• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.292-295
• /
• 2001

A Study on the precipitation characteristics of nickel hydroxide as well as carbonate and sulfide is carried out to determine the proper treatment condition of the wastewater induced from nickel-plating industry. The nickel concentrations in the effluent could be kept lower than 5ppm when the value of pH was maintained higher than 10. The precipitation of nickel salts by alkaline addition to the nickel containing model wastewater was conducted by using proper amount of sodium hydroxide, sodium carbonate, sodium bicarbonate and sodium sulfide. In case of the sulfide treatment, the residual nickel concentration in the clear water after precipitates removed showed the lowest value. The influences of the precipitation condition upon the particle size of the crystals precipitated were also investigated. In spite of the various precipitation conditions were adopted, the particle size of the precipitated crystals showed no great differences. The sedimentation rates of the precipitated particle bed were observed and the free sedimentation period was terminated within 20 minutes. Although the hindered sedimentation as well as bed compaction progressed subsequently, the bed heights were maintained almost the same level after two hours of sedimentation.

• 공업화학
• /
• 제5권1호
• /
• pp.37-43
• /
• 1994

포피린을 촉매로 하고 1, 4-dithiothreitol(DTT)과 황화수소 등 여러 가지 환원제의 존재하에서 니트로톨루엔을 아미노톨루엔으로 환원시켰다. 니트로톨루엔의 환원 결과 생기는 중간체 및 최종 생성물이 확인되었으며, 니트로기의 아미노기로의 환원에 대한 반응경로 및 최적 pH값을 구하였다. 포피린의 촉매로서의 기능이 UV/VIS분광분석에 의해 확인되었으며 또한 반응속도상수를 측정하였다. 환원제 중에서 DTT, sodium hydrosulfite 및 황화수소가 포피린을 촉매로 한 니트로톨루엔의 환원에 대해 탁월한 환원력을 나타냄을 알 수 있었다. 특히 황화수소가 환원제로 사용될 때는 기액 반응에 의해 기상의 황화수소와 액상의 니트로톨루엔이 동시에 제거되는 효과를 얻을 수 있었다.

• The Korean Journal of Physiology and Pharmacology
• /
• 제23권4호
• /
• pp.263-270
• /
• 2019

Hydrogen sulfide is well-known to exhibit anti-inflammatory and cytoprotective activities, and also has protective effects in the liver. This study aimed to examine the protective effect of hydrogen sulfide in rats with hepatic encephalopathy, which was induced by mild bile duct ligation. In this rat model, bile ducts were mildly ligated for 26 days. Rats were treated for the final 5 days with sodium hydrosulfide (NaHS). NaHS ($25{\mu}mol/kg$), 0.5% sodium carboxymethyl cellulose, or silymarin (100 mg/kg) was administered intraperitoneally once per day for 5 consecutive days. Mild bile duct ligation caused hepatotoxicity and inflammation in rats. Intraperitoneal NaHS administration reduced levels of aspartate aminotransferase and alanine aminotransferase, which are indicators of liver disease, compared to levels in the control mild bile duct ligation group. Levels of ammonia, a major causative factor of hepatic encephalopathy, were also significantly decreased. Malondialdehyde, myeloperoxidase, catalase, and tumor necrosis factor-${\alpha}$ levels were measured to confirm antioxidative and anti-inflammatory effects. N-Methyl-D-aspartic acid (NMDA) receptors with neurotoxic activity were assessed for subunit NMDA receptor subtype 2B. Based on these data, NaHS is suggested to exhibit hepatoprotective effects and guard against neurotoxicity through antioxidant and anti-inflammatory actions.

• 한국대기환경학회지
• /
• 제31권2호
• /
• pp.173-180
• /
• 2015

The purpose of this study was to fabricate a ferric nitrate impregnated activated carbon, and the performance for hydrogen sulfide by adsorption was evaluated. Sodium hydroxide was utilized to control pH in the process during generation of ferric hydroxide on the surface of the carbon. Critical mixing duration for generation of ferric hydroxide on the carbon was 48 hrs at pH 1 of the solution, in which the chemical adsorption of hydrogen sulfide was enhanced. The adsorption capacity of the impregnated carbon increased up to 0.10 g hydrogen sulfide/g carbon, which was 4.3 times higher than that of the raw carbon. Presence of FeOOH on the surface of the impregnated carbon was examined by X-ray diffraction.

