• 한국세라믹학회지
• /
• 제32권9호
• /
• pp.1076-1084
• /
• 1995

A mixture of aluminum isopropoxide (Al(OC3H7i)3) solution and sodium hydroxide (NaOH) solution was hydrolyzed in the range between pH 1~14. the powder obtained from sol-gel process was calcined at several temperatures and crystallization behaviors of various samples were investigated. The hydrolyzed sols of pH 1~6 wre clear, or near clear. On the other hand, powder precipitated from sols of pH 7~14. The sample obtained from pH 3 solution crystallized via complicated route, and $\beta$-Al2O3 and $\beta$"-Al2O3 phases appeared at lower temperature than samples from other pH conditions. And the quantity of remained $\beta$"-Al2O3 phase after heat treatment at 150$0^{\circ}C$ was more than samples from other pH conditions. After sintering, ionic conductivities were 1.3$\times$10-4S.cm-1 to 0.76$\times$10-4S.cm-1.0-4S.cm-1.

• 대한가정학회지
• /
• 제36권1호
• /
• pp.1-11
• /
• 1998

The purpose of this study is to find troubles in producing and using the reclaimed soaps to get the solutions of their troubles. Five kinds of reclaimed soaps were taken from religious or civic organizations and nine kinds of soaps were made by adding sodium hydroxide of different concentrations to the used vegetable oil in our laboratory. Washing efficiency, pH test, BOD, and skin irritability of the reclaimed of manufactured soaps were examined. The washing efficiency of the manufactured soaps were ±80%. The percent of free-alkali tended to increase as the amount of NaOH increased. The skinirritability was proportional to the amount of NaOH added. To make the reclaimed soap, the best percent of NaHO to used oil is 17% or 18% and this ratio(17%∼18%) should be kept. Manufactured soaps by this ratio have good apperance condition and washing efficiency. And also they have low skin irritability and free-alkali. This study has the limitations that the skin irritability test can have individual and the collected soaps couldn't represent all kinds of recaimed soap.

• 한국응용과학기술학회지
• /
• 제31권1호
• /
• pp.92-100
• /
• 2014

비이온계면활성제 가운데 솔비톨계 계면활성제인 Span을 이용해 수열합성법으로 수산화마그네슘을 합성하였다. 수산화마그네슘 합성의 전구체는 염화마그네슘과 수산화나트륨을 사용하였다. 비이온 계면활성제는 안정제와 분산제 그리고 표면 개질제로 적용하였다. 비이온 계면활성제를 첨가하였을 경우 수산화마그네슘 입자는 좀 더 작고 균일한 크기와 좋은 분산성을 나타내었으며, 소수성 성질을 나타내었다. 합성된 입자의 특성은 PSA, SEM, EDS, XRD 그리고 FT-IR을 통해 확인하였다. 기기 분석을 통해 개질 전과 후의 수산화마그네슘의 소수성, 분산성 특성을 비교하였다. 또한 실험조건에 따라 수산화마그네슘 입자의 표면 개질 특성 변화를 확인하였다.

• Structural Engineering and Mechanics
• /
• 제70권6호
• /
• pp.671-681
• /
• 2019

This paper examines the applicability of artificial neural network (ANN) and multivariate adaptive regression splines (MARS) to predict the compressive strength of bacteria incorporated geopolymer concrete (GPC). The mix is composed of new bacterial strain, manufactured sand, ground granulated blast furnace slag, silica fume, metakaolin and fly ash. The concentration of sodium hydroxide (NaOH) is maintained at 8 Molar, sodium silicate ($Na_2SiO_3$) to NaOH weight ratio is 2.33 and the alkaline liquid to binder ratio of 0.35 and ambient curing temperature ($28^{\circ}C$) is maintained for all the mixtures. In ANN, back-propagation training technique was employed for updating the weights of each layer based on the error in the network output. Levenberg-Marquardt algorithm was used for feed-forward back-propagation. MARS model was developed by establishing a relationship between a set of predictors and dependent variables. MARS is based on a divide and conquers strategy partitioning the training data sets into separate regions; each gets its own regression line. Six models based on ANN and MARS were developed to predict the compressive strength of bacteria incorporated GPC for 1, 3, 7, 28, 56 and 90 days. About 70% of the total 84 data sets obtained from experiments were used for development of the models and remaining 30% data was utilized for testing. From the study, it is observed that the predicted values from the models are found to be in good agreement with the corresponding experimental values and the developed models are robust and reliable.

• 한국토양비료학회지
• /
• 제50권6호
• /
• pp.554-561
• /
• 2017

Under the projected global warming, release of carbon as $CO_2$ through soil organic matter decomposition is expected to increase. Therefore, accurate measurement of $CO_2$ released from soil is crucial in understanding the soil carbon dynamics under increased temperature conditions. Sodium hydroxide (NaOH) traps are frequently used in laboratory soil incubation studies to measure soil respiration rate, but decreasing $CO_2$ gas solubility with increasing temperature may render the reliability of the method questionable. In this study, the influences of increasing temperature on the $CO_2$ capture capacity of NaOH traps were evaluated under $5{\sim}35^{\circ}C$ temperature range at $10^{\circ}C$ interval. Two closed-chamber experiments were performed where NaOH traps were used to capture $CO_2$ either released from acidified $Na_2CO_3$ solution or directly injected into the chamber. The sorption of ambient $CO_2$ within the incubators into NaOH traps was also measured. The amount $CO_2$ captured increased as temperature increased within 2 days of incubation, suggesting that increased diffusion rate of $CO_2$ at higher temperatures led to increases in $CO_2$ captured by the NaOH traps. However, after 2 days, over 95% of $CO_2$ emitted in the emission-absorption experiment was captured regardless of temperature, demonstrating high $CO_2$ absorption efficiency of the NaOH traps. Thus, we conclude that the influence of decreased $CO_2$ solubility by increased temperatures is negligible on the $CO_2$ capture capacity of NaOH traps, supporting that the use of NaOH traps in the study of temperature effect on soil respiration is a valid method.

