• 콘크리트학회논문집
• /
• 제12권5호
• /
• pp.141-151
• /
• 2000

Compressive strength, sulfate deterioration factor(SDF) and length change of 5 types of mortars immersed in sodium sulfate solution were observed. As the results of tests, it was found that the sulfate resistance of blended cement mortars were superior to that of portland cement mortars. Pore volume with diameter larger than 0.1 $\mu\textrm{m}$ of 5 types of pastes indicated that the micro-structures of blended cement pastes were denser, due to pozzolan reaction and latent hydraulic properties, than those of portland cement pastes. The XRD, ESEM, EDS and TG analyses demonstrated that the reactants such as ettringite and gypsum were significantly formed in portland cement pastes. Besides, compared with the $Ca(OH)_2$ content of ordinary portland cement pastes immersed in water and sodium sulfate solution, the $Ca(OH)_2$ contents of fly ash blended cement and ground granulated blast-furnace slag cement paste were about 58% and 28% in water, and 55% and 20% in sodium sulfate solution, respectively.

• 한국가구학회지
• /
• 제19권1호
• /
• pp.83-90
• /
• 2008

Gypsum-wood composites were made by introducing inorganic substances into wood using calcium chloride, first treating solution, and sodium sulfate, secondary treating solution, by double diffusion process under atmospheric pressure at room temperature. The process conducted as follows: water saturated specimens were soaked in calcium chloride solutions at several concentration. Then the specimens were soaked further in saturated sodium sulfate solution, and they were leached in flowing tap water for 24h. To attain sufficient weight percent gain (WPG) values, the suitable concentration of calcium chloride and soaking time in saturated sodium sulfate solution were 20% and 48h, respectively. Inorganic substances were produced mainly in the lumina of tracheides. It was made sure that these substances were dihydrate gypsum($CaSO_4$ $2H_2O$) by X -ray microanalysis (SEM-EDX). The composites had good fire resistance due to low heat transfer rate of gypsum formed in wood. However, the composites had little decay resistances, because they showed high weight losses by test fungi attacks.

• The International Journal of Costume Culture
• /
• 제4권1호
• /
• pp.18-24
• /
• 2001

Agricultural drainage salt generated during irrigation of crops in San Joaquin Valley, California, exceeds 600,000 tons annually and cumulates in the field in a rapid rate. As a result, the waste is taking out more farmlands for salt storage and disposal, imposing serious concerns to environment and local agricultural industry. In searching for a potential solution to reduce or eliminate the waste, this research explored feasibility of producing a value -added product, sodium sulfate, from the waste and utilizing the product in textile dyeing. The results indicated that sodium sulfate could be produced from the salt and could be purified by a recrystalization method in a temperature range within the highest and lowest daily temperatures in summer in the alley. The recovered sodium sulfate samples, with purities ranging from 67% to 99.91, were compared with commercially available sodium sulfate in direct dyeing of cotton fabrics. The salt samples recovered from Mendata, California (〉98.8% sodium sulfate) cause little color difference in the dyeing with selected direct dyes, and the purified salt (Ⅲ) (99.91% sodium sulfate) is more applicable for direct dyeing of cotton fabrics if it has no other toxic effects. The recovered sodium sulfate from certain areas in the valley could not be employed in direct dyeing due to the high level of impurities in it.

