• 한국분말재료학회지
• /
• 제9권5호
• /
• pp.365-369
• /
• 2002

Silica hydrogel was synthesized by the reaction of liquid sodium silicate with sulfuric acid. The condensation polymerization of the synthesized hydrogel was carried out via an aging process under the acidic or alkaline conditions. Nano porous silica with the pore size below 3 nm and surface area of $715m^2/g$, was obtained by the above processes in acidic ranges(pH : 3~5). The pore size and surface area of the silica varied with pH, and in alkaline ranges(pH : 8~10), those were 21 nm and $300m^2/g$ respectively. The characteristics of the silica varied with the thermal treatment which caused the change of surface area, pore volume and pore diameter.

• 한국세라믹학회지
• /
• 제37권6호
• /
• pp.517-523
• /
• 2000

Effect of catalysts, which was catalyzed by acid(HCl and HNO3) and base(NH4OH), on characteristics of the mullite powders prepared by sol-gel methdo wa sinvestigated by XRD, TGA, SEm AND BET. As a result, weight loss as a function of catalysts was in order of HCl=32.6%>HNO3=25.44%>Non=24.0%>NH4OH=22.5%. The mullite powder dried at 100$^{\circ}C$ appeared spherical shape in acid catalyst and different shape in base catalyst, but sintering powder at 1400$^{\circ}C$ appeared very fine particle of 0.05∼0.1$\mu\textrm{m}$ regardless of catalysts. In all cae, the pore quantity, which was capable to adsoprtion, was decreased with increasing temperature. In base catalyst, no change of special surface area in mullite appeared.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.377-378
• /
• 2010

본 연구는 해양콘크리트용 소재로서 나노실리카의 종류 및 혼입량에 따른 시멘트 복합체의 공학적 특성을 분석하였으며, 시험 결과 시멘트 복합체의 강도 및 공극 특성 개선에 효과적인 나노실리카는 Sodium Silicate계인 것으로 나타났으며, 적정 혼입률은 5% 이하인 것으로 나타났다.

• 한국건설순환자원학회논문집
• /
• 제3권1호
• /
• pp.80-86
• /
• 2007

In this study we experimented setting time and basic properties as waste wood fiber and sodium silicate substitution rate to reuse waste wood fiber produced in construction field to wood chip board. To do this construction waste woods were crushed with the size less than 10mm, mixed with the rate of 1:2, 2.5, 3, and added sodium silicate with the rate of 0, 5% of cement content. The results are as follows. As the substitution rate of construction waste wood was increased delay of setting time was also increased, and the batch of adding 5% accelerator had a 13~17 hours faster setting time than non accelerator batch. The compressive strength was lower as wood substitution rate was higher, and as the specific gravity was higher, the strength was also higher. As wood substitution rate was higher, heat conductivity was lower, and as specific gravity was higher, heat conductivity also was higher.

• 한국세라믹학회지
• /
• 제44권9호
• /
• pp.465-470
• /
• 2007

This paper presents an experimental study of the sulfate resistance of mortars and pastes exposed to sodium sulfate solutions up to one year. In order to check deterioration modes due to sulfate attack, the sodium sulfate solution was varied at three concentration steps (3,380, 10,140 and 33,800 ppm of $SO_4^{2-}$ ions), and maintained at ambient temperature. The tests include a visual examination, expansion and compressive strength loss measurements as well as x-ray diffraction tests. The experimental data indicated that the use of cement with a low $C_3A$ content and low silicate ratio has a beneficial effect on the sulfate attack of mortars. In contrast, the mortars with a high $C_3A$ content and high silicate ratio became severely degraded due to the formation of ettringite, gypsum and/or thaumasite in the cement matrix.

