• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2005년도 동계학술연구발표회 및 2차 아시안포럼
• /
• pp.74-75
• /
• 2005

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2000년도 International Symposium on Magnetics The 2000 Fall Conference
• /
• pp.482-483
• /
• 2000

• 한국자기공명학회:학술대회논문집
• /
• 한국자기공명학회 2002년도 International Symposium on Magnetic Resonance
• /
• pp.61-61
• /
• 2002

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1989년도 춘계학술대회 논문집
• /
• pp.49-51
• /
• 1989

The effect of Mo elenent and annealing condition on the magnetic properties were investigated in Fe$_{80}$B$_{12}$Si$_{8}$ amorphous alloy. With increasing Mo contents, soft magnetic properties were improved by decreasing coercive force and increasing maximum permeability. These improvements were attributed to the decreasing of magnetostriction by Mo addition. The annealing treatment also improved the soft magnetic properties of (Fe$_{1-x}$ Mo$_{x}$)$_{80}$ B$_{12}$ Si$_{8}$ amorphous alloys. It could be thought that these improvements were ascribed to the relaxation of internal stress.nal stress.ess.

• 한국전기전자재료학회논문지
• /
• 제19권9호
• /
• pp.883-887
• /
• 2006

In order to attain high-rate deposition of Mn-Zn ferrite thin film for soft magnetic underlayer in perpendicular magnetic recording media, a reactive sputtering using powder-metal targets under the mixture gas of Ar and $O_{2}$ was performed. It was succeeded that Mn-Zn ferrite films with (111) crystal orientation were deposited on Pt(111) underlayer without any annealing process. The film revealed 3.4 kG of 4 ${\pi}Ms$, 70 Oe of coercivity. The deposition rate of the new method was 16 times as high as that of the conventional method using ferrite target.

• 한국자기학회지
• /
• 제1권2호
• /
• pp.31-36
• /
• 1991

스퍼터링에 의해 형성된 비정질 Co/sub 87/Zr/sub 4/Nb/sub 9/ 박막을 TEM과 EDS로 분석하여 박막의 구조적 그리고 저성적 불균일성을 관찰하였다. 특히 기판 bias를 가한 상태에서 제조된 박막을 회전 자장 열처리했을 때는 Co-rich 지역과 (Zrnb) oxied-rich 지역의 조대한 조직으로 분리되었으며, 이러한 박 막의 자기적 특성은 'ultra-soft'한 성질을 나타내었다. Ulta-soft함 박막은 H/sub c/=0.18 Oe, H/sub k/ = 0.55 Oe, M/sub r//M/sub s/=0.75의 자기적 특성과 overdamping된 고주파특성, 그리고 외부자계에 대한 자화율 변화곡선이 가역적이고 연속적이라는 특이한 현상을 보인다. 조성적으로 불균일한 박막의 ultra-soft 한 특성은 Co-rich 입자들이 exchange coupling energy와 magnetostatic coupling energy를 최소화 하기 위해 만드는 vortex형의 자화분포로써 설명되었다. 즉 vortex 는 여러개의 co-rich 입자들로 형성 되어있는 것으로 추정되며, 수평, 수직방향으로의 반자장 계수(demagnetizing factor)가 각각 flux closure 와 flux reversal에 의해 무시되기 때문에 vortex로 부터 CoZrNb 박막의 ultra-soft 특성을 설명할 수 있었다.