• 복식문화연구
• /
• 제11권3호
• /
• pp.416-422
• /
• 2003

Agricultural drainage salt generated during irrigation of crops in San Joaquin Valley, California, exceeds 600,000 tons annually and cumulates in the field in a rapid rate. As a result, the waste is taking out more farmlands for salt storage and disposal, imposing serious concerns to environment and local agricultural industry. In searching for a potential solution to reduce or eliminate the waste, this research explored feasibility of producing a value-added product, sodium sulfate, from the waste and utilizing the product in textile dyeing. The results indicated that sodium sulfate could be produced from the salt and could be purified by a recrystalization method in a temperature range within the highest and lowest daily temperatures in summer in the valley. The recovered sodium sulfate samples, with purities ranging from 67% to 99.91, were compared with commercially available sodium sulfate in the dyeing of levelling dyes with nylon/wool fabrics. In nylon/wool fabrics, C.I. Acid Yellow 23 had similar exhaustions among Na₂SO₄ I, Na₂SO₄ II, Na₂SO₄ III and Na₂SO₄ Ⅴ which had similar ratios of sodium sulfate and sodium chloride in recovered salts. Na₂SO₄ Ⅳ had low exhaustion which had low ratios of sodium sulfate and sodium chloride. In nylon/wool fabrics, C.I. Acid Blue 158 had similar exhaustions among Na₂SO₄ I, Na₂SO₄ II, Na2₂SO₄ III, Na₂SO₄ IV and Na₂SO₄ Ⅴ despite of Na₂SO₄ Ⅳ had low ratios of sodium sulfate and sodium chloride Generally, the dyeing of levelling dyes using recovered salts from farm drainage has similar or low exhaustion than the dyeing of levelling dyes using commercial sodium sulfate.

• The International Journal of Costume Culture
• /
• 제4권2호
• /
• pp.86-93
• /
• 2001

Agricultural drainage salt generated during irrigation of crops in San Joaquin Valley, California exceeds 600,000 tons annually and cumulates in the field in a rapid rate. As a result, the waste is taking out more farmlands for salt storage and disposal, imposing serious concerns to environment and local agricultural industry. in searching for a potential solution to reduce or eliminate the waste, this research explored feasibility of producing a value-added product, sodium sulfate, from the waste and utilizing the product in textile dyeing. The result indicated that sodium sulfate could be produced the salt and could be purified by a recrystalization method in a temperature range within the highest and lowest daily temperatures in summer in the valley. Re recovered sodium sulfate samples, with purifies ranging from 67% to 99.91, were compard with commercially available sodium sulfate in directive dyeing of cotton fabrics. Direct Yellow 27 and direct Blue 1 had similar exhaustions among Na₂So₄Ⅰ, Na₂So₄Ⅱ, Na₂So₄Ⅲ and V which had similar ratios of sodium sulfate and sodium chloride in recovered salts. Na₂So₄Ⅳ had high exhaustion despite low ratios of sodium sulfate and sodium chloride. In direct Red 80, exhaustion depends more on the ratios of sodium sulfate and sodium chloride than sodium chloride. Na₂SO₄Ⅳ and Na₂SO₄V with high ratios of sodium chloride had more exhaustion than Na₂So₄and Na₂So₄Ⅲ with low ratios of sodium chloride. Generally, directive dyeing using recovered salts from farm drainage has similar or more excellent exhaustion than directive dyeing using commercial sodium sulfate.

• 한국가구학회지
• /
• 제19권5호
• /
• pp.358-364
• /
• 2008

Wood-inorganic material composite (WIC) was prepared by impregnating wood with copper sulfate ($CuSO_4\;5H_2O$) solution and by immersed wood in sodium carbonate($Na_2CO_3$) solution in order to introduce insoluble copper compounds {copper carbonate hydroxide, $CuCO_3\;Cu(OH)_2$} into the wood to give fungicidal effects in treated-wood. The weight percent gains (WPGs) of treated wood reached maximum value by impregnation of 20% copper sulfate solution and immersion in about 15% sodium carbonate solution for 24 hrs. Inorganic substances were present mainly in the lumina and cross-field pitting of tracheides. These substances were proved to be the insoluble copper carbonate hydroxide against water by the energy dispersive X-ray analyzer in conjunction with a scanning electron microscope (SEM-EDXA). The treated specimens showed high preservative effectiveness because the weight losses were hardly occurred by the fungi degradation test.