• 한국세라믹학회지
• /
• 제26권3호
• /
• pp.361-370
• /
• 1989

Mullite powders were synthesized from the common solution of aluminum sulfate and sodium silicate solutions by the emulsion-hot kerosene technique. The reaction temperature and mechanism for mullitization and the characteristics of synthesized mullite powders were investigated. The effect of Na components introduced from sodium silicate solution on the physical property and microstructure of sintered mullite was also examined. It was proved that mullites were formed at 75$0^{\circ}C$ through the reaction mechanism of Na2O.2.2SiO2＋3.3Al2(SO4)3longrightarrow1.1(3Al2O3.2SiO2)＋Na2SO4＋8.9SO3. Synthetic mullite powders consisted of the compositiion of 3Al2O3.2SiO2 and showed highly agglomeration of hollow spherical particles of 1${\mu}{\textrm}{m}$ diameter. The density and fracture toughness of sintered mullites were somewhat reduced because of the effect of a very small amount of residual Na components.

• 콘크리트학회논문집
• /
• 제24권6호
• /
• pp.745-752
• /
• 2012

이 연구는 혼합 알칼리 활성화 슬래그 모르타르의 압축강도에 미치는 영향에 관한 것이다. 활성화제의 효과는 활성화제의 종류, 농도 등이 강도에 영향을 미치는 것으로 알려져있다. 혼합 활성화제는 5가지 가소성 알칼리(수산화나트륨, 수산화칼슘, 수산화마그네슘, 수산화알루미늄, 수산화칼륨)와 탄산나트륨($Na_2CO_3$)를 혼합하였다. 배함은 각 활성화제를 1M, 2M, 그리고 3M의 서로 다른 농도로 하였다. 압축강도 결과는 혼합 알칼리 활성화 슬래그 모르타르는 탄산나트륨의 농도가 증가하면 증가하는 것으로 나타났다. 혼합 활성화제를 사용한 알칼리 활성화 슬래그 모르타르는 모든 재령과 시험체가 탄산나트륨을 혼합하지 않은 컨트롤 케이스보다 향상된 강도를 나타내었다. 전자주사현미경(SEM) 관찰 결과 활성화 반응으로 C-S-H와 aluminusilicate gel이 생성된 것을 볼 수 있었다.

• 한국가정과학회지
• /
• 제6권1호
• /
• pp.27-34
• /
• 2003

We investigated the bacterial and chemical retting conditions of ramie grown in Hansan. Bacterial retting was done in troughs at a temperature of 30${\pm}$2$^{\circ}C$ for 1, 2, 3, 4, 5, 6 and 10 days. Chemical retting(CR) was done at the different conditions using sodium silicate (Na$_2$SiO$_3$), sodium carbonate(Na$_2$CO$_3$) and sodium hydroxide(NaOH) as alkali solutions. The retting solution was boiled during 1. 2, 4 and 6 hours respectively at the different concentration(0.5, 2.0, 4.0, 6.0. 8.0 %) with decorticated ramie stems submerged in it. The treated ramie was then rinsing with running tap water thoroughly, which was further soaker in 0.5% acetic acid (v/v) solution for three minutes and washed thoroughly with distilled water. Finally ramie was dried for 2 hours in vacuum oven at 100 $^{\circ}C$. To know change of ramie fiber characteristics retted at the different conditions, weight loss, fiber bundle strength were tested and color, texture, luster etc. were also sensually evaluated. The results were as follows. $.$ Weight loss of ramie retted in each alkali solutions were about 10%, 20% and 30% in sodium silicate, sodium carbonate and sodium hydroxide, respectively. $.$ Chemical retting was faster than bacterial retting, but the color of chemically retted ramies were worse than that of bacterially retted ramies. $.$ The combination of bacterial and chemical processing showed some merits. A combination of either 2 or 3 days of bacterial and then chemical retting might provide the best quality ramie. $.$ Ramie fiber became cottonized ramie when retted in 8% NaOH solution for 6-8hours.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 1993년도 EARTH 발표논문초록
• /
• pp.11.2-12
• /
• 1993

• Bulletin of the Korean Chemical Society
• /
• 제32권9호
• /
• pp.3483-3485
• /
• 2011