwork method of the motor grader. We suggested the application plans for the path pattern and blade control method of the smart motor grader based on this. In addition, we verified the performance of waypoint-based path-following depending on scenarios and the blade control's performance through tests.

• Animal Bioscience
• /
• v.37 no.6
• /
• pp.1001-1006
• /
• 2024

Objective: This study aimed to investigate the effect of Codonopsis pilosula polysaccharide (CPP) on the motility, mitochondrial integrity, acrosome integrity rate, and antioxidant ability of sheep sperm after preservation at 4℃. Methods: Semen from healthy adult rams were collected and divided into four groups with separate addition of 0, 200, 400, and 1,000 mg/L CPP. Sperm motility was analyzed using the Computer-Assisted Semen Analysis software after preservation at 4℃ for 24, 72, 120, and 168 h. Sperm acrosome integrity rate was analyzed by Giemsa staining at 24, 72, and 120 h, and mitochondrial membrane integrity was analyzed by Mito-Tracker Red CMXRos. The total antioxidant capacity (T-AOC) and malondialdehyde (MDA) content of spermatozoa were measured after 120 h of preservation. Results: The sperm viability and forward-moving sperm under 200 mg/L CPP were significantly higher than that in the control group at 72 h (61.28%±3.89% vs 52.83%±0.70%, 51.53%±4.06% vs 42.84%±1.14%), and 168 h (47.21%±0.85% vs 41.43%±0.37%, 38.68%±0.87% vs 31.68%±0.89%). The percentage of fast-moving sperm (15.03%±1.10% vs 11.39%±1.03%) and slow-moving sperm (23.63%±0.76% vs 20.29%±1.11%) in the 200 mg/L group was significantly higher than control group at 168 h. The mitochondrial membrane integrity of the sperm in the group with 200 mg/L CPP was significantly higher than those in the control group after storage at 4℃ for 120 h (74.76%±2.54% vs 65.67%±4.51%, p<0.05). The acrosome integrity rate in the group with 200 mg/L (87.66%±1.26%) and 400 mg/L (84.00%±2.95%) was significantly higher than those in the control group (80.65%±0.16%) after storage for 24 h (p<0.05). CPP also increased T-AOC and decreased the MDA concentration after preservation at 4℃ (p<0.05). Conclusion: Adding CPP could improve the T-AOC of sperm, inhibit lipid peroxidation, and facilitate semen preservation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.3815-3821
• /
• 2012

The LCD frame is an important part which supports the BLU of medium/large sized TFT-LCD. To produce it efficiently, it is necessary to achieve the molding process improvement from 1 cavity to 2 cavity system. Because 2 cavity mold is compact and its hot-runner zone is broadened, it is difficult to control the temperature on the mold. In this study, injection molding analysis on the frame in 2 cavity process with FEA(Finite Element Analysis) software is carried out to estimate its quality. The calculated injection molding pressures and maximum deflection in 1 and 2 cavity processes are 41.13 MPa and 1.62 mm, 40.49 MPa and 1.66 mm respectively. The measured maximum flexure load and surface roughness of the left and right frame of 2 cavities are 209 N and 0.08 ${\mu}m$, 193 N and 0.10 ${\mu}m$ while those in 1 cavity are 140 N and 0.13 ${\mu}m$. Thermal image shows that the maximum standard deviation of the temperature on left and right side of 2 cavity mold is $1.23^{\circ}C$. The simulation and measurement results show that the quality of the frame in 2 cavity injection molding process as a whole is not worse than that of 1 cavity system. But maximum flexure loads of the frame in 2 cavity process are far greater than that in 1 cavity process.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.11
• /
• pp.1643-1650
• /
• 2017

Objective: The control of psychrotrophic bacteria causing milk spoilage and illness due to toxic compounds is an important issue in the dairy industry. In South Korea, Gangwon-do province is one of the coldest terrains in which eighty percent of the area is mountainous regions, and mainly plays an important role in the agriculture and dairy industries. The purposes of this study were to analyze the indigenous microbiota of raw milk in Gangwon-do and accurately investigate a putative microbial group causing deterioration in milk quality. Methods: We collected raw milk from the bulk tank of 18 dairy farms in the Hoengseong and Pyeongchang regions of Gangwon-do. Milk components were analyzed and the number of viable bacteria was confirmed. The V3 and V4 regions of 16S rRNA gene were amplified and sequenced on an Illumina Miseq platform. Sequences were then assigned to operational taxonomic units, followed by the selection of representative sequences using the QIIME software package. Results: The milk samples from Pyeongchang were higher in fat, protein, lactose, total solid, and solid non-fat, and bacterial cell counts were observed only for the Hoengseong samples. The phylum Proteobacteria was detected most frequently in both the Hoengseong and Pyeongchang samples, followed by the phyla Firmicutes and Actinobacteria. Notably, Corynebacterium, Pediococcus, Macrococcus, and Acinetobacter were significantly different from two regions. Conclusion: Although the predominant phylum in raw milk is same, the abundances of major genera in milk samples were different between Hoengseong and Pyeongchang. We assumed that these differences are caused by regional dissimilar farming environments such as soil, forage, and dairy farming equipment so that the quality of milk raw milk from Pyeongchang is higher than that of Hoengseong. These results could provide the crucial information for identifying the microbiota in raw milk of South Korea.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.2
• /
• pp.29-37
• /
• 2012