• 대한화학회지
• /
• 제40권4호
• /
• pp.283-286
• /
• 1996

• The International Journal of Costume Culture
• /
• 제6권1호
• /
• pp.11-18
• /
• 2003

Agricultural drainage salt generated during irrigation of crops in San Joaquin Valley, California, exceeds 600,000 tons annually and cumulates in the field in a rapid rate. As a result, the waste is taking out more farmlands for salt storage and disposal, imposing serious concerns to environment and local agricultural industry. In searching for a potential solution to reduce or eliminate the waste, this research explored feasibility of producing a value-added product, sodium sulfate, from the waste and utilizing the product in textile dyeing. The results indicated that sodium sulfate could be produced from the salt and could be purified by a recrystallization method in a temperature range within the highest and lowest daily temperatures in summer in the valley. The recovered sodium sulfate samples, with purities ranging from 67% to 99.91, were compared with commercially available sodium sulfate in the dyeing of levelling dyes. In nylon fabrics, the salt samples had little color difference in the dyeing with C.I. Acid Yellow 23 and C.I. Acid Blue 158. All salt samples' gray scale was 5 grade. In wool fabrics, the salt samples had little color difference in dyeing with C.I. Acid Yellow 23 and C.I. Arid Blue 158. All salt samples' gray scale was 5 grade. Generally, the dyeing of levelling dyes using recovered salts from farm drainage had little color difference than the dyeing of levelling dyes using commercial sodium sulfate.

• 자원리싸이클링
• /
• 제26권5호
• /
• pp.39-47
• /
• 2017

본 연구에서는 희토류 황산수용액으로부터 희토류 원소를 철로부터 분리/회수하고자, 황산나트륨을 이용한 희토류 황산복염 침전반응에 관하여 고찰하였다. 네오디뮴(Nd)은 황산나트륨과 결합하여 복염으로 침전이 용이하게 일어나는 반면에 디스프로슘(Dy)은 황산복염으로 침전되기 위해서 과량의 황산나트륨이 필요하였다. 또한 황산수용액에서 네오디뮴의 존재는 디스프로슘 황산복염 침전을 촉진시켜서 디스프로슘 황산복염 침전률을 증가시켰다. 본 연구에서 사용된 네오디뮴 함량 23.39 mg/ml, 디스프로슘 함량 8.67 mg/ml인 황산수용액으로부터 반응온도 $60^{\circ}C$, 반응 3시간에서 황산나트륨을 7 당량 첨가하였을 때, 네오디뮴 복염 침전률은 99.7%, 디스프로슘 복염 침전률은 94.3%이었다. 또한 네오디뮴과 디스프로슘의 황산복염 침전특성을 이용한 두 원소의 분리 가능성을 고찰한 결과, 염화나트륨 첨가에 의한 염석효과가 디스프로슘 품위 증가에 중요한 역할을 하며 본 연구조건에서 최대 98.7% 품위의 디스프로슘을 얻을 수 있었다.

• 한국세라믹학회지
• /
• 제42권5호
• /
• pp.338-345
• /
• 2005

To prepare the complex gel of flux and pseudo-boehmite used in precursor of the flaky ${\alpha}-A1_2O_3$ crystal, aqueous solution of the mixture of sodium carbonate and sodium phosphate was added with stirring in aqueous solution of the mixture of sodium sulfate, potassium sulfate and titanium sulfate. The complex gel was dried at $110^{\circ}C$ and was crystallized above $1,050^{\circ}C$, and then the effect of the amount of titanium sulfate on size, morphology, thickness and crystal size distribution of the flaky ${\alpha}-A1_2O_3$ crystal was investigated. Addition of titanium sulfate was prevented the aggregation and generation of twin crystal, and had an effect on the crystal size and the thickness during crystal growth. When the amount of titanium sulfate was more than 6 g, particle size was decreased but was free from crystal twining and aggregation. On the other hand, when the amount of titanium sulfate was lower than 6 g, crystal size was increased but crystal twinning and aggregation were noticed.