• 화약ㆍ발파
• /
• 제27권1호
• /
• pp.21-31
• /
• 2009

터널의 굴착이나 응력 재분포에 의해 터널 주변에는 암반 손상대(EDZ) 구간이 발생하게 되며, 이는 암반의 역학적 수리적 물성변화를 초래하여 추가적인 균열발생 및 지하수의 주요 공급로 역할을 하게 된다. 본 연구에서는 방사성폐기물 처분연구시설(KURT)을 대상으로 현장실험을 통해 암반변형계수를 측정하였고, 이를 바탕으로 손상대 영역을 세분화하여 FLAC2D를 이용한 전산해석을 실시하였다. 실험결과 KURT 주변에는 측정지점에 따라 0.6~1.8m의 손상영역이 발생하였으며, 손상대 구간의 변형계수 값은 주변 암반 변형계수의 약 40%에 해당하였다. 암반손상대로 인해 KURT 내 터널변위는 약 65%의 추가변위가 발생하였고, 최대 주응력은 58% 감소되었음을 확인하였다. 또한 손상대 영역의 고려로 인해 터널의 좌 우측 하단부에 발생되었던 소성 영역이 터널의 천정 및 바닥부근으로 확대되는 경향을 보였다.

• 자동차안전학회지
• /
• 제5권1호
• /
• pp.44-49
• /
• 2013

This paper presents a lateral collision risk index between an ego vehicle and a rear-side vehicle. The lateral collision risk is designed to represent a lateral collision risk and provide the appropriate threshold value of activation of the lateral collision management system such as the Blind Spot Detection(BSD). The lateral collision risk index is designed using the Time to Line Crossing(TLC) and the longitudinal collision index at the predicted TLC. TLC and the longitudinal collision index are calculated with the signals from the exterior sensor such as the radar equipped on the rear-side of a vehicle and a vision sensor which detects the distance and time to the lane departure. For the robust situation assessment, the perception of driving environment determining whether the road is straighten or curved should be determined. The relative motion estimation method has been proposed with the road information via the integrated estimator using the environment sensors and vehicle sensor. A lateral collision risk index was composed with the estimated relative motion considering the relative yaw angle. The performance of the proposed lateral collision risk index is investigated via computer simulations conducted using the vehicle dynamics software CARSIM and Matlab/Simulink.

• 한국철도학회논문집
• /
• 제10권5호
• /
• pp.596-599
• /
• 2007

전동차 내장패널에 대한 비교전과정평가를 실시하였다. ISO14044 표준과 에코인디케이터 99 방법론, SimaPro 7.0 software, Ecoinvent DB를 이용하여 전과정목록 DB를 구축하고 LCA를 수행하였다. 전동차 내장패널의 환경성 측면에 대한 일반적인 예상에 대하여 LCA를 통한 검증을 수행하였다. 전동차 내장패널의 중량이 환경성과 상관이 있음에도 불구하고 상대적 중요도는 높지 않았으며, Al 내장패널의 경우 사용단계의 환경영향이 가장 큼에도 불구하고 타 재질 내장패널에 비해 제작단계의 환경영향이 주요환경이슈로 도출되었다. Al 내장패널의 경우, 재활용으로 인한 환경편익이 크나, 장기적으로는 제작단계의 환경영향을 저감하여야 타 재질 대비 환경성 측면의 경쟁력을 강화할 수 있다.

• 전자공학회논문지CI
• /
• 제48권4호
• /
• pp.9-20
• /
• 2011

미래 전쟁의 양상은 네트워크 중심전(network-centric warfare) 및 효과중심 작전(effects-based operations)으로 변화하고 있다. 전장에서 적을 먼저 발견하고 타격하기 위해서는 실시간 표적획득 및 첩보수집, 정확한 상황판단과 적시적인 지휘결심이 필요하다. 첨단 센서기술과 무선네트워크의 급속한 발전으로 인하여 전장감시의 운영개념에도 큰 변화가 요구된다. 특히, 자동화된 정보수집 자산이 부족한 지상군에게 있어서 전장감시 센서네트워크시스템의 도입은 필수 과제이다. 따라서 이 논문에서는 지상군 작전에서 적의 조기 발견과 전장가시화에 필요한 전장감시 센서네트워크시스템 구축을 위한 온톨로지 기반 상황인식 프레임워크를 제안한다. 제안한 온톨로지 기반 상황인식 프레임워크의 성능을 상황정보시스템의 평가방법을 적용하여 기존 시스템과 비교 분석한 결과 양호하게 평가되었으며, 장비협업도를 활용한 구조적 평가방법으로도 만족한 결과를 입증하였다. 온톨로지 기반 상황인식 프레임워크는 확장성과 재사용성의 측면에서 매우 장점이 많은 방식으로서, 향후 지상군 감시정찰체계에 폭 넓게 확대 적용할 수 있다. 또한, 온톨로지로 인한 데이터 량의 증가, 집중화로 인한 네트워크 대역폭 제한 및 처리시간 증가 문제들은 제대별 임무와 특성에 맞게 커스터마이징하거나, 차세대 통신 인프라의 구축으로 인하여 지능형 감시정찰 서비스를 촉진시키게 되므로 지상군의 정보능력 확충에 크게 기여할 것으로 기대된다.

