• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.5
• /
• pp.997-1002
• /
• 1999

The aim of the present study was to investigate effects of food preservative addition and changes in composition of herb extract product on the growth of spoilage yeast, Zygosaccharomyces sp. Herbs such as Panax ginseng, Cinnamomum cassia, Lycium chinense, Zyzyphus juiuba and Jingiber officinale were altogether put into water and essence was extracted at 80oC, and then the extract was concentrated at 75oC. The herb extract product was made by adding vitamins, amino acids and honey to the concentrated herb extract. The amount of gas produced from the herb extract product was increased as inoculated cell number increased but decreased as Brix concentration increased. Gases were produced in small amount when incubation was made at 4oC but large amounts of gases were produced at 25 or 40oC of incubation. The gas production and growth of Zygosaccharomyces sp. were measured after browning reaction was induced by heating at 85oC for 12 hours. It appeared that heating treatment did not induce any significant change in the gas production and growth of the cell. The effects of addition of various sugar to the herb extract produce were also invesigated. Amounts of gas production were in the order of glucose>sucrose>oligosaccharide>stevioside. The viable cell count was measured as 6.0$\times$107 CFU/g when glucose was added to the herb extract product. The viable cell counts were 5.0$\times$106, 3.0$\times$103, and 3.0$\times$102 CFU/g in sucrose, oligosaccharide and stevioside added herb extract product, respectively. The amount of gas production from the herb extract product was remarkably reduced by addition of such food preservatives as sodium benzoate and DF 100. TLC(thin layer chromatography) chromatogram of the herb extract showed stability of the herb extract in the above treatments.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.2
• /
• pp.137-145
• /
• 2000

Carcinogenesis is a multi-stage process that generally consists of at least three steps; initiation, promotion, and progression. If one of these carcinogenic steps were suppressed or delayed, the cancer could be prevented. Cancer chemoprevention is defined to be inhibition or reversal of the carcinogenic process by the specific chemical agents and is a novel approach to cancer management alternative to conventional chemotherapy. Chlorophylln(CHL), a water-soluble derivative of chlorophyll, containing sodium and copper, has been known to be strong antimutagen in several test systems, but its mechanism of antimutagenic action is unknown. In the present experiment, the possibility of CHL as chemopreventive drugs on 7,12-dimethylbenz[a]anthracene(DMBA)-induced hamster buccal pouch carcinogenesis was investigated by mutagenicity test, carcinogenicity test, and frequency or spectrum of H-ras mutations in the both of DMBA-induced and chlorophylln-pretreated-DMBA induced tumor by polymerase chain reaction and non-isotopic restriction fragment length polymorphism. The treatment of CHL reduced the yields and multiplicity of the 0.5% DMBA-induced tumor, 86% to 62.5% and $3.7{\pm}0.6$ to $1.4{\pm}0.3$, respectively. The occurrence of histidine revertant by $20{\mu}mole$ DMBA was inhibited 25.6 to 81.7% by 1 to $5{\mu}M$ CHL in a dose-dependent manner. The mutation rates of H-ras gene in DMBA-induced and CHL-pretreated-DMBA induced tumor were 96%, 94% of which the most mutations were in codon 12/13. These results suggest that CHL inhibits the carcinogenic action of DMBA by the formation of complex between CHL and DMBA or the inhibition of the activation of DMBA in vivo. But CHL did not affect the mutation rates or its spectrum in already formed tumor.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.8
• /
• pp.1286-1296
• /
• 2007

Hanji, the korean traditional papers were mostly made from mulberry paper. But the production and demand of hanji have decreased rapidly because mulberry paper yields were insufficient and handworked hanji procedures were complicated. Recently, the researches on hanji were carried out to improve the properties of hanji. Kenaf fibers have been interested as a substitute resource of mulberry paper for hanji production. In this research, Kenai pulps were manufactured with removal methods of lignin or hemicellulose from kenaf fibers and paper mulberry pulps with traditional alkali methods. Kenaf papers, paper mulberry, and kenaf/paper mulberry mixed papers were manufactured with their pulps. The crystallinity, fiber length, color of the pulps and tensile strength, tear strength, water absorption of the papers were investigated. The results were as follow: The removal rates of lignin of chemical retted kenaf fibers with sodium chlorite reaction for 40 minutes were 70% and were higher than 40% of double retted fibers. Paper mulberry pulps has less lignin and hemicellulose than kenaf differently. The crystallinity of paper mulberry pulps were very low with 60%, but kenaf pulps were 90%. The chemical retted CR-40-1 pulps were similar with paper mulberry pulps on fiber length & fibrilation of fibers. Tensile strength of paper mulberry were higher than kenaf papers because of fibrilation of paper mulberry, but tear strength were lower. Tensile strength and tear strength were improved on kenaf/paper mulberry 30/70 mixed papers.

