• Journal of the Korean earth science society
• /
• v.21 no.1
• /
• pp.81-92
• /
• 2000

The purpose of this study is to elucidate the characteristic of this study is of attitudinal variation of water quality for nine representative springs in the Halla mountain region. The evolutional processes of the spring water also have been studied. Results of hydrogeochemical analyses show that Gwaneumsa spring is very high in pH. The spring waters from Yungsil, Namguksunwon, Sungpanark Oremok and Gwaneumsa which springs situated lower than 1000m in altitude are relatively high concentrations in chloride, sulphate, nitrate nitrogen and sodium ions, indicating that they are affected by surrounding pollution sources. The concentrations of bicarbonate, sulphate and hydrogen ions in spring waters increase when the precipitation increases, whereas the concentrations of nitrate nitrogen, chloride and calcium ions decrease with increasing amounts of precipitation. The magnesium, sodium and electrical conductivity are nearly independent of the precipitation. The spring waters in the Halla mountain region belong to the groups of sodium or potassium type and bicarbonate type, except the Baegrogdam and Wiseorm spring water.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.8
• /
• pp.1300-1302
• /
• 2005

• Bulletin of the Korean Chemical Society
• /
• v.12 no.6
• /
• pp.709-709
• /
• 1991

• Journal of Soil and Groundwater Environment
• /
• v.10 no.1
• /
• pp.1-5
• /
• 2005

Nitrate reduction with zero valent iron $(Fe^0)$ has been extensively studied, but the proper treatment for ammonium byproduct has not been reported yet. In groundwater, however, ammonium is regarded as contaminant species, and particularly, its acceptable level is regulated to 0.5 mg-N/L. for drinking water. This study is focused on developing new material to reduce nitrate and properly remove ammonium by-products. A new material, Fe-loaded zeolite, is derived from zeolite modified by Fe(II) chloride followed by reduction with sodium borohydride. Batch experiments were performed without buffer at two different pH to evaluate the removal efficiency of Fe-loaded zeolite. After 80 hr reaction time, Fe loaded zeolite showed about $60\%$ nitrate removal at initial pH of 3.3 and $40\%$ at pH of 6 with no ammonium release. Although iron filing showed higher removal efficiency than Fe-loaded zeolite at each pH, it released a considerable amount of ammonium stoichiometrically equivalent to that of reduced nitrate. In terms of nitrogen species including $NO_3-N$ and $NH_4^+-N$, Fe-loaded zeolite removed about $60\%\;and\;40\%$ of nitrogen in residual solution at initial pH of 3.3 and 6, respectively, while the removal efficiency of iron filing was negligible.

• Corrosion Science and Technology
• /
• v.6 no.6
• /
• pp.304-307
• /
• 2007

As to the reflection electrode of LCD (liquid crystal displays), silver-copper-gold alloy (hereafter, it is called as ACA (Ag98%, Cu1%, Au1%)) is an effective material of which weathering resistance can be improved more compared with pure silver. However, there is a problem that gold remains on the substrate as residues when ACA is etched in cerium ammonium nitrate solution or phosphoric acid. Gold can not be etched in these etchants as readily as the other two alloying elements. Gold residue has actually been removed physically by brushing etc. This procedure causes damage to the display elements. Another etchant of iodine/potassium iodide generally known as one of the gold etchants can not give precise etch pattern because of remarkable difference in etching rates among silver, copper and gold. The purpose of this research is to obtain a practical etchant for ACA alloy. The results are as follows. The cyanogen complex salt of gold generates when cyanide is used as the etchant, in which gold dissolves considerably. Oxygen reduction is important as the cathodic reaction in the dissolution of gold. A new etchant of sodium cyanide / potassium ferricyanide whose cathodic reduction is stronger than oxygen, can give precise etch patterns in ACA alloy swiftly at room temperature.

• KSBB Journal
• /
• v.9 no.2
• /
• pp.147-156
• /
• 1994

A study was carried out for production of a pigment : bluish purple, using a mutant Streptomyces californicus KS-89-7. The mutant was induced from Streptomyces californicus KS-89 with N-methyl-N-nitro-N-nitrosoquanidin(MNNG). It was immobilized on an inert substance made of colloidal sillica and 3.5% sodium alginate with 1 to 10 ratio. The diameter of inert bead was 2mm, and number of immobilized mutant spore was approximately $1.0{\times}10^7$/ml. It was packed in a column reactor and fermentation was conducted with a substrate made of soluble starch 1%, glycerol 1.0%, sodium glutamate 0.1%, sodium nitrate 0.05%, L-prolin 0.025% and with some trace elements. The aeration for production of the pigment was 2.5m1/min with semi-continuous fermentation. The pigment production reached at peak on 8 days of fermentation, and the mutant produced the pigment 1.8 times more than its parent strain with the maximum pigment production of $1.72g/\ell$. The pigment production continued for 24 hours of fermentation, and at the end of the fermentation the mutant produced the pigment $1.52g/\ell$.

