• Computers and Concrete
• /
• 제11권5호
• /
• pp.475-492
• /
• 2013

Since the beginning of the 90 s, depending on the growth of the industrial sector in Turkey, factory constructions have been increased. The cost of precast concrete buildings is lower than the steel ones for this reason the precast structural systems are used more. Precast concrete structural elements are mostly as strong as not to have damage in the earthquake but weakness of connections between elements causes unexpected damages of structure during earthquake. When looking at the previous researches, it can be seen that there is a lack of studies about socket type base connections although there were many experimental and analytical studies about the connections of precast structural elements. The aim of this study is to investigate the stress transfer mechanism between column and the socket base wall with finite element method. For the finite element analysis ANSYS software was used. A finite element model was created which is the simulation of experimental research executed by Canha et al. (2009) under vertical and horizontal forces. Results of experimental research and finite element analysis were compared to create a successful simulation of experimental program. After determining the acceptable parameters, models of socket bases were created. Model dimensions were chosen according to square section column sizes 400, 450, 500, 550 and 600 mm which were mostly used in industrial buildings. As a result of this study, stress distribution at center section of the socket base models were observed and it is found that stress distribution affects triangular at the half of socket bottom and top.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.33-35
• /
• 2004

In this paper, web based monitoring systems are implemented for multi-axis force control systems of an intelligent robot. Linux operating systems are ported to an embedded system which Include a Xscale processor to implement a web based monitoring system. A device driver is developed to receive data from multi-axis force sensors of intelligent robots. To control this device driver, a socket program for Labview is also developed.

• 대한치과교정학회지
• /
• 제42권4호
• /
• pp.207-217
• /
• 2012

Objective: This study aimed to evaluate the effect of an intentionally created socket on bone remodeling with orthodontic tooth movement in rabbits. Methods: Eighteen male rabbits weighing 3.8 - 4.25 kg were used. An 8-mm deep and 2-mm wide socket was drilled in the bone 1 mm mesial to the right mandibular first premolar. The left first premolar was extracted to serve as an extraction socket. A traction force of 100 cN was applied to the right first premolar and left second premolar. Sections were obtained at the middle third of the moving tooth for both the drilled and extraction sockets and evaluated with hematoxylin and eosin staining and immunohistochemical analyses. The amount of tooth movement and tartrate-resistant acid phosphatase (TRAP)-positive cell count were compared between the 2 groups using the Mann-Whitney U test. Results: At week 2, the distance of tooth movement was significantly higher in the intentional socket group (p < 0.05) than in the extraction socket group. The number of TRAP-positive cells decreased in week 2 but increased in week 3 (p < 0.05). However, there were no significant differences between the groups. Furthermore, results of transforming growth factor (TGF)-${\beta}$ staining revealed no significant differences. Conclusions: The intentional socket group showed greater distance of tooth movement than did the extraction socket group at week 2. Osteoclast counts and results of immunohistochemical analyses suggested elevated bone remodeling in both the groups. Thus, osteotomy may be an effective modality for enhancing tooth movement in orthodontic treatment.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2012년도 제46차 하계학술발표논문집 20권2호
• /
• pp.279-280
• /
• 2012

PC방은 긴 역사를 가지고 있지는 않지만 꾸준히 많은 사람들이 이용하고 있으며 PC방의 수도 꾸준히 늘어나 포화상태에 이르게 되었다. 다른 업종과 달리 반짝하고 사라지는 업종이 아니기 때문에 관리자는 지속적으로 고객, 상품 등을 관리해야 할 필요가 있고, 고객의 요청이 생겼을 때 빠르고 신속하게 처리해주어야 한다. 본 논문에서는 PC방 관리시스템을 관리자가 운영함에 있어 소켓(Socket)과 스레드(Thread)를 이용하여 실시간으로 고객의 정보를 확인하고 신속하게 처리 할 수 있도록 하며, 매출현황 데이터를 참고하여 미래의 운영 계획을 세움에 있어 도움을 줄 수 있도록 하였다.

• 한국컴퓨터산업학회논문지
• /
• 제8권1호
• /
• pp.41-48
• /
• 2007

본 논문은 Java 기술을 이용하여 TCP/IP 상에서 웹 기반의 원격 감시제어시스템 개발에 대한 예를 제시하였다. Java의 Socket 클래스를 이용한 클라이언트/서버 소켓 프로그램을 구현하였고 이를 레고 블록으로 만든 온실 모델에 적용하여 웹 기반 온실 감시제어시스템을 구축하였다. 구축된 웹 기반 온실 감시제어시스템은 온실의 정보를 클라이언트 프로그램에 잘 전달하여 표시하며 웹 상에서 동작하는 Java Applet 클라이언트에서 보내는 제어 신호를 서버를 통해 온실 모델에 잘 전달하여 동작시키는 것을 볼 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.153-155
• /
• 2006

An automatic remote water measurement system was developed. This system sends automatic remote measured and collected water meters data automatically from the transmitter with CDMA modem through SK-Telecom network The water meter data are received through LAH TCP/IP and displayed as test file on IE(Internet Explorer) window. The existing water meters of mechanical type have so many problems to measure data. The person must visit the location of each water meters and write down the data records manually. In this system the RF module has attached each water meter Client/Server programs are developed by network socket programming.

