• 한국축산식품학회지
• /
• 제20권3호
• /
• pp.199-206
• /
• 2000

축육 생산시 주요 부산물인 돼지 심장근으로부터 항산화제(0.02% propyl gallate, 0.2% asxorbic acid, 0.2% sodium tripolyphosphate) 첨가 세척액(25 mM phosphate buffer, pH 6.0)에 의해 제조된 surimi(5% protein 0.6 M NaCl, 25 mM phosphate buffer, pH 6.0)를 alginate(0.4%), calcium carbonate(0.075%) 및 lactate(0.6%) 등의 첨가에 의해 AC surimi 로 조제한 다음, CMC 또는 MC를 일정수준 (0.5%, 1.0%) 첨가하여 surimi 의 pH, 겔의 보수력과 조리 손실을 비롯하여 겔읨 루성을 비교 검톻였다. CMC 첨가시 pH는 0.2 단위씩 감소하는 경향을 보인데 비해 MC 첨가시에는 뚜렷한 변화를 보이지는 않았다. 조리 손실에 대한 영향을 살펴 본 결과 CMC와 MC 첨가구에서 0.5% CMC 첨가구를 제외하고서는 나머지 세 처리구에서 감소하는 경향이었고, 특히 MC 첨가시에는 대조구에 비해 뚜렷한 감소 경향을 나타내었으나(p<0.05) 첨가수준에 따른 차이는 나타나지 않았다 CMC나 MC의 첨가는 보수력에 대해서는 거의 영향을 미치지 않은 것으로 나타났고, 물성에 대한 측정 결과에서 CMC 첨가시에는 겔의 강도. 경도 및 탄성등은 약간 증가하였으나 유의적인 차이를 나타내지는 않았고 (P<0.05), MC 첨가시에는 뚜렷한 차이를 나타내지 않았으며, 겔 응집성에 대해서는 CMC와 MC 첨가에 의해 서로 다른 경향을 나타내었다.

• 한국축산식품학회지
• /
• 제43권3호
• /
• pp.491-501
• /
• 2023

Comparing the effects of sodium tripolyphosphate (STPP) concentrations of 0.2% and 0.4% on beef semitendinosus is the objective of the current investigation. The samples were cooked at varied temperatures (45+60℃ and 45+70℃) and times (1.5+1.5 h and 3+3 h) using staged cooking. The colour properties, cooking loss, water retention, shear force, water-holding capacity, sarcoplasmic, and myofibrillar solubility, and total collagen were investigated. The cooking time and temperature affected the water-holding capacity, cooking loss, CIE L^*, CIE a^*, CIE b^*, myofibrillar, and sarcoplasmic solubility, with lower temperature and short time having the lower detrimental effect. However, the significant effect can be intensified after the addition of STPP with higher water-holding capacity and tender meat obtained with 0.4% phosphate concentration at any cooking conditions. The STPP lowered the collagen content and increased the protein solubility of myofibrillar and sarcoplasmic, which this degradation is used as a good indicator of tenderness.

• 한국축산식품학회지
• /
• 제38권3호
• /
• pp.580-592
• /
• 2018

The formulation of an oil/water (o/w) emulsion made up of a mixture of perilla oil and canola oil (30/70 w/w) was optimized using a response surface methodology to find a replacement for animal fat in an emulsion-type meat product. A 12 run Plackett-Burman design (PBD) was applied to screen the effect of potential ingredients in the (o/w) emulsion, including polyglycerol polyricinoleate (PGPR), fish gelatin, soy protein isolate (SPI), sodium caseinate, carrageenan (CR), inulin (IN) and sodium tripolyphosphate. The PBD showed that SPI, CR and IN showed promise but required further optimization, and other ingredients did not affect the technological properties of the (o/w) emulsion. The PBD also showed that PGPR played a critical role in inhibiting an emulsion break. The level of PGPR was then fixed at 3.2% (w/w total emulsion) for an optimization study. A central composite design (CCD) was applied to optimize the addition levels of SPI, CR or IN in an (o/w) emulsion and to observe their effects on emulsion stability, cooking loss and the textural properties of a cooked meat emulsion. Significant interactions between SPI and CR increased the cooking loss in the meat emulsion. In contrast, IN showed interactions with SPI leading to a reduction in cooking loss. Thus, CR was also removed from the formulation. After optimization, the level of SPI (4.48% w/w) and IN (14% w/w) was validated, leading to a perilla-canola oil (o/w) emulsion with the ability to replace animal fat in an emulsion-type meat products.