An experiment for an optimized automatic greenhouse environment in a flower farming greenhouse by building a ubiquitous sensor network with various sensors was conducted and the results were evaluated. And various culturing environmental information and data in the greenhouse were collected and analyzed. Then, the greenhouse was designed to maintain the best culturing environment on the basis of existing recommended optimized figures. By measuring the growth of the crops in the greenhouse, A system which controls facilities in the greenhouse to maintain the best culturing environment in accordance with change in the environment was analyzed.Computer simulation result proced that we discovered that controlling the facilities and the artificial light source increased production, enhanced quality, reduced labor and heating cost immensely. The experiment has proved that the u-flower farming system can maximize the income of farm families by sending warning messages to users of this system when weather suddenly changes so that users may cope with such changes and maintain the best culturing environment.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.24 no.3
• /
• pp.167-180
• /
• 2017

Purpose: The aim of this study was to synthesize the best available evidence for active warming interventions during cesarean section. Methods: A database search was done for randomized controlled trials utilizing active warming interventions. Maternal temperature, shivering and neonatal temperature were evaluated as outcome variables. Data were analyzed using Cochrane Review Manager software Version 5.3. Results: Thirteen studies including 1306 patients were reviewed. The degree of lowering of maternal temperature decreased in the warmed fluids (MD 0.51; p=.004) and warming mattress interventions (MD 0.22; p<.001) compared with control groups. Incidence of shivering was also lower in the active warming group (OR 0.55; p=.003). There was no statistically significant difference in maternal temperature with a forced air warming intervention (MD 0.64; p=.15) or in neonatal temperature (MD 0.12; p=.26). Conclusion: Findings show that with warmed fluids and warming mattresses applied during cesarean sections maternal temperature decline was reduced and also the incidence of shivering declined, but no significant effect was observed for forced air warming interventions. These findings provide a basis for developing a warming guideline for women having a cesarean section and will help to improve the quality of care for cesarean section patients.

• Journal of Internet Computing and Services
• /
• v.17 no.4
• /
• pp.19-26
• /
• 2016

In this paper, the dynamic buffering based smart OTT platform was proposed, and analyzed for adaptive bit-rate video delivery with the optimization of HLS (HTTP Live Streaming). This platform consists of the software platform between sever and client which detects the bandwidth capacity, and adjusts the quality of the streaming for multiple bit-rates resolutions. In order to apply adaptive buffering, two buffers are added to the basic HLS player, and each buffer is responsible for constantly buffering a previous and the next channels relative to the current channel. This adaptive transmitting with smart OTT platform is superior to delivering a static video file at a single buffering, because the video stream of adaptive double buffers can be switched streaming according to client's available network speed. As a result, this proposed smart OTT can be cooperated to the application of HLS server with segmented H.265 MPEG-2 TS video & m3u8 files with its information based on the optimized transmission channel state of live and VOD, and applied to PLC transmission, too.

• Atmosphere
• /
• v.17 no.4
• /
• pp.339-348
• /
• 2007

Global Environment Laboratory at Yonsei University in Seoul ($37.57^{\circ}N$, $126.95^{\circ}E$) has carried out the ozone layer monitoring program in the framework of the Global Ozone Observing System of the World Meteorlogical Organization (WMO/GAW/GO3OS Station No. 252) since May of 1984. The daily measurements of total ozone and the vertical distribution of ozone amount have been made with the Dobson Spectrophotometer (No.124) on the roof of the Science Building on Yonsei campus. From 2004 through 2006, major parts of the manual operations are automated in measuring total ozone amount and vertical ozone profile through Umkehr method, and calibrating instrument by standard lamp tests with new hardware and software including step motor, rotary encoder, controller, and visual display. This system takes full advantage of Windows interface and information technology to realize adaptability to the latest Windows PC and flexible data processing system. This automatic system also utilizes card slot of desktop personal computer to control various types of boards in the driving unit for operating Dobson spectrophotometer and testing devices. Thus, by automating most of the manual work both in instrument operation and in data processing, subjective human errors and individual differences are eliminated. It is therefore found that the ozone data quality has been distinctly upgraded after automation of the Dobson instrument.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.19-24
• /
• 2018

The IP Multimedia Subsystem(IMS) is an architectural framework for delivering IP multimedia services to mobile users. In order to guarantee the reliability and Quality of Service(QoS) of a variety of multimedia services, we need a new evolutionary approach that maintains the IMS based signaling platform which can perform the processing of flow through distributed controllers. Software Defined Network(SDN) is an architecture purporting to be distributed, dynamic, cost-effectives as well as adapting and seeking to be suitable for the high-bandwidth, dynamic nature of today's applications. It requires some methods for the control plane to communication with the data plane. One of such mechanisms is OpenFlow which is a prominent standard protocol and interface that is responsible for managing the network resources by using the remote SDN controller. In this paper, we propose a straightforward approach for integrating SDN technology together with the IMS architecture. Therefore we propose and construct a combined architecture model that performs flow processing using OpenFlow via the IMS based signaling platform, which maintains the existing telecom call service. Additionally, we describe some relevant experimentation results from the proposed architecture.