• 대한임베디드공학회논문지
• /
• 제17권3호
• /
• pp.185-190
• /
• 2022

We propose a high speed data communication method for motor drive systems with fast control cycle in order to collect state variables of motor control without degrading control performance. Ethernet is chosen for communication device, and multi-core DSP architecture is exploited for communication processing load distribution. The communication program including network protocol stack and motor control program are assigned to two separate cores, and data between two cores are exchanged using interrupt-based inter-process communication mechanism, which enables to achieve a high-speed communication performance without degrading the motor control performance. The performance of developed communication method is demonstrated by real experiments using TCP, UDP and Raw Socket protocols in an experimental setup consisting of TI's TMS320F28388D motor control card and MS Windows PC.

• 비파괴검사학회지
• /
• 제24권3호
• /
• pp.275-281
• /
• 2004

대구경 배관에서 소구경 배관으로 연결하는 부위 및 배관의 방향 전환을 위해 사용하는 소켓용접부는 용입불량 및 사용시간이 경과되면서 내부로부터 진전될 수 있는 균열 등의 결함을 가질 수 있다. 그러나 지금까지 적용하고 있는 비파괴검사법인 액체침투탐상과 방사선투과검사로는 내부에 존재하는 균열성 결함의 검출이 어렵다. 본 연구에서는 소켓용접부 내부의 균열성 결함 검출을 위한 초음파 검사 기법을 확립하였고, 검사를 수행할 수 있는 초음파 탐촉자를 설계 제작하였으며, 자동으로 검사할 수 있는 검사 장비와 제어용 운영 프로그램을 개발하였다. 개발된 장비는 컴퓨터를 기반으로 하고 있으며, pulser/receiver를 내장하고 100 MHz 고속 A/D board를 사용하여 초음파 탐상기 역할을 프로그램으로 구현하였으며, ISA interface type으로 4축 제어용 motion controller를 개발하여 자동 검사를 수행하는 scanner를 제어하도록 하였으며, 검사 결과는 소켓용접부 단면을 실시간 영상으로 나타내도록 되어 있다. 인공결함 시험편의 결함을 평가한 결과 결함의 깊이가 1mm인 결함의 평가 길이는 실제 크기보다 작게 나타내고 있으며, 결함의 깊이가 증가할수록 결함의 길이가 더 크게 평가되었다. 본 연구로 개발한 장비는 원자력 발전소나 화학플랜트에 많이 널려 있는 소켓용접부 내의 용입불량, 피로 균열 등을 검출하여 객관적인 검사 결과를 제시할 수 있으므로 설비 안전 관리 및 보수 부위 결정에 기여할 수 있을 것으로 기대된다.

• Imaging Science in Dentistry
• /
• 제39권1호
• /
• pp.19-25
• /
• 2009

Purpose: To longitudinally observe the healing process of extracted socket and the alterations of the residual ridge in healthy adult dogs using cone beam CT (CBCT). Materials and Methods: The mandibular premolars of two beagle dogs were removed and the extraction sites were covered with the gingival tissue. CBCTs (3D X-ray CT scanner, Alphard vega, Asahi Co.) were taken at baseline and at 1 week interval for 12 weeks. Radiographic density of extracted wounds was measured on normalized images with a custom-made image analysis program. The amount of alveolar crestal resorption after the teeth extraction was measured with a reformatted three-dimensional image using CBCT. Bony healing pattern of extracted wound of each group was also longitudinally observed and analyzed. Results: Dimensional changes occurred during the first 6 weeks following the extraction of dogs' mandibular premolars. The reduction of the height of residual ridge was more pronounced at the buccal than at the lingual aspect of the extraction socket. Radiographic density of extracted wounds increased by week 4, but the change in density stabilized after week 6. New bone formation was observed at the floor and the peripheral side of extracted socket from week 1. The entrance of extracted socket was sealed by a hard-tissue bridge at week 5. Conclusion: The healing process of extracted wound involved a series of events including new bone formation and residual ridge resorption.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권1호
• /
• pp.78-85
• /
• 2014

하이브리드 통신을 지원하는 하이브리드 통신 신호처리 제어보드는 저전력의 32-bit 마이크로콘트 롤러인 Cortex M3로 설계하였다. 마이크로콘트롤러는 하이브리드 통신을 위한 모뎀과 GPS 모듈 등을 직렬 인터페이스하기 위한 UART 포트가 갖추어져 있으며, CLI(Command Line Interpreter) 프로그램은 각 포트의 인터페이스를 사용자 환경에 맞게 설정할 수 있다. 항로표지 원격관리 시스템에 사용되는 하이브리드 통신 신호처리 제어보드의 전송방식을 단문메시지 방식과 소켓 방식을 비교한 결과 소켓 방식의 우수함을 입증하였으며, 수신 성능의 개선을 통해 항로표지 원격관리 시스템의 데이터 손실을 최소화될 수 있도록 하였다. 실험은 12시간 동안 각 부표에서 매 1분마다 데이터를 취득하였으며, 데이터 수신율은 각각 98.58 %와 99.42 % 이상을 보였다.