• 한국식품과학회지
• /
• 제22권6호
• /
• pp.651-658
• /
• 1990

옥수수전분에 인산화반응 시약으로 Sodium tripolyphosphate(STPP)를 반응시켜 건식법, 호화법 및 Extrusion 공법에 의하여 인산전분을 제조하고 그 이화학적 성질을 비교하였다. 건식법에 의한 인산전분(DSP) 제조시 반응온도는 인산염 치환도에 가장 큰 영향을 미치는 인자로 작용하였다. 호화법에 의해 인산전분(GSP)을 제조하였을 경우는 건식법보다 치환도가 증가하였으나 반응온도가 $85^{\circ}C$ 이상에서는 큰 변화가 없었다. Extrusion공정에 의한 인산전분(WESP) 제조는 원료수분 20, 25, 30%에서 치환도 $0.0066{\sim}0.0083$의 값을 보였다. DSP 시료의 호화온도는 치환도가 증가할 수록 낮아졌고 투명도가 증가되었으나 WESP 시료는 원료전분보다 높은 호화온도를 보였다. 인산전분 extrudate의 겉보기 점도는 DSP 시료보다 낮은 점도값을 보였다. 모든 인산전분 시료가 원료전분에 비해 높은 노화안정성을 보였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권7호
• /
• pp.1021-1028
• /
• 2017

Objective: The objective of this study was to evaluate the effects of ageing time of lamb loins prior to freezing on technological characteristics and oxidation stability of coarse ground lamb loin sausage using in a model system. Methods: Lamb loins (M. longissimus lumborum, n = 25) were aged at $-1.5^{\circ}C$ for 0, 1, 2, 3, and 8 wk and then frozen for the remaining days (a total of 30 wk). The aged/frozen/thawed lamb loins were ground, and model sausages were formulated with 75% aged/frozen/thawed lamb loin, 25% water, 1.5% sodium chloride (NaCl) and 0.3% sodium tripolyphosphate. The pH and thaw/purge loss of aged/frozen/thawed lamb loins were evaluated, and protein functionality (protein solubility and emulsifying capacity), water-holding capacity and textural properties of model sausages were determined. Cooked model sausages were vacuum-packaged in a plastic bag and displayed under continuous fluorescent natural white light ($3^{\circ}C{\pm}1^{\circ}C$). Colour and lipid oxidation of the cooked model sausages were evaluated on 0 and 21 d of display storage. Results: Ageing prior to freezing had no impact on pH and purge/thaw loss of lamb loins and the colour of cooked sausages (p>0.05) made from the loins. Lamb loins aged for at least 3 wk prior to freezing numerically improved total and myofibrillar protein solubilities (p>0.05) and emulsion activity index (p = 0.009) of meat batter, but decreased cooking loss (p = 0.003) and lipid oxidation (p<0.05) of model sausages. Conclusion: This study suggests that post-mortem ageing of raw meat prior to freezing could improve water-holding capacity and lipid oxidative stability of sausage made from the meat.