• Applied Chemistry for Engineering
• /
• v.1 no.1
• /
• pp.91-99
• /
• 1990

For-${\alpha}$-APM was efficiently prepared by the reaction of For-Asp anhydride and Phe-OMe in methylethylketone, $CH_3CN$, and in water. The selective recovery of For-${\alpha}$-APM from the resulting For-${\alpha}$-APM and For-${\beta}$-APM mixture was possible via repetitive extraction at constant pH of 4.00. The oxidative deformylation was successfully performed by using several oxidants including $H_2_O2$/THF, sodium percarbonate, and $H_2_O2$/HCl/MeOH giving APM in high yields. The efficiency of the oxidative deformylation was raised in acidic condition for all the deformylation reactions.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.5
• /
• pp.579-584
• /
• 2011

Sulfonated poly (ether sulfone)s containing BFBN were prepared from 2,3-bis(4-fluorophenyl)-2-butenedinitrile , 4,4-sulfonyldiphenol and sulfonated 4,4'-difluorodiphenylsulfone sodium salt using potassium carbonate, and followed acidification reaction with 1M $H_2SO_4$. BFBN was prepared from 4-fluorobenzylcyanide, $CCl_4$, NaOH using trimethylbenzylammoniumchloride . Sulfonated poly(ether sulfone)s containing BFBN were studied by FT-IR, $^1H$-NMR spectroscopy, and thermo gravimetric analysis (TGA). The water uptake of synthesized S-PBFBN membranes exhibit 31~62% compared with 28% of Nafion 211. The S-PBFBN membranes exhibit proton conductivities ($80^{\circ}C$, RH 100) of 53.8~117.4 mS/cm compared with 137.4 mS/cm of Nafion 211.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.5
• /
• pp.25-34
• /
• 2012

It has been well known that concrete structures exposed to acid and sulfate environments such as sewer etc. show significant decrease in their durability due to chemical attack. Such deleterious acid and sulfate attacks lead to expansion and cracking in concrete, and thus, eventually result in damage to cement mortar by forming expansive hydration products due to the reaction between cement hydration products and acid and sulfate ions. In this study, the effect of fly ash and blast furnace slag on the bond performances of structural synthetic fiber in latex modified cement mortar under sulfate environments. Fly ash and blast furnace slag contents ranging from 0 % to 20 % are used in the mix proportions. The latex modified cement mortar specimens were immersed in fresh water, 8 % sodium sulfate ($Na_2SO_4$) solutions for 28 and 50 days, respectively. Pullout tests are conducted to measure the bond performance of structural synthetic fiber from latex modified cement mortar after sulfate environments exposure. Test results are found that the incorporation of fly ash and blast furnace slag can effectively enhance the PVA fiber-latex modified cement mortar interfacial bond properties (bond behavior, bond strength and interface toughness) after sulfate environments exposure. The microstructural observation confirms the findings on the interface bond mechanism drawn from the fiber pullout test results under sulfate environments.