• 한국자기학회지
• /
• 제16권4호
• /
• pp.197-200
• /
• 2006

RF magnetron reactive sputtering법으로 CoFeHfO 박막을 상온에서 제작하여 산소분압에 따른 포화자화, 보자력, 이방성자계를 조사하였다. 최적조건인 산소분압 8%에서 제조한 $Co_{39}Fe_{34}Hf_{9.5}O_{17.5}$ 박막은 포자자속밀도($4{\pi}M_s$) 19kG, 보자력($H_c$) 0.37Oe, 이방성자계($H_k$) 48.62Oe의 우수한 연자성을 나타내었다. CoFeHfO 박막의 전기비저항은 산소분압이 늘어남에 따라 증가하는 경향을 나타내었으며 우수한 연자기적 성질을 가지는 $Co_{39}Fe_{34}Hf_{9.5}O_{17.5}$ 박막의 경우, 300 ${\mu}{\Omega}cm$의 높은 전기비저항과 48.62 Oe의 높은 이방성자계 때문에 $Co_{39}Fe_{34}Hf_{9.5}O_{17.5}$박막이 고주파에서 우수한 연자기 특성을 가지는 것으로 사료된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.478-480
• /
• 2001

Fe-base amorphous films exhibit large saturation magnetostriction and soft magnetic Properties, which make them suitable for strain sensor applications. Most important material properties for the performance of these elements are the superior soft magnetic properties, such as high permeability and small coercive force, as well as magnetoelastic properties. It is well known that the strain generated in film deposition and/or post-heat treatment processes is one of important material properties, which effects on the soft magnetic properties of the film via magnetoelastic coupling. In this study, the effect of an isotropic strain in plane of magnetic films have been performed experimently. Amorphous films with the composition of (F $e_{90}$ $Co_{10}$)$_{78}$S $i_{l2}$ $B_{10}$ were employed in this study. The film with 5${\mu}{\textrm}{m}$ thick was deposed onto the polyimide substrate with 50${\mu}{\textrm}{m}$ thick by virtue of RF sputtering. The film was subject to post annealing with a static magnetic field with 500Oe magnetic field intensity at 35$0^{\circ}C$ for 1 hour. The polyimide substrate with the film was bonded with an adhesive on PZT piezoelectric substrate with 600${\mu}{\textrm}{m}$ thick in applying voltage of 500V. The change in MH loops of films due to the isotropic strain was measured by using VSM. The coercive force was evaluated from MH loops. It has shown in the results that M-H loops of films are subject to change considerably with a dc voltage, resulting of the magnetization rotation from normal to plane direction as the applied voltage is changed from 500V to 250V.50V.V.

• 한국전기전자재료학회논문지
• /
• 제30권12호
• /
• pp.782-787
• /
• 2017

There is growing interest in power inductors in which metal soft magnetic powder and epoxy resin are combined. In this field, the process technology for increasing the packing density of magnetic particles in an injection molding process is very important. However, little research has been reported in this regard. In order to improve the packing density, we investigated and compared the sedimentation heights of pastes for three types of soft magnetic alloy powders as a function of the mixing ratios and the type of resin used. Experimental results showed that the packing density was the highest (71.74%) when the mixing ratio was 80 : 16 : 4 (Sendust : Fe-S : CIP) according to the particle size using an SE-4125 resin. In addition, the packing density was found to be inversely related to the layer separation distance. As a result, it was confirmed that the dispersion of solid particles in the paste was important for curing; however, the duration of the curing process can greatly affect the packing density of the final composite.

• 한국분말재료학회지
• /
• 제29권6호
• /
• pp.459-467
• /
• 2022

Soft magnetic powder materials are used throughout industries such as motors and power converters. When manufacturing Fe-based soft magnetic composites, the size and shape of the soft magnetic powder and the microstructure in the powder are closely related to the magnetic properties. In this study, Fe-Si-Al-P alloy powders were manufactured using various manufacturing process parameter sets, and the process parameters of the vacuum induction melt gas atomization process were set as melt temperature, atomization gas pressure, and gas flow rate. Process variable data that records are converted into 6 types of data for each powder recovery section. Process variable data that recorded minute changes were converted into 6 types of data and used as input variables. As output variables, a total of 6 types were designated by measuring the particle size, flowability, apparent density, and sphericity of the manufactured powders according to the process variable conditions. The sensitivity of the input and output variables was analyzed through the Pearson correlation coefficient, and a total of 6 powder characteristics were analyzed by artificial neural network model. The prediction results were compared with the results through linear regression analysis and response surface methodology, respectively.