• 한국콘텐츠학회논문지
• /
• 제13권9호
• /
• pp.392-399
• /
• 2013

본 연구는 건설 산업에 있어서 지구온난화의 주된 원인으로 알려져 있는 시멘트를 고로슬래그 미분말로 대체하기 위한 기초적인 연구를 수행한 것으로, 고로슬래그 및 알칼리 자극제를 사용하여 시멘트 콘크리트와 같은 성질을 가지는 경화체의 제조가 가능한지에 대한 실험적 검토를 실시하였다. 이를 위하여 시멘트 대체재로 철강 산업의 부산물인 고로슬래그 미분말과 자극제로 수산화칼륨(KOH), 수산화칼슘($Ca(OH)_2$), 수산화나트륨(NaOH) 등을 사용하여 공시체를 제작한 후, 휨 및 압축강도, XRD, EDS 및 SEM 등에 대한 측정을 실시함으로써 무시멘트 경화체의 반응 특성에 대하여 분석을 실시하였다. 그 결과 고로슬래그에 함유되어 있던 $SiO_2$, CaO 등이 용출되어 시멘트의 수화반응과 같은 칼슘 실리케이트(C-S-H) 수화물을 생성하는 것으로 나타나 고로슬래그 미분말을 사용하여 무시멘트 경화체의 제조가 가능할 것으로 나타났으며, 이후 건설 산업에 있어서 가장 중요한 콘텐트 중에 하나인 시멘트 제조에 수반하는 $CO_2$ 발생량을 줄이기 위한 추가적인 연구가 필요할 것으로 판단된다.

• Applied Biological Chemistry
• /
• 제27권3호
• /
• pp.214-216
• /
• 1984

Alkali gelatinization of rice, corn, arrow root and ginger root starches at various sodium hydroxide concentrations was investigated. Critical concentrations of alkali for starch gelatinization ranged from 2.33 to 3.17 meq NaOH per gram of starch. Ginger root starch was most resistant to alkali gelatinization and arrow root starch was least stable to alkali.

• Korean Chemical Engineering Research
• /
• 제45권2호
• /
• pp.172-177
• /
• 2007

신경작용제의 일종인 고농도의 사린(GB)을 무해한 물질로 전환하기 위한 실험 조건을 찾기 위하여 가성소다 수용액으로 가수분해 하였다. 가수분해 반응은 쟈켓이 부착된 소형 반응기에 circulator를 연결하여 사용하고 2.05 당량의 가성소다 용액에 농도 10 wt%의 사린을 주입한 후 각각의 반응온도(50, 70 및 $90^{\circ}C$)에서 반응 속도 상수를 구하고 이를 이용하여 각 온도에서 GB를 99% 이상 분해하는데 소요되는 가수분해 시간을 예측하였다. 가수분해 실험 결과 GB는 $90^{\circ}C$에서 1.2 시간 반응하면 99.99% 이상 분해되었으며 주요 분해생성물은 isopropyl methylphosphonate이었다.

• 한국수소및신에너지학회논문집
• /
• 제20권1호
• /
• pp.1-8
• /
• 2009

Hydrogen production by the reaction of aluminum alloys and NaOH solution was studied for an automotive proton exchange membrane fuel cell(PEMFC) application. In our experiment conditions($30{\sim}75^{\circ}C$, NaOH $0.5{\sim}5M$), passivation of aluminum was not occurred. Higher rate of hydrogen production was observed at the reaction with Al alloys that contain impurities. With an increase in reaction temperature, hydrogen production rate by an increase in NaOH concentration increased much. When hydrogen was fed into the anode without filtering, PEMFC cell performance decreased 35% by ionic contamination such as $Na^+$ on the membrane and electrode. Thus, filtering of produced hydrogen is necessary for PEMFC operation.

• 환경위생공학
• /
• 제15권1호
• /
• pp.62-68
• /
• 2000

This study was investigated to the recovery of alumina from the first calcined waste pottery using alkaline sintering. This study was based on calcination result of a commercial ${\alpha}-Al2_O_3$ with NaOH powder. $NaAlO_2$ was formed by calcination of ${\alpha}-Al_2O_3$ with NaOH and conversion of $NaAlO_2$ from ${\alpha}-Al_2O_3$ was 91.4% at calcination condition ; weight ritio of $NaOH/{\alpha}-Al2_O_3$ 1.5, $800^{\circ}C$, and 90min. The first calcined waste porrery from the manufacturing Procedure of H Ltd. was grinded to 170/270mesh by a ball mill and calcined over $500^{\circ}C$ with NaOH powder. The calcined sample was dissolved in $25^{\circ}C$ water and sodiumaluminosilicate solid was formed. After filtration, the contained aluminum was leached out by dissolving sodiumaluminosilicate solid in 1N HCl. We estimated the efficiency of Al extraction from waste pottery by ICP analysis and NaOH was added to the filtrate and then aluminum compound was precipitated with $Al(OH)_3$ and recovered. The investigation was carried out with the variables ; the calcination temperature($500-900^{\circ}C$), the calcination time(30~90min), and the weight ratio of NaOH/waste pottery(0.5~1.5). The treatment efficiency of the waste pottery and the recovery of Al as 97.9%, 91.9% were obtained under the optimum conditions as followed ; the weight ratio of NaOH/waste pottery was 1.5 and the calcination conditions were $900^{\circ}C$ and 60min.