• 한국식품과학회지
• /
• 제30권1호
• /
• pp.69-76
• /
• 1998

본 연구는 재구성육제품내 첨가제를 줄이는데 있어 예비혼합물에 첨가제를 전량 첨가하여 그 기능적 특성을 최대한 부여시킬 수 있는 첨가제의 종류와 이온강도 효과의 조건을 설정하고자 실시하였다. 육제품의 10%를 예비혼합들로 설정하여 돼지전지부위에 NaCl(0, 4.5, 9.0%), STPP (0, 2.5, 5.0%), PP (0, 2.44, 4.88%)를 각각 세단계로 이온강도를 같게 설정한 후 조합첨가하여 27가지 예비혼합물을 제조하고 pH와 추출한 단백질의 기능적 특성을 조사하였다. pH는 STPP와 PP의 첨가에 의해 증가하는 경향을 나타냈으며(p<0.01), 동일 이온강도에서 PP가 STPP에 비해 높은 pH증진효과를 보였다. 예비혼합물에서 추출한 단백질(1 M NaCl, 동일한 염추출 용액 사용)의 특성 중 총 단백질추출성에 대하여 동일 이온강도 하에서 phosphate 이온이 chloride 이온보다 추출효과가 뛰어났다. 단백질의 용해성은 NaCl 첨가로 용해성이 낮아졌으며(p<0.05), 단백질추출성이 좋을수록 용해성이 감소하는 것으로 나타났다. 원료육 내의 SH기 함량은 단백질추출성이 좋은 경우 SH기 함량이 높은 경향을 보였다. 단백질의 가열처리를 가상한 $65^{\circ}C$, 7분간의 단백질 추출물의 열처리 효과로 원료육의 SH기 함량이 낮아지고 소수성은 증가하였다(p<0.1). 그러나 세 첨가제에 의한 27가지의 예비혼합물에서 추출한 단백질의 전기영동상 형태는 차이가 나타나지 않았다. 결론적으로 첨가제의 조합에 의해 이온강도가 높아짐에 따라 기능적 특성이 증가되지는 않았으나 인산염 중 동일이온강도를 감안할 때 첨가제를 줄이는 방안으로는 STPP보다 PP가 좋은 것으로 판단되었다.

• 한국식품저장유통학회지
• /
• 제20권4호
• /
• pp.539-545
• /
• 2013

인산화 가교방법에 의해서 RS4 옥수수전분을 제조하고 이를 밀가루의 5, 10, 20%로 대체하여 쿠키를 제조하고 품질 특성을 비교하였다. RS4 옥수수전분의 첨가량이 증가 할수록 반죽 pH는 낮아졌으며 반죽의 밀도는 RS4 옥수수 전분 20% 첨가구에서 낮아지는 경향을 보였지만 대조구와 유의차는 없었다(p<0.05). 쿠키의 퍼짐성은 대조구 대비 RS4 옥수수전분 20%의 경우 약간 작아지는 경향은 있었지만 유의적인 차이점은 없었다(p<0.05). 쿠키의 수분함량은 RS4 옥수수전분의 첨가량이 늘어날수록 증가하는 경향을 나타내었으며 색도는 첨가량이 늘어날수록 L값이 높아졌으며 a, b값의 변화에는 유의차가 없었다(p<0.05). 쿠키의 경도(hardness)및 부서짐성(fracturability)는 첨가량이 늘어날수록 유의적으로 낮아졌다(p<0.05). 관능평가 결과 쿠키의 색상은 20% 첨가구에서는 조금 높은 점수를 받았으나 유의차는 없었으며 풍미는 대조구나 RS4 옥수수전분을 5%, 10%, 20% 첨가한 구나 유의차가 없었다. 조직감이나 맛도 RS4 옥수수전분을 첨가 할수록 일부 높아지는 경향을 보였지만 유의차는 없었다(p<0.05). 전체적인 기호도도 RS4 옥수수전분을 20% 첨가한 구가 3.7로서 대조구 3.2보다 약간 높아지는 경향을 보였으나 유의차는 없었다(p<0.05). 이상의 결과를 보면 쿠키의 품질이나 기호도에 영향을 주지 않고 RS4 옥수수전분을 밀가루 대비 20%까지 첨가하여 RS함량을 추가로 14.7% 상승시킨 쿠키를 제조할 수가 있었다.

• Journal of Animal Science and Technology
• /
• 제62권5호
• /
• pp.713-729
• /
• 2020

