• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.4
• /
• pp.49-55
• /
• 2016

Nowadays there are magnetic sensors in a wide variety of equipment such as computers, cars, airplanes, medical and industrial instruments. In many of these applications the magnetic sensors offer safe and non-invasive means of detection and are more reliable than other technologies. The electric current in a conductor generates a magnetic field detected by this type of sensor. This work aims to define a package dedicated to an electrical current sensor using a MTJ (Magnetic Tunnel Junction) as a sensing device. Four different proposals of packaging, three variations of the chip on board (CoB) package type and one variation of the thin small outline package (TSOP) were analyzed by COMSOL modeling software by simulating a brad range of current injection. The results obtained from the thermal and magnetic analysis has proven to be very important for package improvements, specially for heat dissipation performance.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.74.1-74.1
• /
• 2016

미국 텍사스 주 맥도날드 천문대에 위치한 2.1m 망원경에 부착된 SQUEAN (SED Camera for QUasars in EArly uNiverse)은 2010년부터 운용되고 있는 CQUEAN을 바탕으로 개발된 적외선 영역 광학기기이다. 20개의 필터 장착이 가능한 필터 휠 제어 시스템을 가지고 있는 SQUEAN 시스템은 SMOP (SQUEAN Main Observation software package), KFC82 (KHU Filter wheel Control software package for McDonald 82 inch Telescope), KAP82 (KHU Auto-guiding software Package for McDonald 82 inch Telescope) 등으로 구성되어 있다. 그러나 대형 필터 휠을 제어하는 모터의 토크부족과 감속기의 백래시(Backlash)의 영향으로 오프셋의 오차가 커서 초기위치의 재설정 없이 하룻밤 이상 관측을 지속하는데 어려움이 있었다. 토크가 크고 인코더가 장착된 모터 교체와 제어 프로그램 등을 변경하고, 백래시의 영향을 최소화할 수 있도록 소프트웨어로 보정하였다. 또한, SMOP로부터 네트워크 통신을 통해 초기화용 필터 마스크(Initial Filter Mask:IFM)를 제작하여 돔 플랫 이미지에서 정확한 필터의 위치를 측정하는 기능을 도입하였다. 이 발표에서는, 개선된 하드웨어 및 소프트웨어의 내용과 테스트한 결과에 대해 보여준다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.6
• /
• pp.1-7
• /
• 2004

It is necessary for starting voltage to him on high pressure discharge lamp. This starting voltage supply to high pressure sodium vapor lamp as electric discharge lamp, Electric field is producted in Electric discharge tube, So accelerative electron collide against vapour atom and second electron is generated, And rapidly the current flow to Electric discharge tube. This paper showed that the life cycle and exchanges time for all electric discharge lamp was different according to each manufactures, This paper is proposed the evaluating algorithm of exchanges time for high pressure sodium vapor lamp, used LabVIEW software package.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.2
• /
• pp.123-132
• /
• 2003

The quality certification test is usually conducted by a certifying organization to determine and guarantee the quality of software after the software development phase, commonly without the actual source code, but with by going against the product's manual. In this paper, we implement a Manual-based Automatic Test data generating tool: MaT, the test technique based on manual, that automatizes producing the test data from analysis data of software package and manual. The input data of MaT are the result of the analysis of software and manual. We propose 'menu-based test analysis model' in order to generate the input data. We believe that the proposed technique and tool he]p improving quality and reliability of the software.

• Journal of Information Technology Applications and Management
• /
• v.21 no.4_spc
• /
• pp.381-401
• /
• 2014