• 한국기계연구소 소보
• /
• 통권10호
• /
• pp.5-9
• /
• 1983

• Restorative Dentistry and Endodontics
• /
• 제14권1호
• /
• pp.173-177
• /
• 1989

As widely known major cause of tooth discoloration is red blood cell in dentinal tubules after tooth trauma and extirpation. Hemoglobin in the red cells easily conbine with hydrogen sulfide and change natural tooth color into dark brown. To confirm and compare the effect of bleaching agents test material was made as fellows: No. 40 paper points were soaked in blood and put into the oven for 24 hours to dry. Dried paper points were again soaked in diluted yolk by distilled water for a minute and kept the points for a week to get fully sulfide. Hydrogen peroxide (25%), Sodium hypochlorite (2%), Sodium hyposulfate (2%), Sodium perborate and mixture of Hydrogen peroxide (25%) and Sodium perborate were employed as bleaching agents. About 0.2ml of each medicaments were put into the small test tubes and blood soaked paper points were gently placed vertically with the apex downward and kept 24 hours in the oven ($37^{\circ}C$). Every 24 hours the medicaments were renewed at 24 and 48 hours. Following are the results of the study: 1. Significant bleaching effect was found on the case of hydrogen peroxide (25%) after 24 hours. The area above 2mm from apex also fully bleached after 48 hours. 2. A mixture of hydrogen peroxide and sodium perborate treated case showed moderate effect at 24 hours and significant effect at 48 hours. High portion of the point (above 2mm) was bleached satisfactory at 72 hours. 3. The effect of sodium perborate at 48 hours showed moderate and significant at 72 hours. 4. Sodium hypochlorite and sodium hyposulfate were weak agent in bleaching. At 72 hours case revealed moderate effect and influenced on high portion of the point very weak effect.

• 전기화학회지
• /
• 제14권4호
• /
• pp.225-230
• /
• 2011

Copper indium gallium selenide (CIGS) 기반 박막 태양전지는 저렴한 제작 단가 및 다른 박막 태양전지에 비해 높은 효율을 보여 실리콘 기반 태양전지의 차세대 태양전지로 각광을 받고 있다. 구성 요소 중 buffer 층은 window 층과 absorber 층 사이의 높은 밴드 갭(band gap)을 해소 해주는 역할을 한다. 기존의 cadmium sulfide(CdS)의 인체 유해성 때문에 이를 대신할 indium sulfide(In2S3)를 이용한 buffer 층의 연구가 활발히 진행되고 있다. 본 연구에서는 전기화학적인 방법을 통해 값싸고 간편하게 indium sulfide buffer 층을 전극 표면에 합성하는 연구를 진행하였다. Indium-Tin-Oxide(ITO) 전극표면을 sodium thiosulfate 및 indium sulfate의 혼합물 용액에 담그고 환원 전위를 인가하여 indium sulfide를 합성하였다. 크기가 다른 두 전압을 교대로 인가하여 확산 한계(diffusion limit)를 최소화 함으로써 표면에 균일한 조성을 가지는 buffer 층을 합성해 낼 수 있었다. 또한 합성 중 온도의 조절을 통해 buffer 층의 밴드 갭을 최적화 할 수 있었다. 이렇게 전기화학적으로 합성된 buffer 층은 X-선 광전자 분광법과 회절법의 분석을 통해 ${\beta}$-indium sulfide 결정구조를 가짐을 확인 하였다.

• 환경생물
• /
• 제23권4호
• /
• pp.374-378
• /
• 2005

A diffusion - precipitation method was developed to determine acid volatile sulfide (AVS) concentrations in freshwater sediments. This method uses silver nitrate as a sulfide trap solution and the concentration of trapped sulfide is determined gravimetrically. The proposed diffusion - precipitation method is more rapid and less expensive than previously developed purge- and - trap methods. Spiked sodium sulfide recoveries using this method $(97\~120\%)$ were similar with a previously developed diffusion - absorption method $(93.8\~115\%)$ and about $20\%$ greater than a previously developed purge-and-trap method $(74.6\~105\%)$. Detection limit of this method $(0.1\;{\mu}mole\;S\;g^{-l})$ was comparable with that of diffusion-absorption method $(0.06\;{\mu}mole\;S\;g^{-l})$ and purge-and-trap method $(0.05\~0.5\;{\mu}mole\;S\;g^{-l})$.

• 한국환경과학회지
• /
• 제9권1호
• /
• pp.43-47
• /
• 2000

A study on the remediation of heavily for ion contaminated soils from abandoned iron mine was carried out, using ex-situ extraction process. Also, oxalic acid as a complex agent was evaluated as a function of concentration, reaction time and mixing ratio of washing agent in order to evaluate Fe removability of the soil contaminated from the abandoned iron mine. Oxalic acid showed a better extraction performance than 0.1N-HCl, i.e., the concentrations of Fe ion extracted from the abandoned mine for the former at uncontrolled pH and the latter were 1,750 ppm and 1,079 ppm, respectively. The optimum washing condition of oxalic acid was in the ratio of 1:5 and 1:10 between soil and acid solution during l hr reaction. The total concentrations of Fe ion by oxalic acid and EDTA at three repeated extraction, were 4,554 ppm and 864 ppm, respectively. The recovery of Fe ions from washing solution was achieved, forming hydroxide precipitation and metal sulfide under excess of calcium hydroxide and sodium sulfide. In addition, the amounted of sodium sulfide and calcium hydroxide for the optimal revovery of Fe were 15g/$\ell$ and 5g/$\ell$ from the oxalic acid complexes, respectively.

• Bulletin of the Korean Chemical Society
• /
• 제14권2호
• /
• pp.168-169
• /
• 1993