• Nutrition Research and Practice
• /
• v.15 no.2
• /
• pp.160-172
• /
• 2021

BACKGROUND/OBJECTIVES: Nutritional status and food intake during pregnancy and lactation can affect fetal programming. In the current metabolic syndrome epidemic, high-fructose diets have been strongly implicated. This study investigated the effect of maternal high-fructose intake during pregnancy and lactation on the development of metabolic syndrome in adult offspring. SUBJECTS/METHODS: Drinking water with or without 20% fructose was administered to female C57BL/6J mice over the course of their pregnancy and lactation periods. After weaning, pups ate regular chow. Accu-Chek Performa was used to measure glucose levels, and a tail-cuff method was used to examine systolic blood pressure. Animals were sacrificed at 7 months, their livers were excised, and sections were stained with Oil Red O and hematoxylin and eosin (H&E) staining. Kidneys were collected for gene expression analysis using quantitative real-time Polymerase chain reaction. RESULTS: Adult offspring exposed to maternal high-fructose intake during pregnancy and lactation presented with heavier body weights, fattier livers, and broader areas under the curve in glucose tolerance test values than control offspring. Serum levels of alanine aminotransferase, aspartate aminotransferase, glucose, triglycerides, and total cholesterol and systolic blood pressure in the maternal high-fructose group were higher than that in controls. However, there were no significant differences in mRNA expressions of renin-angiotensin-aldosterone system genes and sodium transporter genes. CONCLUSIONS: These results suggest that maternal high-fructose intake during pregnancy and lactation induces metabolic syndrome with hyperglycemia, hypertension, and dyslipidemia in adult offspring.

• Korean Chemical Engineering Research
• /
• v.54 no.1
• /
• pp.11-15
• /
• 2016

Proton Exchange Membrane Fuel Cells (PEMFC) instead of batteries is appropriate for long time flight of unmanned aero vehicles (UAV). In this work, $NaBH_4$ hydrolysis system supplying hydrogen to PEMFC was studied. In order to decrease weight of $NaBH_4$ hydrolysis system, enhancement of hydrogen yield, recovery of condensing water and maintenance of stable hydrogen yield were studied. The hydrogen yield of 3.4% was increased by controlling of hydrogen pressure in hydrolysis reactor. Condensing water formed during air cooling of hydrogen was recovered into storage tank of $NaBH_4$ solution. In this process the condensing water dissolved $NaBH_4$ powder and then addition of $NaBH_4$ solution decreased system weight of 14%. $NaBH_4$ hydrolysis system was stably operated with hydrogen yield of 96% by 2.0g Co-P-B catalyst for 10 hours at 2.0L/min hydrogen evolution rate.

• Korean Chemical Engineering Research
• /
• v.47 no.4
• /
• pp.424-429
• /
• 2009

The effects of $Na_2O$, $SiO_2$ and $H_2O$ contents of the synthetic mixtures prepared from water glass on the crystallinity and crystallite size of sodalite were studied. The composition of the synthetic mixtures described by $x\;Na_2O{\cdot}y\;SiO_2{\cdot}Al_2O_3{\cdot}z\;H_2O$ was varied within x=2.5~7.5, y=1.4~3.0, z=140~400. The hydrothermal reaction was carried out at $140^{\circ}C$ for 2 days. High content of $Na_2O$ resulted in the high crystallinity and small crystallite of sodalite. The $SiO_2/Al_2O_3$ molar ratios of around 2 were suitable for the synthesis of sodalite, and produced zeolite species were varied by the $H_2O$ content. Sodalite was mainly obtained with a high crystallinity from the synthetic mixtures with $SiO_2/Al_2O_3$ molar ratio of around 2 and high content of $Na_2O$. The high content of sodium ions caused a decrease in the particle sizes because of their role of structure directing agent.

• Applied Chemistry for Engineering
• /
• v.10 no.5
• /
• pp.737-742
• /
• 1999

This study was conducted for the two purposes; one was removal of dissolved humic acid, the well-known precursor of trihalomethanes (THMs), by physicochemical treatment processes such as ozone oxidation, coagulation and activated carbon adsorption. The other was qualitative identification of by-products in chlorination of the dissolved humic acid. When ozone oxidation was applied to remove the dissolved humic acid, pH was abruptly decreased. It was indicated that humic acid was not perfectly converted to $CO_2$ and $H_2O$, but to low fatty acid. In coagulation process, the coagulant was polyaluminumchloride which was widely used for drinking water treatment in recent years. With the dosage of 160 mg/L, total organic carbon(TOC), $COD_{Cr}$ and color were removed with 23%, 24% and 5% respectively. Color was effectively removed by ozone oxidation process, which was the first order reaction, with the reaction rate constant of $0.067min^{-1}$. In activated carbon adsorption process, preozonation process could remove more effectively the dissolved humic acid than that without preozonation. When the dissolved humic acid and sodium hydrochloride were reacted with 1 mg-NaOCl/mg-TOC, only trihalomethanes were detected.