• 대한인간공학회지
• /
• 제24권3호
• /
• pp.43-52
• /
• 2005

A two-dimensional posture measurement system was developed to evaluate the risks of work-related musculoskeletal disorders(MSDs) easily on various conditions of work. The posture measurement system is an essential tool to analyze the workload for preventing work-related musculoskeletal disorders. Although several posture measurement systems have been developed for workload assessment, some restrictions in industry still exist because of its difficulty on measuring work postures. In this study, an image recognition algorithm was developed based on a neural network method to measure work posture. Each joint angle of human body was automatically measured from the recognized images through the algorithm, and the measurement system makes it possible to evaluate the risks of work-related musculoskeletal disorders easily on various working conditions. The validation test on upper body postures was carried out to examine the accuracy of the measured joint angle data from the system, and the results showed good measuring performance for each joint angle. The differences between the joint angles measured directly and the angles measured by posture measurement software were not statistically significant. It is expected that the result help to properly estimate physical workload and can be used as a postural analysis system to evaluate the risk of work-related musculoskeletal disorders in industry.

• Journal of Positioning, Navigation, and Timing
• /
• 제5권4호
• /
• pp.221-233
• /
• 2016

This paper deals with performance assessment of the kinematic network-based GPS positioning technique with a view to using it for ellipsoidally referenced bathymetric surveys. To this end, two field trials were carried out on a land vehicle and a surveying vessel. Single-frequency GPS data acquired from these tests were processed by an in-house software which equips the network modeling algorithm with instantaneous ambiguity resolution procedure. The results reveals that ambiguity success rate based on the network model is mostly higher than 99.0%, which is superior to that of the single-baseline model. In addition, achievable accuracy of the technique was accessed at ${\pm}1.6cm$ and 2.7 cm with 95% confidence level in horizontal and vertical component respectively. From bathymetric survey at the West Nakdong River in Busan, Korea, 3-D coordinates of 2,011 points on its bed were computed by using GPS-derived coordinates, attitude, measured depth and geoid undulation. Note that their vertical coordinates are aligned to the geoid, the so-called orthometric height which is widely adopted in river engineering. Bathymetry was constructed by interpolating the coordinate set, and some discussion on its benefit was given at the end.

• 전기학회논문지
• /
• 제59권1호
• /
• pp.192-196
• /
• 2010

Due to a development of a modem technology as Power Line Communication(PLC) over 200 Mbps, the high-speed multi-media data trasmission could be currently possible. The strength of the PLC has no more additional wiring work. PLC has also possible to high quality data transmission with currently electrical cable. It has a various strong point campare with existing wire and wireless communication technologies. In This paper we develop a high quality media transmitter-receiver based on merging the HomePlug AV, which is 200 Mbps class PLC technology and HDMI Interface technology. The video function was used for the VEDEO TEST GENERATOR in order to a property valuation. Smart Live 6 software were used for the assessment of audio property. As the result of measurement of the HD class images by capturing from the receiver of the PLC, the quality of images couldn't be confirm any deterioration, which has compared with original reflections. In case of audio part as the result of confirmation of the Phase, Magnitude, it has been confirmed that over 90% of nomal transmition and receiving of acoustic signal. It can be possible to have HD class Media service through the PLC.

• 한국정밀공학회지
• /
• 제20권11호
• /
• pp.134-141
• /
• 2003

An industrial product is designed and fabricated, followed by the inspection process in order to check whether it is dimensionally tolerable or not. The machining process produces a part such as a mold or die, in which the three-dimensional coordinate might be measured by a CMM (Coordinate Measuring Machine) for assessment of its dimension. It is not ignorable, however, that a CMM measurement requires a lot of operating time and cost, which has led to many studies on the OMM system. The OMM system can be categorized into contact and non-contact types, and each of which has its own strengths and weaknesses. Non-contacting types generally utilize structured lights, sounds or magnetic fields. Though they show rather poor performance in positional accuracy, the measuring speed is faster than the contacting probes. This paper presents the development of an OMM system based on a non-contacting laser displacement sensing apparatus and CAD model. The system is composed of software modules of center-aligning and measuring, which has been operated and verified on a NC machining center on a shop floor.

• 한국압력기기공학회 논문집
• /
• 제9권1호
• /
• pp.40-47
• /
• 2013

The capacity factor of nuclear power plant in Korea is the highest level in the world. However, the integrity assessment of nuclear power plant is depended on foreign country. Especially, most eddy current testing systems for inspecting steam generators in nuclear power plant are currently imported from USA, Canada, and so on. Therefore, the eddy current testing system can react more active and adaptive from economic and managerial standpoint for actual nuclear power plants in Korea is required. In this paper, an eddy current testing system for inspecting steam generators in nuclear power plants is introduced. Frequency generator, analog circuit, analog digital converter circuit, and digital control circuit are composed in eddy current testing system. A benchmarking of acquisition system and acquisition software, eddynet 11i made by Zetec, and modifications are carried out based on the test environment of Korea nuclear power plants. Finally, all eddy current apparatus are integrated to inspect steam generator tubes in nuclear power plants.

• 한국전문물리치료학회지
• /
• 제21권2호
• /
• pp.74-81
• /
• 2014

The versions of the Oswestry disability questionnaire (ODQ) is regarded as one of the most extensively used condition-specific instruments measuring disability resulting from low back pain. It has been shown to have adequate psychometrics, reliability, validity, and responsiveness as a whole, yet the summated total score of the instrument often provide little information to rehabilitation clinicians. A keyform analysis based on Rasch measurement model is an innovative way of illustrating the specific test items that an individual may or may not perform. By applying the keyform of the Rasch measurement model to the ODQ, rehabilitation clinicians may able to select more challenging ODQ items matching an individual's ability and document them as attainable treatment goals. The results demonstrated how a keyform analysis assist to setting possible goals for the treatment of individuals with low back pain. Forty-two individuals with low back pain were recruited from rehabilitation clinics in Gainesville, Florida. A series of Rasch analyses on the 10 items of the ODQ were performed using Winsteps software. The performance of two individuals on those 10 items was illustrated on the keyform. The keyform analysis of the Rasch measurement model may be translated into a useful tool for making clinical judgements.