• Korean Journal of Environmental Agriculture
• /
• v.22 no.3
• /
• pp.197-202
• /
• 2003

Phosphorus is one of the major plant growth limiting nutrients, despite being abundant in soils in both inorganic and organic forms. Phosphobioinoculants in the form of microorganisms can help in increasing the availability of accumulated phosphates for plant growth by solubilization. Penicillium oxalicum CBPSTsa, isolated from paddy rhizosphere, was studied for its phosphate solubilization. The influence of various carbon sources like glucose, sucrose, mannitol and sorbitol and nitrogen sources like arginine, sodium nitrate, potassium nitrate, ammonium chloride and ammonium sulphate were evaluated using liquid media with tricalcium phosphate (Ca-P), ferric phosphate (Fe-P) and aluminium phosphate (Al-P). Maximum soluble phosphate of 824 mg/L was found in the amendment of sucrose-sodium nitrate from 5 g/L of Ca-P. Mannitol, sorbitol, and ariginine were poor in phosphate solubilization. While sucrose was better carbon source in solubilization of Ca-P and Al-P, glucose fared better in solubilization of Fe-P. Though all the nitrogen sources enhanced P solubilization, nitrates were better than ammonium In the amendments of ammonium chloride and ammonium sulphate, higher uptake of available phosphates by the fungus was found, and this resulted in depletion of available P in Fe-P amendment Phosphate solubilization was accompanied by acidification of the media, and the highest pH decrease was observed in glucose amendment Among the nitrogen sources, ammonium chloride favored greater pH decrease.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.386-392
• /
• 2020

The self-weight of the 3D printing concrete increases with increasing printing height. Therefore, the lower layer must be hardened within a suitable time to secure continuous printing performance. In particular, the hardening speed of concrete is slow in the winter season when the temperature was low. Hence, the early strength of 3D printing concrete requires improvement. In domestic and international literature, cases of increasing the early strength of concrete using inorganic chemical additives, such as amine-based, nitrate-based, sodium-based, and calcium-based, have been reported. In this study, early strength improvement-type additive samples (amine-based, nitrate-based, sodium-based) were prepared, and their performance was evaluated. When using a nitrate-based additive, the early strength was increased significantly in a 10 ℃ environment. In addition, it was possible to secure a higher early strength than the existing 3D printing concrete mixed at 20 ℃.

• Microbiology and Biotechnology Letters
• /
• v.15 no.2
• /
• pp.135-139
• /
• 1987

Aspergillus sp. MK-24 was cultured at 3$0^{\circ}C$ in the medium consisting of 2% glucose, 0.2% NaNO$_3$, 0.02% $K_2$HPO$_4$, 0.02% MgSO$_4$ 7$H_2O$, 0.02% KCl, and at initial pH of 5.0. The production of the inhibitor on venom proteinase reached to the maximum in 7 days. Sodium nitrate or potassium nitrate as a nitrogen source was favorable. The production of inhibitor was not affected by the addition of most of the inorganic salt used but depressed by lead, zinc, cobalt, mercuric or silver salts.

• Korean Journal of Medicinal Crop Science
• /
• v.23 no.6
• /
• pp.446-453
• /
• 2015

Background : Excessively high concentration of sodium ion causednutrient deficiency and significantly decrease growth. This study was carried out to determine the limiting concentration range of sodium ion in the soil of ginseng field. Methods and Results : The growth of the ginseng cultivar Chunpoong reduced with increase in salinity, and the rate of growth reduction was higher in shoots than that of roots. Particularly, ginseng plants cultivated at high level of nitrate nitrogen or sodium may suffer delayed development and stunted growth. Chlorophyll damage occurred on the leaves of ginseng planted in relatively high levels (> $0.2cmol^+/kg$) of sodium ion, as determined by the fluorescence reaction. The incidence of physiological disorder in ginseng cultivated at 249 sites was correlated with the concentration of sodium ion in the soils. About 74% of ginseng fields in which physiological disorders occurred had concentrations of sodium ion in soil greater than $0.2cmol^+/kg$. In contrast, the concentration of sodium ions at 51 of 85 sites where no damage occurred was relatively ($0.05cmol^+/kg-0.15cmol^+/kg$). Conclusions : The concentration of sodium ion in soil of ginseng fields can be classified into three levels optimum (${\leq}0.15$), permissible allowance (0.15 - 0.2) and excessive (> 0.2).