This study proposes the accurate economic effect (employment inducement coefficient, hiring inducement coefficient, index of the sensitivity of dispersion, index of the power of dispersion, and ratio of value added) of Korea software industry by analyzing the inter-industry relation using the modified inter-industry table. Some previous studies related to the inter-industry analysis were reviewed and the key problems were identified. First, in the current inter-industry table publishedby the Bank of Korea, the output of software industry includes not only the output of pure software industry (package software and IT services) but also the output of non-software industry due to the misclassification of the industry. This causes the output to become bigger than the actual output of the software industry. Second, during rewriting the inter-industry table, the output is changing. The inter-industry table is the table in the form of rows and columns, which records the transactions of goods and services among industries which are required to continue the activities of each industry. Accordingly, if only an output of a specific industry is changed, the reliability of the table would be degraded because the table is prepared based on the relations with other industries. This possibly causes the economic effect coefficient to degrade reliability, over or under estimated. This study tries to correct these problems to get the more accurate economic effect of the software industry. First, to get the output of the pure software section only, the data from the Korea Electronics Association(KEA) was used in the inter-industry table. Second, to prevent the difference in the outputs during rewriting the inter-industry table, the difference between the output in the current inter-industry table and the output from KEA data was identified and then it was defined as the non-software section output for the analysis. The following results were obtained: The pure software section's economic effect coefficient was lower than the coefficient of non-software section. It comes from differenceof data to Bank of Korea and KEA. This study hasa signification from accurate economic effect of Korea software industry.

• Journal of the Society of Disaster Information
• /
• v.10 no.1
• /
• pp.98-104
• /
• 2014

A new prototype software package has been developed by integrating two existing programs designed to predict and maneuver chemical and nuclear disasters in order to set up a response system for dealing with the combined two disasters. The protype is designed to be mainly used by civil defence officers, together with an identification of 625 scenarios of chemical and nuclear disasters. The package is expected to contribute to upgrade a more systematic regional public protection plan for chemical and nuclear disasters. In addition, it enables all relevant local divisions to share disaster information in real time, resulting in a minimization of possible fatal damages.

• Journal of Digital Convergence
• /
• v.10 no.6
• /
• pp.61-69
• /
• 2012

The SW market has greatly growing up according as rapid progressing of the smart fusion, nowadays. But, the portion of Korea in the global SW market is no more than 2.2%. Especially, the portion of Korea's package SW is very much fragile than it of the global companies and lower than it of embedded SW in Korea. It is caused by weak competitiveness of Korea's package SW and the politic support of government is fainter than it of other SW kinds. So, this article will grasp the actual state of domestic package SW industry through data and case study, drew the improving problems of the package SW policy, and propose the cultivating policies of the package SW.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.1 s.45
• /
• pp.243-252
• /
• 2007

In recent years, there has been a growing concern about enterprise resource planning (ERP) implementation in small and medium-sized enterprises (SMEs). In this study, we investigate the relationship among ERP software qualify, vendor support, user information satisfaction. and performance of ERP implementation. The empirical findings of this paper will allow SMEs to identify the importance of relationships with vendors and software itself for the successful implementation of ERP systems. The results provide a useful basis for the SMEs which have limited information capability to focus their attention on the software quality and vendor support in overcoming difficulties and obstacles facing the ERP implementation.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.2
• /
• pp.111-120
• /
• 2004

This paper presents an application of Unified Modeling Language(UML) software technique for developing transmission pricing evaluation package. Also, this paper describes a transmission pricing algorithm applicable to a large-scale power system. The usage-based transmission pricing mechanism is very complex since it requires power flow analysis, fault current analysis, sensitivity evaluation of a transmission line, penalty factors calculation, transmission asset databases, and cost allocation rules, etc. For the efficient and flexible development of the transmission pricing package, a UML. approach is applied, which is composed of a use-case diagram, interaction diagram, class diagram, and package diagram using Rational Rose Unified Process(RUP). The designed transmission pricing package can be efficiently modified and reused as the market environments evolves since it is designed by Object-Oriented Programming(OOP).

• The Korean Journal of Applied Statistics
• /
• v.33 no.1
• /
• pp.87-105
• /
• 2020

Statistical engineering contains the design of experiments, quality control/management, and reliability engineering. R is a free software environment for statistical computing and graphics that is supported by the R Foundation for Statistical Computing. R package has many functions and libraries for statistical engineering. We can use R package as a useful tool for statistical engineering. This paper shows the applications of R package for statistical engineering and suggests a R Task View for statistical engineering.