The aim of this study was to develop retorted samgyetang marinated with different levels of soy sauce and processed at different F₀ (thermal death time at 121℃) values. The tested marinade series comprised different percentages of soy sauce in water (0%, 25%, and 50% [w/w]) containing a fixed concentration of sodium tripolyphosphate (0.3% [w/w]). Following marination, samgyetang was prepared and subjected to retort processing, until an F₀ value of either 8 or 29 was achieved. Meat quality analysis of the breast meat, sensory evaluation, and aroma analysis were performed as indicators of acceptability. The meat pH decreased as the soy sauce content increased, regardless of the F₀ value. The shear force value significantly decreased as the concentration of soy sauce increased, but increased as the F₀ value increased (p < 0.05). Lipid oxidation was not affected by marination, but increased significantly as the F₀ value increased (p < 0.05). The proportion of polyunsaturated fatty acids decreased significantly (p < 0.05) as the F₀ value increased. The total alkane content decreased as the F₀ value increased (p < 0.05). Changes in the total volatile sulfur compound and 2-butyl-1-octanol content were affected by soy sauce marination. Marination using 25% soy sauce and retort sterilization, until an F₀ value of either 8 or 29 was achieved, improved the acceptability of samgyetang. Therefore, marination using 25% soy sauce and retort sterilization until an F₀ value of 8 is the process recommended for developing a soy sauce-flavored, retorted samgyetang product of acceptable quality.

• Journal of Periodontal and Implant Science
• /
• 제26권1호
• /
• pp.317-333
• /
• 1996

The main goal of periodontal regeneration is to be achieved by epithelial exclusion, periodontal ligament cell activation or alveolar bone regeneration. The purpose of this study was to investigate on the physico- chemical and biological characteristics of biodegradable chitosan beads. Chitosan beads were fabricated by ionic gelation with sodium tripolyphosphate and they had the size in 300um diameter. As therapeutic agent, flurbiprofen was incorporated into the beads by 10, 20% loading contents. The release of drugs from the chitosan beads was measured in vitro. Also, biological activity tests of flurbiprofen loaded chitosan beads including cytotoxicity test, ihhibition of $IL-1{\beta}$ production, suppression to $PGE_2$ production, collagenase inhibition test, the ability of total protein synthesis, and tissue response were evaluated. The amount of flurbiprofen released from chitosan was 33-50% during 7 days. Minimal cytotoxicity was observed in chitosan beads. Flurbiprofen released from chitosan beads significantly suppressed the $IL-1{\beta}$ production of monocyte, $PGE_2$ production and markedly inhibited collagenase activity. Meanwhile, flurbiprofen released from this system showed increased ability for protein synthesis. Throughout 4 -week implantation period, no significant inflammatory cell infiltrated around chitosan bead and also fibroblast like cell types at the beads - tissue interface were revealed with gradual degradation of implanted chitosan beads. From these results, it was suggested that flurbiprofen loaded chitosan beads can be effectively useful for biocompatible local delivery system in periodontal regeneration.

• Journal of Veterinary Science
• /
• 제23권5호
• /
• pp.78.1-78.13
• /
• 2022

Background: Florfenicol might be ineffective for treating Staphylococcus aureus small colony variants (SCVs) mastitis. Objectives: In this study, florfenicol-loaded chitosan (CS)-sodium tripolyphosphate (TPP) composite nanogels were prepared to allow targeted delivery to SCV infected sites. Methods: The formulation screening, the characteristics, in vitro release, antibacterial activity, therapeutic efficacy, and biosafety of the florfenicol composite nanogels were studied. Results: The optimized formulation was obtained when the CS and TPP were 10 and 5 mg/mL, respectively. The encapsulation efficiency, loading capacity, size, polydispersity index, and zeta potential of the optimized florfenicol composite nanogels were 87.3% ± 2.7%, 5.8% ± 1.4%, 280.3 ± 1.5 nm, 0.15 ± 0.03, and 36.3 ± 1.4 mv, respectively. Optical and scanning electron microscopy showed that spherical particles with a relatively uniform distribution and drugs might be incorporated in cross-linked polymeric networks. The in vitro release study showed that the florfenicol composite nanogels exhibited a biphasic pattern with the sustained release of 72.2% ± 1.8% at 48 h in pH 5.5 phosphate-buffered saline. The minimal inhibitory concentrations of commercial florfenicol solution and florfenicol composite nanogels against SCVs were 1 and 0.25 ㎍/mL, respectively. The time-killing curves and live-dead bacterial staining showed that the florfenicol composite nanogels were concentration-dependent. Furthermore, the florfenicol composite nanogels displayed good therapeutic efficacy against SCVs mastitis. Biological safety studies showed that the florfenicol composite nanogels might be a biocompatible preparation because of their non-toxic effects on the renal tissue and liver. Conclusions: Florfenicol composite nanogels might improve the treatment of SCV infections.